Generic

"Designed for aluminum boats as a 1" drain for transom, livewell or baitwell. Easily flanged, fitting eliminates need for welding. An o-ring forms a watertight seal in .40" to .090" wall thickness."

Description: Fitting

Sold: Each

"Molded nylon. Designed to fit securely in a 1" hole without the use of fasteners. The ridges on the body of the drain plug are designed to keep the plug in place. Sealant should be applied prior to installation to make a watertight seal."

Pkg.: Card

Sold: Each

Drain Plug, 10 Pack. Replaces MerCruiser part # 22-806608A02 and 22-806608Q01

"Has a hole diameter of 1". Fastener is #10 RH. Sealant should be applied prior to installation to make a watertight seal."

Material: Chrome Brass, A: 1", B: 1-1/2", Pkg.: Display Card

Sold: Each

Drain Plug Nylon

The Seadog Drain Plug has an injection molded nylon construction with a molded-in recess in the base for a watertight seal.

• Size: (A) 1" (B) 1-1/2"
• Fastener: #10 FH

"Draincock 1/4" NPT"

Application: Cylinder Block, Size: 1/4" NPT", OEM #: Mercury 22-16951A1, 22-16951Q1, 22-16951T1; OMC 379957; Volvo 82745

Sold: Each

Drain Tube Brass 1" x 1-7/8"

Seadog tubes have a 1" diameter and a length of 1-7/8"

Drain Tube HDPE 3/4" - 2-1/2"

The Seadog Drain Tube is constructed of injection molded HDPE and has an adjustable body which can be expanded from 3/4" to 2-1/2" in length. It fits 1" openings.

Drain Tube Brass 1" x 2-7/8"

Seadog Drain Tubes are constructed of formed brass or aluminum. The aluminum drain tubes are recommended for use with aluminum boats only. All tubes have a 1" diameter.

3 Recessed to holes for flush fit to boat's transom or exterior, allowing water to drain when boat is trailered. Plug has screwdriver slot and rubber O-ring to seal water tight.

Description: Tube, Plug & O-Ring

Sold: Each

Drain Wingnut w/ O-Ring, 8/01 & Newer

Description: Drain Wingnut w/ O-ring , Fits: ARG 8-01 and later

Sold: Each

"Black graphics on a light gray dial background. Very low profile bezels follow the curve of the lens to eliminate water "trapping". Pointers are white with a black hub. Graphics light through the dial in blue. Black bezel."

Size: 2", Type: Voltmeter 12 Volt, Dial Range: 8-18 VDC, Sender Code: N/A

Sold: Each

"Black graphics on a light gray dial background. Very low profile bezels follow the curve of the lens to eliminate water "trapping". Pointers are white with a black hub. Graphics light through the dial in blue. Black bezel."

Size: 3", Type: Tach, Elect, Outboard & 4-Stroke Gas, Dial Range: 0-7000 rpm, Sender Code: O/B Alt or Coil

Sold: Each

"Black graphics on a light gray dial background. Very low profile bezels follow the curve of the lens to eliminate water "trapping". Pointers are white with a black hub. Graphics light through the dial in blue. Black bezel."

Size: 2", Type: Fuel Gauge, Dial Range: E-1/2-F, Sender Code: F

Sold: Each

"Injection molded ABS. Folds to a closed depth of 15/16"."

Color: Black, Size: 3-3/4" H x 3-7/8" W x 3-7/16" D", Case: 10

Drink Holder SS w/Drain

The Seadog Flush Mount Drink Holder with Drain Fitting is constructed of stainless steel with a rubber insert and will accommodate cans with or without insulated can wraps. The drain fitting uses a 1/4" hose and allows water to be drained to the bilge.

• Size: 3-11/16"/2-7/8"Dia x 3-3/16"D

Description: Lower Unit Seal Kit: For #1 Units, Replaces: 26-33144A2

Sold: Each

Drive Shaft End Yoke 1310

• Series: 1310
• Spline Count: 10
• Yoke Style: BS
• Hub Diameter R: 2.125
• C/L To End Hub S: 3.438
• Type: Splined Hole
• Outside Yoke Dimension (In) E: 3.219
• Yoke Bearing Dimension (In) D: 1.062
• Major Diameter: 1.375
  
• Length Thru Hole Q: 2.000
• Weight 2.03 LB

Description: Closed, Replaces: Mercruiser 27-864549A02

Sold: Each

Description: Open, Replaces: Mercruiser 27-864547A02

Sold: Each