The Blower Shop

6.375″ OAL TBS BELT GUARD (FITS 3.90″ TO 4.90″ SNOUT) [#8606] With belt failure being a problem among supercharged motors, TBS has developed its own billet Belt Guard to counteract the possible damage. Assembled with an assortment of stand lengths it can accommodate room for all of The Blower Shop's snout lengths. The Blower Shop's Polished Belt Guards are machined from 6061 billet aluminum and utilize stainless steel hardware. A TBS Belt Guard is designed to protect vital components in the event of a belt failure, this is a must have for street rods and show cars alike. No additional mounting hardware is needed to secure these safety belt guards to your blown motor. Features : – Easily mounts to existing hardware – Works with Roots style blowers – Accommodates pulleys up to 7″ in diameter – NHRA / IHRA Required Belt Guard Chart: #8605: Fits snouts 3.90” and smaller No stands. 5/16 – 18 x 2.5” [x4] #8606: Fits 3.90” – 4.90” snout. 7/8” stands [x4] 5/16 – 18 x 3.5” [x4] #8607: Fits 4.90” – 5.90” snout. 1 7/8” stands [x4] 5/16 – 18 x 4.5” [x4] #8608: Fits 5.90” – 6.90” snout. 2 7/8” stands [x4] 5/16 – 18 x 5.5” [x4] GUARDS BELOW USE BELT GUARD STUDS #8609: Fits 6.90” – 7.90” snout. 3 7/8” stands [x4] Belt guard studs [x4] 5/16 – 18 x 1” [x4] #8610: Fits 7.90” – 8.90” snout. 4 7/8” stands [x4] Belt guard studs [x4] 5/16 – 18 x 1” [x4] #8611: Fits 8.90” – 9.90” snout. 5 7/8” stands [x4] Belt guard studs [x4] 5/16 – 18 x 1” [x4]

• Weight: 3 lbs
• Dimensions: 9×8×4 in
• Length: 5 1/2 Inch (No Stands), 6 3/8 Inch, 7 3/8 Inch, 8 3/8 Inch, 9 3/8 Inch, 10 3/8 Inch, 11 3/8 Inch, TBS XR (Only) No Stands – BLACK
• 71 / Low Profile: 71 Series
• Finish: Polished, Black Hard Anodized

Here at The Blower Shop™ we use high quality 6061 billet aluminum to manufacture The Blower Shop's pulleys. This pulley is machined to a precise specification to ensure proper fit and performance. Designed for The Blower Shop's TBS 192/250 Blowers ONLY*

• Weight: 3 lbs
• Dimensions: 6×6×4 in
• Pulley Width: 16 Rib, 10 Rib
• 71 / Low Profile: Low Profile
• Belt Style: 10 RIB Drive

Here at The Blower Shop™ we use high quality 6061 billet aluminum to manufacture The Blower Shop's pulleys. This pulley is machined to a precise specification to ensure proper fit and performance. Designed for The Blower Shop's TBS 192/250 Blowers ONLY*

• Weight: 5 lbs
• Dimensions: 6×6×4 in
• Pulley Width: 16 Rib, 10 Rib
• 71 / Low Profile: Low Profile
• Belt Style: 16 RIB Drive

6” TOP INSERT FOR XR-1 RACE SUPERCHARGERS (#2106) TBS XR Race Inserts are machined from 6061 billet aluminum in several sizes to accommodate specifically to your application giving you the ability to tune boost to track conditions and engine configuration. These Race Inserts provide more velocity to the fuel/air charge and allow you to match the fuel curve to boost curve, allowing the two to become linear to each other. You can tune when the boost is delivered, whether that’s immediately off the line or gradually as the engine speed increases. Below is a youtube video describing the usages and available sizes.

