Hardin Marine

• LED Lighted Indicator System by Mayfair for Use with Dual Mercury #6 Outdrives with Mayfair or Mercury Gen1 Trim Tabs
• Mayfair and Mercury Gen1 trim tabs have 1/2" outer diameter trim ram mounting shafts.
• Lights Run through Red, Green and Blue from Top to Bottom.
• NEW Gen III Indicators use NMEA 2000 cables for easy installation.
• Gen III panels feature 2X the LED's - 76 per board.
• Available with Carbon Fiber faces in Black, Silver, Blue and Red
• Polished Stainless Steel or Powder-Coated Billet Aluminum Rims.
• Easy to Install and Simple Wiring. No Cables Required.
• Includes Wiring Harnesses
• Length: 5"
• Width: 5"
• Complete Kit - Includes Panel, Harness, and Electronic Sensor Actuators.

• LED Lighted Indicator System by Mayfair for use with Dual Mercury #6 Outdrives with Mercury Gen2 Trim Tabs
• Mercury Gen2 trim tabs have 5/8" outer diameter trim ram mounting shafts.
• Lights Run through Red, Green and Blue from Top to Bottom.
• NEW Gen III Indicators use NMEA 2000 cables for easy installation.
• Gen III panels feature 2X the LED's - 76 per board.
• Available with Carbon Fiber faces in Black, Silver, Blue and Red 
• Polished Stainless Steel or Powder-Coated Billet Aluminum Rims.
• Easy to Install and Simple Wiring. No Cables Required.
• Includes Wiring Harnesses
• Length: 5"
• Width: 5"
• Complete Kit - Includes Panel, Harness, and Electronic Sensor Actuators.

• LED Lighted Indicator System by Mayfair for Use with Dual Mercury #6 Outdrives with Mercury Trim Tabs with a 3 wire electric sender
• Lights Run through Red, Green and Blue from Top to Bottom.
• NEW Gen III Indicators use NMEA 2000 cables for easy installation.
• Gen III panels feature 2X the LED's - 76 per board.
• Available with Carbon Fiber faces in Black, Silver, Blue and Red
• Polished Stainless Steel or Powder-Coated Billet Aluminum Rims.
• Easy to Install and Simple Wiring. No Cables Required.
• Length: 5"
• Width: 5"
• Complete Kit - Includes Panel, Harness, and Electronic Sensor Actuators.

• LED Lighted Indicator System by Mayfair for Use with Dual Mercury Bravo Drives.
• Lights Run through Red, Green and Blue from Top to Bottom.
• NEW Gen III Indicators use NMEA 2000 cables for easy installation.
• Gen III panels feature 2X the LED's - 76 per board.
• Available with Carbon Fiber faces in Black, Silver, Blue, Red
• Polished Stainless Steel or Powder-Coated Billet Aluminum Rims.
• Easy to Install and Simple Wiring. No Cables Required.
• 5" Length x 2-1/2" Width Panel
• Complete Kit - Includes Panel, Harness, and Electronic Sensor Actuators.

• LED Lighted Indicator System by Mayfair for Use with Dual Mercury Bravo Drive with Mayfair or Mercury Gen1 Trim Tabs.
• Mayfair and Mercury Gen1 trim tabs have 1/2" outer diameter trim ram mounting shafts.
• Lights Run through Red, Green and Blue from Top to Bottom.
• NEW Gen III Indicators use NMEA 2000 cables for easy installation.
• Gen III panels feature 2X the LED's - 76 per board.
• Available with Carbon Fiber faces in Black, Silver, Blue and Red
• Polished Stainless Steel or Powder-Coated Billet Aluminum Rims.
• Easy to Install and Simple Wiring. No Cables Required.
• Includes Wiring Harnesses
• Length: 5"
• Width: 5"
• Complete Kit - Includes Panel, Harness, and Electronic Sensor Actuators.

• LED Lighted Indicator System by Mayfair for use with Dual Mercury Bravo Drive with Mercury Gen2 Trim Tabs.
• Mercury Gen2 trim tabs have 5/8" outer diameter trim ram mounting shafts.
• Lights Run through Red, Green and Blue from Top to Bottom.
• NEW Gen III Indicators use NMEA 2000 cables for easy installation.
• Gen III panels feature 2X the LED's - 76 per board.
• Available with Carbon Fiber faces in Black, Silver, Blue and Red
• Polished Stainless Steel or Powder-Coated Billet Aluminum Rims.
• Easy to Install and Simple Wiring. No Cables Required.
• Includes: (4) Wiring Harnesses
• Length: 5"
• Width: 5"
• Complete Kit - Includes Panel, Harness, and Electronic Sensor Actuators.

