137-9415 Mayfair Dual Bravo/Dual Ram Add-On Hydraulic Steering Kit
(Ram Mounting Location is 9" from the side of the Gimbal Housing)
Mayfair's "NEW" Modular Wing Plate Add-On Hydraulic Steering Systems
Mayfair by Hardin Marines Innovation has once again brought to the performance power boat and recreational sport boat industry a steering revelation with its all new modular wing plate steering systems. By using 21st century manufacturing techniques Mayfair by Hardin Marine has developed a superior 316L Stainless modular wing plate steering mount. This wing plate steering mount design incorporates dual side links and a single rear load cap that bolt together forming a strong bridge like cradle that provides the ability to mount the wing plate to the boats key attachment points. The rear load cap captures the outdrives rear end cap while the side links attach to the outdrives four mounting points at the Gimbal housing. This arrangement gives additional support for even tighter, firmer steering control. Best of all there is no disassembly of your outdrives rear end cap (Voids Factory Warranties) and these new systems fit all generations of Bravo outdrives including the new "Slope Back" style. Generally speaking, it is recommended to use external power steering on boats which run in excess of 70 MPH, however there are some boats that run 60 MPH that would benefit from the use of external power steering.
The Mayfair Add-On Hydraulic Steering System includes:
As you will see in the following pages there has never been more option, more choices, and more ways to save than ever before on the purchase of a new hydraulic steering system. We are constantly asked which system is "best" and "why"? Well, all of the systems listed here are of the very best in quality. What separates them in many cases is very minor features such as fitment options or how complete the kit is. Some manufactures provide the bare minimum and save through the use of possibly rubber lines, aluminum components instead of stainless steel, etc. At the end of the day what makes a great steering system is "Value" all of these systems will meet your needs some will just leave a big chunk of your money ($$$$) still in your wallet. Compare and save "NO ONE" can save you more money on your new steering system than we can, try us the answers are crystal clear.
Note: It is required to use either the Brazilian steering manifold (135-1040) or Saginaw shuttle valve fittings (135-1070) which are sold separately.
|
|
137-9412 Mayfair Dual Bravo/Dual Ram Add-On Hydraulic Steering Kit
(Ram Mounting Location is 17-3/4" from the side of the Gimbal Housing)
Mayfair's "NEW" Modular Wing Plate Add-On Hydraulic Steering Systems
Mayfair by Hardin Marines Innovation has once again brought to the performance powerboat and recreational sport boat industry a steering revelation with its all new modular wing plate steering systems. By using 21st century manufacturing techniques Mayfair by Hardin Marine has developed a superior 316L Stainless modular wing plate steering mount. This wing plate steering mount design incorporates dual side links and a single rear load cap that bolt together forming a strong bridge like cradle that provides the ability to mount the wing plate to the boats key attachment points. The rear load cap captures the outdrives rear end cap while the side links attach to the outdrives four mounting points at the Gimbal housing. This arrangement gives additional support for even tighter, firmer steering control. Best of all there is no disassembly of your outdrives rear end cap (Voids Factory Warranties) and these new systems fit all generations of Bravo outdrives including the new "Slope Back" style. Generally speaking, it is recommended to use external power steering on boats which run in excess of 70 MPH, however there are some boats that run 60 MPH that would benefit from the use of external power steering.
The Mayfair Add-On Hydraulic Steering System includes:
As you will see in the following pages there has never been more option, more choices, and more ways to save than ever before on the purchase of a new hydraulic steering system. We are constantly asked which system is "best" and"why"? Well, all of the systems listed here are of the very best in quality. What separates them in many cases is very minor features such as fitment options or how complete the kit is. Some manufactures provide the bare minimum and save through the use of possibly rubber lines, aluminum components instead of stainless steel, etc. At the end of the day what makes a great steering system is "Value" all of these systems will meet your needs some will just leave a big chunk of your money ($$$$) still in your wallet. Compare and save "NO ONE" can save you more money on your new steering system than we can,try us the answers are crystal clear.