• Weight: 4 lbs
• Dimensions: 16×9×3 in
• 71 / Low Profile: 71 Series
• XR / Race: XR

600-H-300 (60" x 3") 120 Tooth

The belts are listed by their proper metric identification (length / pitch / width, expressed in millimeters), followed by the US conversion of length and width, and finally, the tooth count of the belt The full scale profile schematics shown for each style belt can further help you in identifying which belt you might be presently using, plus inform you of the materials used in it's construction Gates Rubber Company, the manufacturer of these belts, recommends you do not interchange the HTD and GT belt and pulley profiles

630-H-300 (63" x 3") 126 Tooth

The belts are listed by their proper metric identification (length / pitch / width, expressed in millimeters), followed by the US conversion of length and width, and finally, the tooth count of the belt The full scale profile schematics shown for each style belt can further help you in identifying which belt you might be presently using, plus inform you of the materials used in it's construction Gates Rubber Company, the manufacturer of these belts, recommends you do not interchange the HTD and GT belt and pulley profiles

TBS 8mm 64 tooth bottom pulley that fits any TBS 192/250 supercharger and works with the all-new 8mm pulleys.

• Weight: 3 lbs
• Dimensions: 7×7×4 in
• Stand Length: 1 3/4", 1.55", 2 3/4"
• 71 / Low Profile: Low Profile
• Belt Style: 8MM

6-71 BILLET EFI INJECTOR CASE- HIGH HELIX BILLET ROTORS (6PT TEFLON) (#2319) TBS now offers a unique blower case tailored directly to EFI. This 6-71 Billet Aluminum Supercharger features drilled EFI ports in the side of the blower case. This increases performance as air flows better and more efficiently when it is dry. By Injecting fuel mid way in the case, it allows air to fill the rotor cavity at a higher velocity, which increases volume and boost capabilities while also keeping the blower cool. This blower will fit any TBS Big Block or Small Block drive kit. Shop drive kits here, SHOP TBS DRIVE KITS *INJECTORS AND SNOUT NOT INCLUDED* All superchargers are BUILT TO ORDER. Please call 208-985-7650 to confirm build times.

• Weight: 83 lbs
• Dimensions: 26×13×7 in
• 71 / Low Profile: 71 Series
• Fuel Delivery: EFI
• Supercharger Model/Size: 671

6-71 billet rotor sets are pinned and balanced, and come machined for 6 point teflon strips and are hard anodized for durability. You can add 18 point teflon (TBS-1003) for an additional charge.

• Weight: 31 lbs
• Dimensions: 26×13×7 in
• Gas or XR: 6-71 Billet Rotor Set H.A. (Gas), 6-71 Billet Rotor Set H.A. (XR)
• 71 / Low Profile: 71 Series
• Supercharger Model/Size: 671

• Weight: 31 lbs
• Dimensions: 26×13×7 in
• 71 / Low Profile: 71 Series
• Supercharger Model/Size: 671
• XR / Race: XR

TBS 6-71 RACE CASE- RETRO FRONT DISCHARGE (#2015) (8-71 Blower Pictured) Since 1984 The Blower Shop™ has been manufacturing the best Race Blowers on the market. We have customers from all over the world earning records and championships using The Blower Shop's superchargers, all while providing us with unbiased feedback and data. Every TBS Race Blower has countless hours of research and development behind its design, showing proven performance for The Blower Shop's customers every pass. The TBS Race Series is intended for RACE USE ONLY on applications with minimal idle time. All Retro Front Discharge Cases require a 2 1/4 Set Back Plate. Shop Here: SET BACK PLATE #2505 All Superchargers are BUILT TO ORDER. Please call 208-985-7650 to confirm build time.

• Weight: 85 lbs
• Dimensions: 26×13×9 in
• 71 / Low Profile: 71 Series
• Supercharger Model/Size: 671
• XR / Race: Race

TBS 6-71 RACE SUPERCHARGER – HIGH HELIX BILLET ROTORS (#2016) (10-71 Blower Pictured) Since 1984 The Blower Shop™ has been manufacturing the best Race Blowers on the market. We have customers from all over the world earning records and championships using The Blower Shop's superchargers, all while providing us with unbiased feedback and data. Every TBS Race Blower has countless hours of research and development behind its design, showing proven performance for The Blower Shop's customers every pass. The TBS Race Series is intended for RACE USE ONLY on applications with minimal idle time. All Superchargers are BUILT TO ORDER. Please call 208-985-7650 to confirm build time.