• LED Lighted Indicator System by Mayfair for use with Dual Mercury Bravo Drive with Mercury Trim Tabs with a 3 wire electric sender
• Lights Run through Red, Green and Blue from Top to Bottom.
• NEW Gen III Indicators use NMEA 2000 cables for easy installation.
• Gen III panels feature 2X the LED's - 76 per board.
• Available with Carbon Fiber faces in Black, Silver, Blue, Red
• Polished Stainless Steel or Powder-Coated Billet Aluminum Rims.
• Easy to Install and Simple Wiring. No Cables Required.
• Length: 5"
• Width: 5"
• Complete Kit - Includes Panel, Harness, and Electronic Sensor Actuators.

• LED Lighted Indicator System by Mayfair for Use with Dual Mercury Speedmaster / TRS / Alpha Drives.
• Lights Run through Red, Green and Blue from Top to Bottom.
• NEW Gen III Indicators use NMEA 2000 cables for easy installation.
• Gen III panels feature 2X the LED's - 76 per board.
• Available with Carbon Fiber faces in Black, Silver, Blue, Red
• Polished Stainless Steel or Powder-Coated Billet Aluminum Rims.
• Easy to Install and Simple Wiring. No Cables Required.
• 5" Length x 2-1/2" Width Panel
• Complete Kit - Includes Panel, Harness, and Electronic Sensor Actuators.

• LED Lighted Indicator System by Mayfair for Use with Dual Mercury Speedmaster / TRS / Alpha Drive with Mayfair or Mercury Gen1 Trim Tabs.
• Mayfair and Mercury Gen1 trim tabs have 1/2" outer diameter trim ram mounting shafts.
•  Lights Run through Red, Green and Blue from Top to Bottom.
• NEW Gen III Indicators use NMEA 2000 cables for easy installation.
• Gen III panels feature 2X the LED's - 76 per board.
• Available with Carbon Fiber faces in Black, Silver, Blue and Red
• Polished Stainless Steel or Powder-Coated Billet Aluminum Rims.
• Easy to Install and Simple Wiring. No Cables Required.
• Includes Wiring Harnesses
• Length: 5"
• Width: 5"
• Complete Kit - Includes Panel, Harness, and Electronic Sensor Actuators.

• LED Lighted Indicator System by Mayfair for use with Dual Mercury Speedmaster / TRS / Alpha Drive with Mercury Gen2 Trim Tabs.
• Mercury Gen2 trim tabs have 5/8" outer diameter trim ram mounting shafts.
• Lights Run through Red, Green and Blue from Top to Bottom.
• NEW Gen III Indicators use NMEA 2000 cables for easy installation.
• Gen III panels feature 2X the LED's - 76 per board.
• Available with Carbon Fiber faces in Black, Silver, Blue and Red
• Polished Stainless Steel or Powder-Coated Billet Aluminum Rims.
• Easy to Install and Simple Wiring. No Cables Required.
• Includes Wiring Harnesses
• Length: 5"
• Width: 5"
• Complete Kit - Includes Panel, Harness, and Electronic Sensor Actuators.

• LED Lighted Indicator System by Mayfair for use with Dual Mercury Speedmaster / TRS / Alpha Drive with Mercury Trim Tabs with a 3 wire electric sender
• Lights Run through Red, Green and Blue from Top to Bottom.
• NEW Gen III Indicators use NMEA 2000 cables for easy installation.
• Gen III panels feature 2X the LED's - 76 per board.
• Available with Carbon Fiber faces in Black, Silver, Blue, Red
• Polished Stainless Steel or Powder-Coated Billet Aluminum Rims.
• Easy to Install and Simple Wiring. No Cables Required.
• Length: 5"
• Width: 5"
• Complete Kit - Includes Panel, Harness, and Electronic Sensor Actuators.

• LED Lighted Indicator System by Mayfair for Use with Mayfair Gen 3 Trim Tabs with a 3 wire electric sender
• Lights Run through Red, Green and Blue from Top to Bottom.
• NEW Gen III Indicators use NMEA 2000 cables for easy installation.
• Gen III panels feature 2X the LED's - 76 per board.
• Available with Carbon Fiber faces in Black, Silver, Blue and Red
• Polished Stainless Steel or Powder-Coated Billet Aluminum Rims.
• Easy to Install and Simple Wiring, No Cables Required!
• Length 5" x Width 2-1/2" Panel
• Complete Kit - Includes Panel, Harness, and Electronic Sensor Actuators.