Note: It is required to use either the Brazilian steering manifold (135-1040) or Saginaw shuttle valve fittings (135-1070) which are sold separately.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Mayfair's Full Hydraulic Steering Kit for Dual Bravos with Dual 7" Stroke Rams for Narrow Mounts (9" from Gimbal Housing) featuring the 316L Stainless Steel Modular Wing Plate that requires no modification to your outdrive.
- 316L Stainless Steel modular wing plate steering mount.
- Ram Mounting Location is 9" from the side of the Gimbal Housing allows for system to fit in applications where space is at a premium.
- The wing plate steering mount design incorporates dual side links and a single rear load cap that bolt together.
- The rear load cap captures the outdrives rear end cap while the side links attach to the outdrives four mounting points at the Gimbal housing.
- This arrangement gives additional support for even tighter, firmer steering control.
- No dis-assembly of your outdrives rear end cap (Voids Factory Warranties) is required.
- These new systems fit all generations of Bravo outdrives including the new "Slope Back" style.
- it is recommended to use external power steering on boats which run in excess of 70 MPH.
- There are some boats that run 60 MPH that would benefit from the use of external power steering.
- Your choice of 4", 6" or 8" fixed steering posts, or upgrade to tilt steering post in standard 5-1/2", 7-1/2"and 9-1/2" lengths!
- 80 ft. of hydraulic hose is included. See related parts if you need additional hose.
This kit includes:
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Mayfair's Full Hydraulic Steering Kit for Dual Bravo with Dual 9" Stroke Rams (17-3/4" from Gimbal Housing) featuring the 316L Stainless Steel Modular Wing Plate that requires no modification to your outdrive.
- 316L Stainless Steel modular wing plate steering mount.
- Ram Mounting Location is 17-3/4" from the side of the Gimbal Housing allows for system to fit in applications where space is at a premium.
- The wing plate steering mount design incorporates dual side links and a single rear load cap that bolt together.
- The rear load cap captures the outdrives rear end cap while the side links attach to the outdrives four mounting points at the Gimbal housing.
- This arrangement gives additional support for even tighter, firmer steering control.
- No dis-assembly of your outdrives rear end cap (Voids Factory Warranties) is required.
- These new systems fit all generations of Bravo outdrives including the new "Slope Back" style.
- it is recommended to use external power steering on boats which run in excess of 70 MPH.
- There are some boats that run 60 MPH that would benefit from the use of external power steering.
- Your choice of 4", 6" or 8" fixed steering posts, or upgrade to tilt steering post in standard 5-1/2", 7-1/2"and 9-1/2" lengths!
- 80 ft. of hydraulic hose is included. See related parts if you need additional hose.
This kit includes:
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Mayfair's Full Hydraulic Steering Kit for Single Bravo with Dual 7" Stroke Rams for Narrow Mounts (9" from Gimbal Housing) featuring the 316L Stainless Steel Modular Wing Plate that requires no modification to your outdrive.
- 316L Stainless Steel modular wing plate steering mount.
- Ram Mounting Location is 9" from the side of the Gimbal Housing allows for system to fit in applications where space is at a premium.
- The wing plate steering mount design incorporates dual side links and a single rear load cap that bolt together.
- The rear load cap captures the outdrives rear end cap while the side links attach to the outdrives four mounting points at the Gimbal housing.
- This arrangement gives additional support for even tighter, firmer steering control.
- No dis-assembly of your outdrives rear end cap (Voids Factory Warranties) is required.
- These new systems fit all generations of Bravo outdrives including the new "Slope Back" style.
- it is recommended to use external power steering on boats which run in excess of 70 MPH.
- There are some boats that run 60 MPH that would benefit from the use of external power steering.
- Your choice of 4", 6" or 8" fixed steering posts, or upgrade to tilt steering post in standard 5-1/2", 7-1/2"and 9-1/2" lengths!