• Weight: 83 lbs
• Dimensions: 26×13×9 in
• 71 / Low Profile: 71 Series
• Supercharger Model/Size: 671
• XR / Race: Race

6-71 Race (8-71 Blower Pictured) Since 1984 The Blower Shop™ has been manufacturing the best Race Blowers on the market. Today, nothing has changed. We have customers all over the world earning titles and championships using The Blower Shop's superchargers, all while providing us with unbiased feedback and data. Every Race Blower we build has countless hours of Research and Development behind its design, which equates to Proven Performance for The Blower Shop's customers, every time. If winning races is what you’re interested in, The Blower Shop™ has your answer. Designed for Track use ONLY Ready for Race ONLY Marine applications Excellent for Race applications under 500 CID Great for Nostalgia Classes 2 ¼” Set Back Plate Required (“Retro”)

• Weight: 85 lbs
• Dimensions: 26×13×9 in
• 71 / Low Profile: 71 Series
• Supercharger Model/Size: 671
• XR / Race: Race

This is a brand new heat treated steel gear set for the 6-71 roots style blower.

• Weight: 10 lbs
• Dimensions: 4×4×4 in
• 71 / Low Profile: 71 Series
• Supercharger Model/Size: 671

TBS 6-71 RACE SUPERCHARGER – BILLET ROTOR (#2014) (10-71 Blower Pictured) Since 1984 The Blower Shop™ has been manufacturing the best Race Blowers on the market. We have customers from all over the world earning records and championships using The Blower Shop's superchargers, all while providing us with unbiased feedback and data. Every TBS Race Blower has countless hours of research and development behind its design, showing proven performance for The Blower Shop's customers every pass. The TBS Race Series is intended for RACE USE ONLY on applications with minimal idle time. All Superchargers are BUILT TO ORDER. Please call 208-985-7650 to confirm build time.

• Weight: 83 lbs
• Dimensions: 26×13×9 in
• 71 / Low Profile: 71 Series
• Supercharger Model/Size: 671
• XR / Race: Race

The 6-71 Supercharger has been around for a long time, dating as far back as the 1960’s. In an effort to decrease ETs at the drag strip, racers would convert Detroit Diesel blowers to work on big block and small block gas engines. Since then supercharging technology has come a long way and here at The Blower Shop™ we are continually working to stay ahead of the curve when it comes to The Blower Shop's 6-71 style superchargers. If you demand Performance, Hand-Built Quality, and reliability from your blower, look no further. **All blowers will come polished by default regardless of case material (billet or cast). Satin finish (cast only) and black hard anodizing is available at an extra charge, but are not available through online orders. Please call us to place special orders.

• Weight: 85 lbs
• Dimensions: 26×13×9 in
• Case Type: TBS Billet Case
• 71 / Low Profile: 71 Series
• Supercharger Model/Size: 671
• Rotor Type: 3 Lobe High-Helix (Billet) w/ 6 Point Teflon

6-71 THROUGH 14-71 UNIVERSAL BASE GASKET 10 PK

• Weight: 1 lbs
• Dimensions: 19×12.25×.6 in
• 71 / Low Profile: 71 Series

Used from The Blower Shop's 6-71 all the way to The Blower Shop's 14-71 this base gasket can cover it all, in green!

• Weight: 0.1 lbs
• Dimensions: 19×12.25×.1 in
• Single or 10 Pack: Single, 10 Pack
• 71 / Low Profile: 71 Series

671/14-71 Polished Intercooler

If you are seeking to purchase a new intercooler for not only its added horsepower but its great aggressive appearance and only the very best will do Look no further! Since the Blower Shop has introduced its all new "Billet" intercooler that's CNC machined from one massive stock of 6061-T6 aluminum comes this show piece but they didn't stop there they used the latest in aircraft technology intercooling to develop one of the best performing intercoolers anywhere at any price But that's just it, they did all of this and yet still made it affordable and a great value. Includes mounting hardware and 2 base gaskets.

TBS 8mm 67 tooth bottom pulley that fits any TBS 192/250 supercharger and works with the all-new 8mm pulleys.

• Weight: 3 lbs
• Dimensions: 7×7×4 in
• Stand Length: 1 3/4", 1.55", 2 3/4"
• 71 / Low Profile: Low Profile
• Belt Style: 8MM