• LED Lighted Indicator System by Mayfair for Use with Mayfair and Mercury Gen1 Trim Tabs with 1/2 dia. trim shafts.
• NOTE: Mayfair and Mercury Gen1 trim tabs have 1/2 outer diameter trim ram mounting shafts.
• NEW Gen III Indicators use NMEA 2000 cables for easy installation.
• Gen III panels feature 2X the LED's - 76 per board.
• Lights Run through Red, Green and Blue from Top to Bottom.
• Available with Carbon Fiber faces in Black, Silver, Blue and Red
• Polished Stainless Steel or Powder-Coated Billet Aluminum Rims.
• Easy to Install and Simple Wiring, No Cables Required!
• Length 5"
• Panel Width 2-1/2"
• Complete Kit - Includes Panel, Harness, and Electronic Sensor Actuators.

• LED Lighted Indicator System by Mayfair for Mayfair and Mercury Gen2 Trim Tabs, with 5/8" diameter trim ram mounting shafts
• Mercury Gen2 trim tabs have 5/8" outer diameter trim ram mounting shafts.
• NEW Gen III Indicators use NMEA 2000 cables for easy installation.
• Gen III panels feature 2X the LED's - 76 per board.
• Lights Run through Red, Green and Blue from Top to Bottom.
• Available with Carbon Fiber faces in Black, Silver, Blue, Red
• Polished Stainless Steel or Powder-Coated Billet Aluminum Rims.
• Easy to Install and Simple Wiring, No Cables Required!
• Includes Wiring Harnesses
• Length 5" x Width 2-1/2" Panel
• Complete Kit - Includes Panel, Harness, and Electronic Sensor Actuators.

• LED Lighted Indicator System by Mayfair for Use with Single Imco SCX Drive with Mayfair or Mercury Gen1 Trim Tabs.
• Mayfair and Mercury Gen1 trim tabs have 1/2 outer diameter trim ram mounting shafts.
• Single Drive Setup Lights Up Both Sides Evenly for Single Drive Display.
• NEW Gen III Indicators use NMEA 2000 cables for easy installation.
• Gen III panels feature 2X the LED's - 76 per board.
• Lights Run through Red, Green and Blue from Top to Bottom.
• Available with Carbon Fiber faces in Black, Silver, Blue and Red
• Polished Stainless Steel or Powder-Coated Billet Aluminum Rims.
• Easy to Install and Simple Wiring. No Cables Required.
• Includes Wiring Harnesses
• Length: 5"
• Width: 5"
• Complete Kit - Includes Panel, Harness, and Electronic Sensor Actuators.

• LED Lighted Indicator System by Mayfair for Use with Single Imco SCX Drive with Mercury Gen2 Trim Tabs.
• Mercury Gen2 trim tabs have 5/8" outer diameter trim ram mounting shafts.
•  Single Drive Setup Lights Up Both Sides Evenly for Single Drive Display.
• NEW Gen III Indicators use NMEA 2000 cables for easy installation.
• Gen III panels feature 2X the LED's - 76 per board.
• Lights Run through Red, Green and Blue from Top to Bottom.
• Available with Carbon Fiber faces in Black, Silver, Blue, Red
• Polished Stainless Steel or Powder-Coated Billet Aluminum Rims.
• Easy to Install and Simple Wiring. No Cables Required.
• Includes Wiring Harnesses
• Length: 5"
• Width: 5"
• Complete Kit - Includes Panel, Harness, and Electronic Sensor Actuators.

• LED Lighted Indicator System for Use with Single #6 Drive.
• Single Drive Setup Lights Up Both Sides Evenly for Single Drive Display.
• NEW Gen III Indicators use NMEA 2000 cables for easy installation.
• Gen III panels feature 2X the LED's - 76 per board.
• Lights Run through Red, Green and Blue from Top to Bottom.
• Available with Carbon Fiber faces in Black, Silver, Blue and Red
• Polished Stainless Steel or Powder-Coated Billet Aluminum Rims.
• Easy to Install and Simple Wiring, No Cables Required/
• Includes Wiring Harnesses
• 5" Length x 2-1/2" Width Panel
• Complete Kit - Includes Panel, Harness, and Electronic Sensor Actuators.

• LED Lighted Indicator System by Mayfair for Use with Single Mercury Bravo Drive with Mayfair or Mercury Gen1 Trim Tabs.
• Mayfair and Mercury Gen1 trim tabs have 1/2 outer diameter trim ram mounting shafts.
• Single Drive Setup Lights Up Both Sides Evenly for Single Drive Display.
• NEW Gen III Indicators use NMEA 2000 cables for easy installation.
• Gen III panels feature 2X the LED's - 76 per board.
• Lights Run through Red, Green and Blue from Top to Bottom.
• Available with Carbon Fiber faces in Black, Silver, Blue and Red
• Polished Stainless Steel or Powder-Coated Billet Aluminum Rims.
• Easy to Install and Simple Wiring. No Cables Required.
• Includes Wiring Harnesses
• Length: 5"
• Width: 5"
• Complete Kit - Includes Panel, Harness, and Electronic Sensor Actuators.

