The Blower Shop

TBS Carburetor Adapters are CNC machined with the highest level of precision. Polished to a mirror like finish, they not only match The Blower Shop's line of show quality polished blowers, but they complete the seamless transition between the carburetor and the supercharger. **Black anodizing available upon request. Special order, please call for details.**

• Weight: 2 lbs
• Dimensions: 7×1.5×15 in
• 71 / Low Profile: Low Profile
• Fuel Delivery: Carb

Carb gasket for a 4500 style carburetor in a .125″ thickness.

• Weight: 0.1 lbs
• Dimensions: 6×6×.125 in
• Carburetor Style: 4150 Gasket, 4500 Gasket
• Fuel Delivery: Carb

71 SERIES BELT GUARD STANDS AND BOLTS (4 PK.) POLISHED. INCLUDES 4 EA : 5 7/8″ POLISHED STAND 5/16-18 X 3 1/2″ STUD 5/16-18 X 1″ SS S.H.C.S.

• Weight: 2 lbs
• Dimensions: 7×7×3 in
• 71 / Low Profile: 71 Series

• Weight: 5 lbs
• Dimensions: 16×9×3 in
• 71 / Low Profile: 71 Series
• XR / Race: XR

5.15" Billet Supercharger Drive Snout w/ Coupler

• CNC machined billet aluminum

• Heat treated 4340 main shaft and coupler with 1-1/4" shaft diameter
• Stronger than 1-1/8" diameter shaft used on most competitors street kits
• 3.90", 5.15" and 5.90" lengths
• Suitable for competition

Heat Treated Coupler for the TBS Supercharger snouts.

• Weight: 3 lbs
• Dimensions: 6×6×6 in
• Coupler Length: 3.90" Coupler, 5.15" Coupler, 5.90" Coupler, 6.90" Coupler
• 71 / Low Profile: 71 Series

5.35” TOP INSERT FOR XR-1 RACE SUPERCHARGER (#2108) TBS XR Race Inserts are machined from 6061 billet aluminum in several sizes to accommodate specifically to your application giving you the ability to tune boost to track conditions and engine configuration. These Race Inserts provide more velocity to the fuel/air charge and allow you to match the fuel curve to boost curve, allowing the two to become linear to each other. You can tune when the boost is delivered, whether that’s immediately off the line or gradually as the engine speed increases. Below is a youtube video describing the usages and available sizes.

• Weight: 5 lbs
• Dimensions: 16×9×3 in
• 71 / Low Profile: 71 Series
• XR / Race: XR

5.5” TOP INSERT FOR XR-1 RACE SUPERCHARGER (#2107) TBS XR Race Inserts are machined from 6061 billet aluminum in several sizes to accommodate specifically to your application giving you the ability to tune boost to track conditions and engine configuration. These Race Inserts provide more velocity to the fuel/air charge and allow you to match the fuel curve to boost curve, allowing the two to become linear to each other. You can tune when the boost is delivered, whether that’s immediately off the line or gradually as the engine speed increases. Below is a youtube video describing the usages and available sizes.

• Weight: 4 lbs
• Dimensions: 16×9×3 in
• 71 / Low Profile: 71 Series
• XR / Race: XR

5.50″ TBS BELT GUARD ONLY (NO STANDS) [#8605] With belt failure being a problem among supercharged motors, TBS has developed its own billet Belt Guard to counteract the possible damage. Assembled with an assortment of stand lengths it can accommodate room for all of The Blower Shop's snout lengths. The Blower Shop's Polished Belt Guards are machined from 6061 billet aluminum and utilize stainless steel hardware. A TBS Belt Guard is designed to protect vital components in the event of a belt failure, this is a must have for street rods and show cars alike. No additional mounting hardware is needed to secure these safety belt guards to your blown motor. Features : – Easily mounts to existing hardware – Works with Roots style blowers – Accommodates pulleys up to 7″ in diameter – NHRA / IHRA Required Belt Guard Chart: #8605: Fits snouts 3.90” and smaller No stands. 5/16 – 18 x 2.5” [x4] #8606: Fits 3.90” – 4.90” snout. 7/8” stands [x4] 5/16 – 18 x 3.5” [x4] #8607: Fits 4.90” – 5.90” snout. 1 7/8” stands [x4] 5/16 – 18 x 4.5” [x4] #8608: Fits 5.90” – 6.90” snout. 2 7/8” stands [x4] 5/16 – 18 x 5.5” [x4] GUARDS BELOW USE BELT GUARD STUDS #8609: Fits 6.90” – 7.90” snout. 3 7/8” stands [x4] Belt guard studs [x4] 5/16 – 18 x 1” [x4] #8610: Fits 7.90” – 8.90” snout. 4 7/8” stands [x4] Belt guard studs [x4] 5/16 – 18 x 1” [x4] #8611: Fits 8.90” – 9.90” snout. 5 7/8” stands [x4] Belt guard studs [x4] 5/16 – 18 x 1” [x4]

• Weight: 4 lbs
• Dimensions: 9×8×4 in
• Length: 5 1/2 Inch (No Stands)
• 71 / Low Profile: 71 Series
• Finish: Polished, Black Hard Anodized

