The Blower Shop

Billet rear plate for The Blower Shop™s 192 and 250 superchargers. Polished exterior and coated inner face. Includes grease covers, gaskets, .308″ pins, and S.S. hardware. Note: Bearings and Seals not included.

• Weight: 4 lbs
• Dimensions: 14×8×6 in
• 71 / Low Profile: Low Profile

(8 ea.) 5/16″ Stainless Steel studs and nuts for 192 and 250 blowers.

• Weight: 7 lbs
• Dimensions: 4×4×4 in
• 71 / Low Profile: Low Profile

192/250 SHORT SNOUT FOR 8MM (3.95″)

• Weight: 8 lbs
• Dimensions: 14×10×6 in
• 71 / Low Profile: Low Profile
• Belt Style: 8MM

Snout gaskets to fit the TBS 192 and 250 superchargers.

• Dimensions: 4×4×.05 in
• 71 / Low Profile: Low Profile

TBS ACCESSORY SBC PULLEY Each V style pulley is meant to hold a certain amount of V style belts. Depending on your car’s application such belts could be used for air conditioning, alternator, power steering, etc. Machined from 6061 billet aluminum. -1V **Black anodizing available upon request. Special order, please call for details.**

• Weight: 3 lbs
• Dimensions: 6×6×3 in
• Accessory Pulley: 2V Accessory Pulley / SBC, 1V Accessory Pulley / SBC, 6 Rib Accessory Pulley / SBC (6.0" DIA.), 6 Rib Accessory Pulley / SBC (7.5" DIA.)
• Belt Style: 1V Accessory
• Engine Model: Small Block Chevy
• Finish: Polished, Black Hard Anodized

Designed to work with The Blower Shop's Front Discharge Superchargers this billet plate will set your Blower back 2 1/4″. Positioning the bottom outlet closer to the center of the manifold, this change in positioning effects the air/fuel mixture that is pushed through the manifold. Race Application Only.

• Weight: 10 lbs
• Dimensions: 20×13×1 in
• 71 / Low Profile: 71 Series

71 SERIES BELT GUARD STANDS AND BOLTS (4 PK.) POLISHED. INCLUDES 4 EA : 2 7/8″ POLISHED STAND 5/16-18 X 5 1/2″ S.H.C.S.

• Weight: 2 lbs
• Dimensions: 7×7×3 in
• 71 / Low Profile: 71 Series

1 7/8″ BRACKET STANDS W/BOLTS *( B ) (4 PK.)

• Weight: 1 lbs
• Dimensions: 6×3×1 in
• 71 / Low Profile: 71 Series

2.75" TOP PULLEY (10 RIB) KEYED POWERCHARGER

• Weight: 1 lbs
• Dimensions: 6×6×3 in
• Belt Style: 10 RIB Drive

2.75" TOP PULLEY (6 RIB) KEYED POWERCHARGER

• Weight: 1 lbs
• Dimensions: 6×6×3 in
• Belt Style: 6 RIB Drive

Everyone’s needs, like everyone’s cars, are unique to your end goal and how they want to achieve it. TBS helps supply those needs with or line of blower spacers giving you more options than before with blower hight when building your ideal set up. Cast Aluminum polished to a mirror-like finish that will include the hardware and gaskets to bring your setup to the height you need.

• Weight: 16 lbs
• Dimensions: 20×14×4 in
• 71 / Low Profile: 71 Series

#8632 – 2″ XR Stands and Bolts (3 PK.) (BLACK ANODIZED) XR Series Belt Guards Stand Chart: No Spacer: Fits 3.90” snout (or 5.45” overall) when mounted to front cover. Includes: 3/8 – 16 x 3/4″ Flat Head [x3] #8630 – .20” Spacer: Fits 5.15” snout (or 5.65” overall) when mounted to front cover. Includes: .20 Spacer [x3] 3/8 – 16 x 1” Flat Head [x3] #8631 – 1.20” Spacer: Fits 5.90” snout (or 6.65” overall) when mounted to front cover. Includes: 1.20” Spacer [x3] 3/8 – 16 x 2” Flat Head [x3] #8632 – 2” XR Stand: Fits 6.90” snout (or 7.45” overall) when mounted to front cover. Includes: 2” XR Stand [x3] 3/8 – 16 x 1” Flat Head [x3] 3/8 – 16 x 1.5” stud [x3] #8633 – 3” XR Stand: Fits 7.90” snout (or 8.45” overall) when mounted to front cover. Includes: 3” XR Stand [x3] 3/8 – 16 x 1” Flat Head [x3] 3/8 – 16 x 1.5” stud [x3] #8604 – Clamp for XR Belt Guard: Fits 5.90” – 8.40” Snouts. Includes: Belt Guard Clamp [x1] 1/4 – 20 x 1” S.H.C.S. [x2] *Installed in clamp. 3/8 – 16 x 3/4″ Flat Head [x3]