- 80 ft. of hydraulic hose is included. See related parts if you need additional hose.
This kit includes:
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Mayfair's Full Hydraulic Steering Kit for Single Bravo with Dual 9" Stroke Rams (17-3/4" from Gimbal Housing) featuring the 316L Stainless Steel Modular Wing Plate that requires no modification to your outdrive.
- 316L Stainless Steel modular wing plate steering mount.
- Ram Mounting Location is 17-3/4" from the side of the Gimbal Housing allows for system to fit in applications where space is at a premium.
- The wing plate steering mount design incorporates dual side links and a single rear load cap that bolt together.
- The rear load cap captures the outdrives rear end cap while the side links attach to the outdrives four mounting points at the Gimbal housing.
- This arrangement gives additional support for even tighter, firmer steering control.
- No dis-assembly of your outdrives rear end cap (Voids Factory Warranties) is required.
- These new systems fit all generations of Bravo outdrives including the new "Slope Back" style.
- it is recommended to use external power steering on boats which run in excess of 70 MPH.
- There are some boats that run 60 MPH that would benefit from the use of external power steering.
- Your choice of 4", 6" or 8" fixed steering posts, or upgrade to tilt steering post in standard 5-1/2", 7-1/2"and 9-1/2" lengths!
- 80 ft. of hydraulic hose is included. See related parts if you need additional hose.
This kit includes:
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Mayfair's Full Hydraulic Steering Kit for Single Bravo with Single 7" Stroke Ram for Narrow Mounts (9" from Gimbal Housing) featuring the 316L Stainless Steel Modular Wing Plate that requires no modification to your outdrive.
- 316L Stainless Steel modular wing plate steering mount.
- Ram Mounting Location is 9" from the side of the Gimbal Housing allows for system to fit in applications where space is at a premium.
- The wing plate steering mount design incorporates dual side links and a single rear load cap that bolt together.
- The rear load cap captures the outdrives rear end cap while the side links attach to the outdrives four mounting points at the Gimbal housing.
- This arrangement gives additional support for even tighter, firmer steering control.
- No dis-assembly of your outdrives rear end cap (Voids Factory Warranties) is required.
- These new systems fit all generations of Bravo outdrives including the new "Slope Back" style.
- it is recommended to use external power steering on boats which run in excess of 70 MPH.
- There are some boats that run 60 MPH that would benefit from the use of external power steering.
- Your choice of 4", 6" or 8" fixed steering posts, or upgrade to tilt steering post in standard 5-1/2", 7-1/2"and 9-1/2" lengths!
- 80 ft. of hydraulic hose is included. See related parts if you need additional hose.
This kit includes:
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Mayfair's Full Hydraulic Steering Kit for Single Bravo with Single 9" Stroke Ram (17-3/4" from Gimbal Housing) featuring the 316L Stainless Steel Modular Wing Plate that requires no modification to your outdrive.
- 316L Stainless Steel modular wing plate steering mount.
- Ram Mounting Location is 17-3/4" from the side of the Gimbal Housing allows for system to fit in applications where space is at a premium.
- The wing plate steering mount design incorporates dual side links and a single rear load cap that bolt together.
- The rear load cap captures the outdrives rear end cap while the side links attach to the outdrives four mounting points at the Gimbal housing.
- This arrangement gives additional support for even tighter, firmer steering control.
- No dis-assembly of your outdrives rear end cap (Voids Factory Warranties) is required.
- These new systems fit all generations of Bravo outdrives including the new "Slope Back" style.
- it is recommended to use external power steering on boats which run in excess of 70 MPH.
- There are some boats that run 60 MPH that would benefit from the use of external power steering.
- Your choice of 4", 6" or 8" fixed steering posts, or upgrade to tilt steering post in standard 5-1/2", 7-1/2"and 9-1/2" lengths!
- 80 ft. of hydraulic hose is included. See related parts if you need additional hose.