• LED Lighted Indicator System by Mayfair for Use with Single Mercury Bravo Drive with Mercury Gen2 Trim Tabs.
• Mercury Gen2 trim tabs have 5/8" outer diameter trim ram mounting shafts.
•  Single Drive Setup Lights Up Both Sides Evenly for Single Drive Display.
• NEW Gen III Indicators use NMEA 2000 cables for easy installation.
• Gen III panels feature 2X the LED's - 76 per board.
• Lights Run through Red, Green and Blue from Top to Bottom.
• Available with Carbon Fiber faces in Black, Silver, Blue, Red
• Polished Stainless Steel or Powder-Coated Billet Aluminum Rims.
• Easy to Install and Simple Wiring. No Cables Required.
• Includes Wiring Harnesses
• Length: 5"
• Width: 5"
• Complete Kit - Includes Panel, Harness, and Electronic Sensor Actuators.

• LED Lighted Indicator System by Mayfair for Use with Single Mercury Speedmaster / TRS / Alpha Drive with Mayfair or Mercury Gen1 Trim Tabs.
• Mayfair and Mercury Gen1 trim tabs have 1/2 outer diameter trim ram mounting shafts.
• Single Drive Setup Lights Up Both Sides Evenly for Single Drive Display.
• NEW Gen III Indicators use NMEA 2000 cables for easy installation.
• Gen III panels feature 2X the LED's - 76 per board.
• Lights Run through Red, Green and Blue from Top to Bottom.
• Available with Carbon Fiber faces in Black, Silver, Blue and Red
• Polished Stainless Steel or Powder-Coated Billet Aluminum Rims.
• Easy to Install and Simple Wiring. No Cables Required.
• Includes: (3) Wiring Harnesses
• Length: 5"
• Width: 5"
• Complete Kit - Includes Panel, Harness, and Electronic Sensor Actuators.

• LED Lighted Indicator System by Mayfair for Use with Single Mercury Speedmaster / TRS / Alpha Drive with Mercury Gen2 Trim Tabs.
• Mercury Gen2 trim tabs have 5/8" outer diameter trim ram mounting shafts.
•  Single Drive Setup Lights Up Both Sides Evenly for Single Drive Display.
• NEW Gen III Indicators use NMEA 2000 cables for easy installation.
• Gen III panels feature 2X the LED's - 76 per board.
• Lights Run through Red, Green and Blue from Top to Bottom.
• Available with Carbon Fiber faces in Black, Silver, Blue, Red
• Polished Stainless Steel or Powder-Coated Billet Aluminum Rims.
• Easy to Install and Simple Wiring. No Cables Required.
• Includes: (3) Wiring Harnesses
• Length: 5"
• Width: 5"
• Complete Kit - Includes Panel, Harness, and Electronic Sensor Actuators.

• Lights Run through Red, Green and Blue from Top to Bottom.
• Available with Carbon Fiber faces in Black, Silver, Blue, Red
• Polished or Powder-Coated Stainless Steel Rim.
• Easy to Install and Simple Wiring, No Cables Required
• 5" Length x 2-1/2" Width Panel
• PANEL ONLY! 

• Lights Run through Red, Green and Blue from Top to Bottom.
• Available with Carbon Fiber faces in Black, Silver, Blue, Red
• Polished or Powder-Coated Stainless Steel Rim.
• Easy to Install and Simple Wiring, No Cables Required
• 5" Length x 2-1/2" Width Panel
• PANEL ONLY! 

• Lights Run through Red, Green and Blue from Top to Bottom.
• Available with Carbon Fiber faces in Black, Silver, Blue, Red
• Polished or Powder-Coated Stainless Steel Rim.
• NEW Gen III Indicators use NMEA 2000 cables for easy installation.
• Gen III panels feature 2X the LED's - 76 per board.
• Easy to Install and Simple Wiring, No Cables Required
• 5" Length x 5" Width Panel
• PANEL ONLY! 

• Lights Run through Red, Green and Blue from Top to Bottom.
• Available with Carbon Fiber faces in Black, Silver, Blue, Red
• Polished or Powder-Coated Stainless Steel Rim.
• Easy to Install and Simple Wiring, No Cables Required
• 7" Length x 5" Width Panel
• PANEL ONLY! 

Lid Only for Hardin 1/2" Hole Clamp Type Offshore Sea Strainer

This is a 1/2" hole replacement Sea Strainer Lid. This clear-view lid allows unrestricted visual inspection. Designed to fit Hardin Offshore Generation 2 Sea Strainers only.

High Performance Sea Strainer Lid, Lid Only

This is a replacement Sea Strainer Lid. This clear-view lid allows unrestricted visual inspection. 6.5" diameter. Fits Hardin Swirl Away Sea Strainers.