129-3113 192 SMALL BLOCK CHEVROLET- 6RIB ACCESSORY STREET 10RIB (#3113) The Blower Shop's TBS 192 Low-Profile series is designed specifically for small block Chevrolet engines. Designed as a mild street application to fit under stock hoods on hot rods, and comes as a complete kit for one convenient price. The kit includes the 192 supercharger, manifold, and all necessary drive accessories required for assembly. This drive kit includes a 10Rib serpentine style pulley, serpentine style drive belt and spring tensioned idler assembly. Designed for single carbureted mild street or marine use. The 192 is a max 10lb boost application. FITS CONVENTIONAL 23° CYLINDER HEADS FOR SMALL BLOCK CHEVROLET.
Specifications:
- 71 / Low Profile: Low Profile
- Belt Style: 6 RIB
- Engine Model: Small Block Chevy
- Supercharger Model/Size: 192
|
|
129-4524 IDLER PULLEY ASSEMBLY 10 RIB IDLER PULLEY ASSEMBLY 16 RIB 16 Rib Idler Pulley for 192/250 Blowers. Pulley includes stand and 7/16″ -14 bolt.
Specifications:
- Weight: 4 lbs
- Dimensions: 14×8×6 in
- Idler Pulley Assembly: 10 Rib, 16 Rib
- 71 / Low Profile: Low Profile
- Belt Style: 10 RIB Drive
|
|
129-4525 IDLER PULLEY ASSEMBLY 10 RIB IDLER PULLEY ASSEMBLY 16 RIB 16 Rib Idler Pulley for 192/250 Blowers. Pulley includes stand and 7/16″ -14 bolt.
Specifications:
- Weight: 4 lbs
- Dimensions: 14×8×6 in
- Idler Pulley Assembly: 10 Rib, 16 Rib
- 71 / Low Profile: Low Profile
- Belt Style: 16 RIB Drive
|
|
129-4548 Specifications:
- Weight: 3 lbs
- Dimensions: 8×8×3 in
- 71 / Low Profile: Low Profile
|
|
129-4549 Specifications:
- Weight: 3 lbs
- Dimensions: 8×8×3 in
- 71 / Low Profile: Low Profile
|
|
129-4547 Specifications:
- Weight: 3 lbs
- Dimensions: 8×8×3 in
- 71 / Low Profile: Low Profile
|
|
129-4554 TBS NEW FRONT COVER FOR 192/250 8MM APPLICATIONS. 3/8 X 16 THREADS IMPLEMENTED ON FRONT COVER TO ENHANCE OVERALL BLOWER INTEGRITY ON LARGE CUBIC INCH ENGINES. INCLUDES FRONT COVER GASKET, SNOUT GASKET, SIGHT GLASS, PRESSURE RELIEF VALVE AND DRAIN PLUG. WILL COME STANDARD ON ALL NEW 192/250 8MM BLOWER ORDERS. **PLEASE NOTE: ADDITIONAL PURCHASE OF NEW IDLER BRACKET STANDS IS NECESSARY. PREVIOUS IDLER BRACKET STANDS ARE NOT COMPATIBLE WITH NEW FRONT COVER. [250 BLOWER: PN# 4548 / 192 BLOWER: PN# 4549]
Specifications:
- Weight: 4 lbs
- Dimensions: 14×8×6 in
- 71 / Low Profile: Low Profile
- Belt Style: 8MM
|
|
129-9311 Bearing plate gasket for The Blower Shop™ 192 / 250 superchargers.
Specifications:
- Dimensions: 9×6×.05 in
- Gasket Thickness: .010 Thick, .015 Thick
- 71 / Low Profile: Low Profile
|
|
129-9312 Bearing plate gasket for The Blower Shop™ 192 / 250 superchargers.
Specifications:
- Dimensions: 9×6×.05 in
- Gasket Thickness: .010 Thick, .015 Thick
- 71 / Low Profile: Low Profile
|
|
129-8615 TBS 192/250 BELT GUARD (FITS SHORT & MEDIUM LENGTH SNOUTS) KIT INCLUDES 4qty (3.750” STANDS) 4qty (2.750” STANDS) AS WELL AS BELT GUARD FRONT AND REAR BRACKETS, CENTER STANDS AND ALL HARDWARE TO INSTALL. PRODUCT NOTE (THIS BELT GUARD WILL WORK WITH 8MM & SERPENTINE DRIVE SYSTEMS) With belt failure being a problem among supercharged motors, TBS has developed its own billet Belt Guard to counteract any possible damage. Assembled with an assortment of stand lengths it can accommodate room for all of The Blower Shop's snout lengths. The Blower Shop's Polished Belt Guards are machined from 6061 billet aluminum and utilize stainless steel hardware. A TBS Belt Guard is designed to protect vital components in the event of a belt failure, this is a must have for street rods and show cars alike. No additional mounting hardware is needed to secure these safety belt guards to your blown motor.
Specifications:
- Weight: 4 lbs
- Dimensions: 7×7×3 in
- 71 / Low Profile: Low Profile
|
|
129-8640 Specifications:
- Weight: 3 lbs
- Dimensions: 7×7×3 in
- 71 / Low Profile: Low Profile
|
|
129-8641 Specifications:
- Weight: 3 lbs
- Dimensions: 7×7×3 in
- 71 / Low Profile: Low Profile
|
|
129-4553 Billet Polished 192/250 Front Cover. Includes sight glass, pressure relief valve, drain plug, front cover gasket, snout gasket and 10 qty, 1/4 – 20 x 2 1/4″ SHCS bolts and washers.
Specifications:
- Weight: 4 lbs
- Dimensions: 14×8×6 in
- 71 / Low Profile: Low Profile
|
|
129-9310 Symmetrical front cover gasket for The Blower Shop™ 192 and 250 superchargers.
Specifications:
- Dimensions: 9×6×.05 in
- 71 / Low Profile: Low Profile
|
|
129-4551 Billet front plate for The Blower Shop™s 192 and 250 superchargers. Polished exterior and coated inner face. Includes billet bearing retainers plus hardware and two steel dowel locating pins. Note: Bearings and Seals not included.
Specifications:
- Weight: 4 lbs
- Dimensions: 14×8×6 in
- 71 / Low Profile: Low Profile
|
|
129-4560 Gears to be used with the 192 and 250 Blower Shop™ Superchargers. These gears are now for use with TBS replacement rotors for some of the Weiand and B&M Superchargers.
Specifications:
- Weight: 5 lbs
- Dimensions: 4×4×4 in
- 71 / Low Profile: Low Profile
|
|
129-9317 Grease cover gasket is for the 192/250 TBS superchargers only. Sold in pairs.
Specifications:
- Dimensions: 4×4×.05 in
- 71 / Low Profile: Low Profile
|
|
129-4559 Specifications:
- Weight: 1 lbs
- Dimensions: 4×4×4 in
- 71 / Low Profile: Low Profile
|
|
129-4513 Specifications:
- Weight: 10 lbs
- Dimensions: 14×10×6 in
- 71 / Low Profile: Low Profile
- Belt Style: 8MM
|
|
129-4512 192/250 MEDIUM SNOUT FOR 8MM (4.95")
Specifications:
- Weight: 8 lbs
- Dimensions: 14×10×6 in
- 71 / Low Profile: Low Profile
- Belt Style: 8MM
|
|