This kit includes:
|
|
|
|
|
137-8440 New Mayfair interface kit for Mercury Trim Tabs. This allows you to
connect to a NMEA output to show digital K-Plane trim on multi-function
screens and on the the Mayfair LED Indicators Panel at the same time.
Replace Mercury Interface Kit Parts #8M0100069 and #895820T02. This is for boats that already have NMEA in the boat, if you don't have NMEA you need a #137-8616 display interface (see related parts).
Kit Includes:
- 137-8435 LED - ADAPTER BOX
- 137-8708-3 3FT - HARNESS 3 PIN M/B
- 137-8708-88FT - HARNESS 3 PIN M/B
- 516-2700-06-011 - 6 METER DROP CABLE
- 516-2703-11-002 - 2 METER POWER CABLE
- 516-2702-13-013 - 2 WAY T, NMEA 2000
- 516-2705-00-010 - FEMALE TERMINATOR NMEA
- 516-2705-00-001 - MALE TERMINATOR NMEA
|
|
137-9521
- For Mercury Outboards with Existing Wingplate
- Replacement Ram Assembly
- 9" Stroke Ram
- (2) 16" SS Hoses, (2) Thru Hull Fittings, (2) Ram Fitting Included.
|
|
137-9001 Mayfair Power Steering Reservoir - Tank Only
This Mayfair by Hardin Marine power steering reservoir is superbly crafted with internal baffling to eliminate foaming while reducing fluid temperature. It includes a vented leak-proof cap and is just one of the many Hardin Marine exclusives. Reservoir holds 36 oz. of fluid. No lines or fittings included.
|
|
137-9411 Mayfair Single Bravo/Dual Ram Add-On Hydraulic Steering Kit
(Ram Mounting Location is 17-3/4" from the side of the Gimbal Housing)
Mayfair's "NEW" Modular Wing Plate Add-On Hydraulic Steering Systems
Mayfair by Hardin Marines Innovation has once again brought to the performance power boat and recreational sport boat industry a steering revelation with its all new modular wing plate steering systems. By using 21st century manufacturing techniques Mayfair by Hardin Marine has developed a superior 316L Stainless modular wing plate steering mount. This wing plate steering mount design incorporates dual side links and a single rear load cap that bolt together forming a strong bridge like cradle that provides the ability to mount the wing plate to the boats key attachment points. The rear load cap captures the outdrives rear end cap while the side links attach to the outdrives four mounting points at the Gimbal housing. This arrangement gives additional support for even tighter, firmer steering control. Best of all there is no disassembly of your outdrives rear end cap (Voids Factory Warranties) and these new systems fit all generations of Bravo outdrives including the new "Slope Back" style. Generally speaking, it is recommended to use external power steering on boats which run in excess of 70 MPH, however there are some boats that run 60 MPH that would benefit from the use of external power steering.
The Mayfair Add-On Hydraulic Steering System includes:
As you will see in the following pages there has never been more option, more choices, and more ways to save than ever before on the purchase of a new hydraulic steering system. We are constantly asked which system is "best" and "why"? Well, all of the systems listed here are of the very best in quality. What separates them in many cases is very minor features such as fitment options or how complete the kit is. Some manufactures provide the bare minimum and save through the use of possibly rubber lines, aluminum components instead of stainless steel, etc. At the end of the day what makes a great steering system is "Value" all of these systems will meet your needs some will just leave a big chunk of your money ($$$$) still in your wallet. Compare and save "NO ONE" can save you more money on your new steering system than we can, try us the answers are crystal clear.