5.90" Billet Supercharger Drive Snout w/ Coupler

• CNC machined billet aluminum

• Heat treated 4340 main shaft and coupler with 1-1/4" shaft diameter
• Stronger than 1-1/8" diameter shaft used on most competitors street kits
• 3.90", 5.15" and 5.90" lengths
• Suitable for competition

5/16-18 X 3 1/2" STEEL STUD (EA.) [STD FRONT PLATE]

• Weight: 1 lbs
• Dimensions: 4×4×4 in
• 71 / Low Profile: 71 Series

• Weight: 1 lbs
• Dimensions: 4×4×4 in
• 71 / Low Profile: 71 Series

540-H-300 (54" x 3") 108 Tooth

The belts are listed by their proper metric identification (length / pitch / width, expressed in millimeters), followed by the US conversion of length and width, and finally, the tooth count of the belt The full scale profile schematics shown for each style belt can further help you in identifying which belt you might be presently using, plus inform you of the materials used in it's construction Gates Rubber Company, the manufacturer of these belts, recommends you do not interchange the HTD and GT belt and pulley profiles

570-H-300 (57" x 3") 114 Tooth

The belts are listed by their proper metric identification (length / pitch / width, expressed in millimeters), followed by the US conversion of length and width, and finally, the tooth count of the belt The full scale profile schematics shown for each style belt can further help you in identifying which belt you might be presently using, plus inform you of the materials used in it's construction Gates Rubber Company, the manufacturer of these belts, recommends you do not interchange the HTD and GT belt and pulley profiles

585-H-300 (58 5" x 3") 117 Tooth

The belts are listed by their proper metric identification (length / pitch / width, expressed in millimeters), followed by the US conversion of length and width, and finally, the tooth count of the belt The full scale profile schematics shown for each style belt can further help you in identifying which belt you might be presently using, plus inform you of the materials used in it's construction Gates Rubber Company, the manufacturer of these belts, recommends you do not interchange the HTD and GT belt and pulley profiles

TBS ACCESSORY BBC PULLEYS Each 6 Rib style pulley is meant to hold a 6 Rib style belt. Depending on your application, these belts could be used for air conditioning, alternator, power steering, etc. Machined from 6061 Billet Aluminum Hard Anodized (Marine Pulleys Only) Hardware Included **Black anodizing available upon request. Special order, please call for details.**

• Weight: 4 lbs
• Dimensions: 6×6×3 in
• Accessory Pulley / BBC: 1V Accessory Pulley / BBC, 2V Accessory Pulley / BBC, 6 Rib Accessory Pulley / BBC (6.0" DIA.), 6 Rib Accessory Pulley / BBC (7.5" DIA.), 3V Accessory Pulley / BBC, 6 Rib Acc. Pulley / BBC (Replaces Merc Steel) 2.750" Wide, 6 Rib Acc. Pulley / BBC (Merc HP 500) 1.80" Wide
• Belt Style: 6 RIB Drive
• Engine Model: Big Block Chevy
• Finish: Polished, Black Hard Anodized

TBS ACCESSORY SBC PULLEY Each V style pulley is meant to hold a certain amount of V style belts. Depending on your car’s application such belts could be used for air conditioning, alternator, power steering, etc. Machined from 6061 billet aluminum, these show ready pulleys are heat treated for maximum durability. **Black anodizing available upon request. Special order, please call for details.**

• Weight: 4 lbs
• Dimensions: 6×6×3 in
• Accessory Pulley: 2V Accessory Pulley / SBC, 1V Accessory Pulley / SBC, 6 Rib Accessory Pulley / SBC (6.0" DIA.), 6 Rib Accessory Pulley / SBC (7.5" DIA.)
• Belt Style: 6 RIB Drive
• Engine Model: Small Block Chevy
• Finish: Polished, Black Hard Anodized

TBS ACCESSORY BBC PULLEYS Each 6 Rib style pulley is meant to hold a 6 Rib style belt. Depending on your application, these belts could be used for air conditioning, alternator, power steering, etc. Machined from 6061 Billet Aluminum Hard Anodized (Marine Pulleys Only) Hardware Included **Black anodizing available upon request. Special order, please call for details. **

• Weight: 6 lbs
• Dimensions: 6×6×4 in
• Accessory Pulley: 2V Accessory Pulley / SBC, 1V Accessory Pulley / SBC, 6 Rib Accessory Pulley / SBC (6.0" DIA.), 6 Rib Accessory Pulley / SBC (7.5" DIA.)
• Belt Style: 6 RIB Drive
• Engine Model: Small Block Chevy
• Finish: Polished, Black Hard Anodized

TBS 6 RIB ACCESSORY PULLEY CRANK HUB

• Weight: 5 lbs
• Dimensions: 6×6×3 in
• Belt Style: 6 RIB Drive
• Finish: Polished, Black Hard Anodized

6" Idler Pulley Assembly

• Billet aluminum

• Better selection - 4" and 6" idler pulleys available

• Standard blower mount bracket • Competition block mount bracket
• Swing arm bracket