462-69-10029XLP - 100% stainless steel exterior
- Includes laminated horn signal card and stainless steel mounting screws
- Type 304 stainless steel diaphragm
- dB(A) rating: 123 at one meter
- 5 Year Warranty
Size: 18.5" L x 8" W x 5" H, Volts: 12, Max Amps: 10 - 100% stainless steel exterior
- Includes laminated horn signal card and stainless steel mounting screws
- Type 304 stainless steel diaphragm
- dB(A) rating: 123 at one meter
- 5 Year Warranty
|
|
464-1016 Dual USB Charger Socket Black
Blue Sea Systems Dual USB Chargers provide 12VDC power to charge small electronic devices.
Features:
- Max current output: 2.1ADC
- Input voltage: 12VDC
- Output voltage: 5VDC +/- 5%
- Current draw: 15mA
- Charger socket mounts into a 12V outlet hole
|
|
462-626-11953 Provides better towing vision than any towing mirror out there! This innovative product features two fully adjustable mirror surfaces that allow you to fully customize your viewing area. The large, flat mirror surface gives an accurate perspective of what is behind you, while the smaller convex surface acts as a built-in spot mirror for increased safety while driving. The fully enclosed mirror head design reduces wind vibration, to ensure that the adjustable mirror surfaces stay where you put them. Features two adjustable arms and rubber straps that will not obstruct your existing mirror. : Sold: Each
|
|
420-907050 Dual Water Flush, 3/4" NPT
|
|
462-47-9895 Fits: Mercury and E-Tec Engine with Nose Cone Dual Water Pickup. Sold: Each
|
|
462-354-5885201 Injected Molded Nylon. Mounts easily to most surfaces with suction cups. Expands from dual to quad, mounts easily to most surfaces with suction cups. Description: Dual/Quad, Size: 8-1/8" Wide (Expands to 16-3/8")", Case: 6 Sold: Each
|
|
462-661-2702 Combine negative and positive buses on one block. Features tin-plated copper bus and stainless steel hardware. Continuous amperage of 100 amps. Maximum 48 volts DC. Gang: 10, Terminal Screw: #8-32
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Features heat resistant melamine body and abuse resistant nylon face. Use where salt or other corrosive elements are a problem Yellow corrosion resistant duplex receptacle 15 Amp 125 Volt - Features heat resistant melamine body and abuse resistant nylon face.
- Use where salt or other corrosive elements are a problem
- Yellow corrosion resistant duplex receptacle
- 15 Amp 125 Volt
: Sold: Each
|
|
462-16-24907 NO CLUTCH, so no freewheeling capability. Suitable for short-distance vertical lifting applications not involving people or loads over where people could be present. Used for Boat Lifts. NOTE: Not for movement of humans Max Load: 3000 lbs, Amps: 70, Volts: 12 Sold: Each
|
|
462-16-14934 Brake winch safety and rugged construction at a more economical price. Raise and lower loads with minimal effort, with load locked in place, even when handle is released. Zinc TUFFPLATE finish. Handle included. NOTE: Not for movement of humans Description: DLB1200A, Max Load: 1200 lbs, Gear Ratio: 5.4:1, Cable Size: 7/32" x 69' Sold: Each
|
|
462-16-24059 For mounting all StrongArm electric winches to trailer winch stands where insufficient room and improper angle are present. Black powder-coated finish. Hardware included. Description: Angle mounting plate Sold: Each
|
|
462-16-24085 Fits 6-16 gauge wire. For 12Volt DC winches. : Sold: Each
|
|
462-16-24052 "For 120 volt AC StrongArm winch models. This kit provides a 10-foot remote hand-held switch unit which can be wired directly to the winch. (Plug-in connector #6373 is optional.) The pendant has an "in-off-out" switch similar to the power switch provided on all 120 volt AC StrongArm models. Individually packaged." : Sold: Each
|
|
462-16-24110 "Universal right angle mounting bracket fits most hand winches up to 2000 lbs. capacity. Heavy 1/4" steel with tough powder coated bronze finish." Description: Universal mounting bracket, Fits: Most winches to 2000 lbs. Sold: Each
|
|
462-16-24350 For all D-L ratchet and brake winches. Includes rope/cable clamp, bolt and nut. Description: Rope cable clamp, Fits: D-L ratchet & brake winches Sold: Each
|
|
462-667-5119773NL The CDI peak reading voltage adapter is specifically designed to work with shielded digital multimeters. This adapter will simplify the testing of electronic ignition systems, stators, sensors and charging systems. The DVA readings will be approximately the same as any other DVA meter and the specifications listed in the service manuals can be followed without problems. : Sold: Each
|
|
462-762-E35 - Impeller Kit: 10615K
- Minor Repair Kit: 10999
- Major Repair Kit: 11068
- Impeller Kit: 10615K
- Minor Repair Kit: 10999
- Major Repair Kit: 11068
Engine: Crusader 220, 270, 300, 350, OEM #: 97179, Inlet: 1" NPT", Outlet: 1" NPT" Sold: Each
|
|
464-521500-1 Ear Muff Motor Flusher Circular
Seadog Ear Muff Style Motor Flushers are constructed of molded PVC and painted steel. Circular pads.
|
|
464-521520-1 Ear Muff Motor Flusher Rectangle
Seadog Ear Muff Style Motor Flushers are constructed of molded PVC and painted steel. Rectangular Pads.
|
|
462-47-5838 Style, long barrel. Replaces: Mercruiser 33261, 89902, Delco 1114356, 1114458 Sold: Each
|
|