Note: It is required to use either the Brazilian steering manifold (135-1040) or Saginaw shuttle valve fittings (135-1070) which are sold separately.
|
|
137-9414 Mayfair Single Bravo/Dual Ram Add-On Hydraulic Steering Kit
(Ram Mounting Location is 9" from the side of the Gimbal Housing)
Mayfair's "NEW" Modular Wing Plate Add-On Hydraulic Steering Systems
Mayfair by Hardin Marines Innovation has once again brought to the performance power boat and recreational sport boat industry a steering revelation with its all new modular wing plate steering systems. By using 21st century manufacturing techniques Mayfair by Hardin Marine has developed a superior 316L Stainless modular wing plate steering mount. This wing plate steering mount design incorporates dual side links and a single rear load cap that bolt together forming a strong bridge like cradle that provides the ability to mount the wing plate to the boats key attachment points. The rear load cap captures the outdrives rear end cap while the side links attach to the outdrives four mounting points at the Gimbal housing. This arrangement gives additional support for even tighter, firmer steering control. Best of all there is no disassembly of your outdrives rear end cap (Voids Factory Warranties) and these new systems fit all generations of Bravo outdrives including the new "Slope Back" style. Generally speaking, it is recommended to use external power steering on boats which run in excess of 70 MPH, however there are some boats that run 60 MPH that would benefit from the use of external power steering.
The Mayfair Full Hydraulic Steering System includes:
As you will see in the following pages there has never been more option, more choices, and more ways to save than ever before on the purchase of a new hydraulic steering system. We are constantly asked which system is "best" and "why"? Well, all of the systems listed here are of the very best in quality. What separates them in many cases is very minor features such as fitment options or how complete the kit is. Some manufactures provide the bare minimum and save through the use of possibly rubber lines, aluminum components instead of stainless steel, etc. At the end of the day what makes a great steering system is "Value" all of these systems will meet your needs some will just leave a big chunk of your money ($$$$) still in your wallet. Compare and save "NO ONE" can save you more money on your new steering system than we can, try us the answers are crystal clear.
Note: It is required to use either the Brazilian steering manifold (135-1040) or Saginaw shuttle valve fittings (135-1070) which are sold separately.
|
|
137-9413 Mayfair Single Bravo/Single Ram Add-On Hydraulic Steering Kit
(Ram Mounting Location is 9" from the side of the Gimbal Housing)
Mayfair's "NEW" Modular Wing Plate Add-On Hydraulic Steering Systems
Mayfair by Hardin Marines Innovation has once again brought to the performance power boat and recreational sport boat industry a steering revelation with its all new modular wing plate steering systems. By using 21st century manufacturing techniques Mayfair by Hardin Marine has developed a superior 316L Stainless modular wing plate steering mount. This wing plate steering mount design incorporates dual side links and a single rear load cap that bolt together forming a strong bridge like cradle that provides the ability to mount the wing plate to the boats key attachment points. The rear load cap captures the outdrives rear end cap while the side links attach to the outdrives four mounting points at the Gimbal housing. This arrangement gives additional support for even tighter, firmer steering control. Best of all there is no disassembly of your outdrives rear end cap (Voids Factory Warranties) and these new systems fit all generations of Bravo outdrives including the new "Slope Back" style. Generally speaking, it is recommended to use external power steering on boats which run in excess of 70 MPH, however there are some boats that run 60 MPH that would benefit from the use of external power steering.
The Mayfair Add-On Hydraulic Steering System includes:
As you will see in the following pages there has never been more option, more choices, and more ways to save than ever before on the purchase of a new hydraulic steering system. We are constantly asked which system is "best" and "why"? Well, all of the systems listed here are of the very best in quality. What separates them in many cases is very minor features such as fitment options or how complete the kit is. Some manufactures provide the bare minimum and save through the use of possibly rubber lines, aluminum components instead of stainless steel, etc. At the end of the day what makes a great steering system is "Value" all of these systems will meet your needs some will just leave a big chunk of your money ($$$$) still in your wallet. Compare and save "NO ONE" can save you more money on your new steering system than we can, try us the answers are crystal clear.