• Weight: 1 lbs
• Dimensions: 7×7×3 in
• 71 / Low Profile: 71 Series
• XR / Race: XR

2-3/4" Idler Pulley Stand

• Billet aluminum
• Better selection - 4" and 6" idler pulleys available
• Standard blower mount bracket • Competition block mount bracket
• This pulley stand is .980 in diameter
• Swing arm bracket

250 [HIGH HELIX] BIG BLOCK CHEVROLET KIT 2V STREET- 8MM. STANDARD DECK (9.8”) – (#3321) This TBS Low-Profile 250 Supercharger kit is specifically for Standard Deck Big Block Chevrolet applications. Designed for mild street use and comes as a complete kit for one convenient price. 250 8mm applications are showing great performance on large displacement bracket engines. This 8MM drive kit includes the 250 supercharger, standard deck big block manifold, and all necessary drive accessories required for assembly. It features a 2V accessory pulley, which allows two V-Style accessory belts to be driven off the crankshaft. Designed for SHORT WATER PUMP, street, marine or drag race applications. The 250 is a max 10lb boost application. FITS CONVENTIONAL STYLE 24° CYLINDER HEADS FOR BIG BLOCK CHEVROLET.

• 71 / Low Profile: Low Profile
• Belt Style: 2V
• Engine Model: Big Block Chevy
• Supercharger Model/Size: 250

250 BIG BLOCK CHEVROLET KIT 2V STREET- 8MM. TALL DECK (10.2”) – (#3326) This TBS Low-Profile 250 Supercharger kit is specifically for Tall Deck Big Block Chevrolet applications. Designed for mild street use and comes as a complete kit for one convenient price. 250 8mm applications are showing great performance on large displacement bracket engines. This 8MM drive kit includes the 250 supercharger, tall deck big block manifold, and all necessary drive accessories required for assembly. It features a 2V accessory pulley, which allows two V-Style accessory belts to be driven off the crankshaft. Designed for SHORT WATER PUMP, street, marine or drag race applications. The 250 is a max 10lb boost application. FITS CONVENTIONAL STYLE 24° CYLINDER HEADS FOR BIG BLOCK CHEVROLET.

• 71 / Low Profile: Low Profile
• Belt Style: 2V
• Engine Model: Big Block Chevy
• Supercharger Model/Size: 250

• Weight: 55 lbs
• Dimensions: 29×9×7 in
• 71 / Low Profile: Low Profile
• Supercharger Model/Size: 250

• Weight: 3 lbs
• Dimensions: 8×8×3 in
• 71 / Low Profile: Low Profile
• Belt Style: 8MM

The TBS Idler Bracket Assembly is machined from 6061 billet aluminum. With its increased strength over a swing arm, this is the desired choice for high horsepower applications.

• Weight: 3 lbs
• Dimensions: 8×8×3 in
• Stand Length: 1 3/4", 1.55", 2 3/4"
• 71 / Low Profile: Low Profile
• Belt Style: 8MM

The TBS Idler Bracket Assembly is machined from 6061 billet aluminum. With its increased strength over a swing arm, this is the desired choice for high horsepower applications.

• Weight: 3 lbs
• Dimensions: 8×8×3 in
• Stand Length: 1 3/4", 1.55", 2 3/4"
• 71 / Low Profile: Low Profile
• Belt Style: 8MM

250 BIG BLOCK CHEVROLET KIT 2V STREET- 8MM. STANDARD DECK (9.8”) – (#3121) This TBS Low-Profile 250 Supercharger kit is specifically for Standard Deck Big Block Chevrolet applications. Designed for mild street use and comes as a complete kit for one convenient price. 250 8mm applications are showing great performance on large displacement bracket engines. This 8MM drive kit includes the 250 supercharger, standard deck big block manifold, and all necessary drive accessories required for assembly. It features a 2V accessory pulley, which allows two V-Style accessory belts to be driven off the crankshaft. Designed for SHORT WATER PUMP, street, marine or drag race applications. The 250 is a max 10lb boost application. FITS CONVENTIONAL STYLE 24° CYLINDER HEADS FOR BIG BLOCK CHEVROLET.

• 71 / Low Profile: Low Profile
• Belt Style: 2V
• Deck Height: Standard Deck
• Engine Model: Big Block Chevy
• Supercharger Model/Size: 250