Note: It is required to use either the Brazilian steering manifold (135-1040) or Saginaw shuttle valve fittings (135-1070) which are sold separately.
|
|
137-9410 Mayfair Single Bravo/Single Ram Add-On Hydraulic Steering Kit
(Ram Mounting Location is 17-3/4" from the side of the Gimbal Housing)
Mayfair's "NEW" Modular Wing Plate Add-On Hydraulic Steering Systems
Mayfair by Hardin Marines Innovation has once again brought to the performance powerboat and recreational sport boat industry a steering revelation with its all new modular wing plate steering systems. By using 21st century manufacturing techniques Mayfair by Hardin Marine has developed a superior 316L Stainless modular wing plate steering mount. This wing plate steering mount design incorporates dual side links and a single rear load cap that bolt together forming a strong bridge like cradle that provides the ability to mount the wing plate to the boats key attachment points. The rear load cap captures the outdrives rear end cap while the side links attach to the outdrives four mounting points at the Gimbal housing. This arrangement gives additional support for even tighter, firmer steering control. Best of all there is no disassembly of your outdrives rear end cap (Voids Factory Warranties) and these new systems fit all generations of Bravo outdrives including the new "Slope Back" style. Generally speaking, it is recommended to use external power steering on boats which run in excess of 70 MPH, however there are some boats that run 60 MPH that would benefit from the use of external power steering.
The Mayfair Add-On Hydraulic Steering System includes:
As you will see in the following pages there has never been more option, more choices, and more ways to save than ever before on the purchase of a new hydraulic steering system. We are constantly asked which system is "best" and"why"? Well, all of the systems listed here are of the very best in quality. What separates them in many cases is very minor features such as fitment options or how complete the kit is. Some manufactures provide the bare minimum and save through the use of possibly rubber lines, aluminum components instead of stainless steel, etc. At the end of the day what makes a great steering system is "Value" all of these systems will meet your needs some will just leave a big chunk of your money ($$$$) still in your wallet. Compare and save "NO ONE" can save you more money on your new steering system than we can, try us the answers are crystal clear.
Note: It is required to use either the Brazilian steering manifold (135-1040) or Saginaw shuttle valve fittings (135-1070) which are sold separately.
|
|
137-9234
- 9" Stroke Hydraulic Replacement Steering Ram
- Requires two 137-9227 bushings, sold separately, see related parts.
- 1/4" NPT female fittings.
- Measures 17.17" closed from center eyelet to end of threads.
- See Product Specs for detailed measurements.
|
|
137-9268
- 7" Stroke Hydraulic Replacement Steering Ram Assembly
- 5/8" Rod End Wingplate Mount
- Space Saver Ram for tight spaces
- Includes SS Hoses, Thru Hull Fittings, Mounting Brackets and Hardware.
- 1/4" NPT female fittings.
- Set up for use on Mayfair Wingplates.
- See Product Specs for detailed measurements.
Click here to see part drawing and breakdown
|
|
137-9259
- 9" Stroke Hydraulic Replacement Steering Ram Assembly
- Clevis Wingplate Mount
- Includes SS Hoses, Thru Hull Fittings, Mounting Brackets and Hardware.
- 1/4" NPT female fittings.
- Set up for use on Mayfair Wingplates.
- See Product Specs for detailed measurements.
Click here to see part drawing and breakdown
|
|
137-9227 Two of these bushings are required with the purchase of any individual Mayfair steering ram. Sold each.
|
|
137-9497
- 7" Stroke Hydraulic Replacement Steering Ram Head
- See Product Specs for detailed measurements.
|
|
137-9494
- 9" Stroke Hydraulic Replacement Steering Ram Head
- See Product Specs for detailed measurements.
|
|
137-9499
- 7" Stroke Hydraulic Replacement Steering Ram Rod
- Fits Hardin Marine Hydraulic Rams
|
|
137-9496
- 9" Stroke Hydraulic Replacement Steering Ram Rod
- Fits Hardin Marine Hydraulic Rams
|
|
137-9487
- 8" Stroke Hydraulic Replacement Steering Ram Rod
- Fits Marine Machine Hydraulic Rams
|
|
137-8245 Replacement for Mayfair Trim Tabs
|
|
|
|
|
