Hardin Marine

Floor Mounted Trim Control

The newest safety item in high performance boat accessories. Mounts in floor of the boat allowing the operator to trim engine or outdrives with their foot.

Ford 429/460 Throttle Bracket

Here's the original equipment style throttle bracket that has been used by boat manufacturers for years. These brackets are gold cadmium plated to resist corrosion. These brackets are designed for original equipment intake manifold. Some aftermarket intake manifolds might require slight modification.

Ford 429/460 Xtreme Marine Seal™ Valve Cover Gasket- Sold in Pairs

There is nothing more frustrating than a leaking valve cover seal, so don't settle for anything less than the best. That's why professional engine builders nationwide demand Xtreme Marine Seal valve cover gaskets. Produced from a blend of polymer and cork to provide a gasket that will last.

Sold in Pairs

Ford 429-460 10 Quart Stern Drive / Jet Drive Performance Oil Pan

Marine oil pans are subject to special conditions. Closed engine compartments create a lack of air flowing around the oil pan causing higher oil temperatures, which can destroy the lubricating properties of the oil in low capacity pans. The motion of the boat in the water sloshes the oil in pans that don't have correct baffling. Air is ingested through the oil pick-up resulting in momentary loss of oil pressure. The oil is tossed into the crank, which foams and aerates it. The pounding effect of oil in the pan cause fractures in pans without reinforcement. 

The design and construction of these oil pans insures there are no problems, even in the roughest conditions. Here are just a few of the oil pan features:

• 8 qt Pan Capacity
• 14 ga. Steel Construction
• Double Trap Door Baffles
• Removable Windage/Anti-Slosh Baffle
• 1/2" NPT Drain Fitting
• Provision For our Pan Mounted Dipstick
• Powder Coating & Brass Plugs For Corrosion Protection
• The included oil pump pick up was designed for use with a mellings oil pump PART # M-84DHV or similar.
  Example: 570-224-41144V

These oil pans offer a value unsurpassed in the marine industry today.

WARNING
Don't be fooled by twenty year old technology that requires you to replace engine main fasteners to install your windage tray. These pans use state of the art pan mounted windage tray systems offering you the future in oil control.

460 Ford Thermostat Housing/Water Outlet Gasket

4-Cylinder Power Assist Helm Unit

 HELM CONTROL SPECIFICATIONS

• FLOW RATE 2 TO 8 GPM
  
• MAX PRESSURE 2500 PSI
  
• OPEN CENTER NON LOAD REACTION
• 3/4" O-RING PORTS

4.2 turns lock to lock with dual #6.

Four Lever Xtreme Throttle/Shifter Control Customizer

The World's Finest Controls Are Now Stronger, Smoother And Have More Features Than Any Other Control Available

Hardin Marine offers the serious boater unsurpassed quality, performance and service.  The newly designed Hardin Marine Xtreme controls start with a main body quadrant CNC machined from lightweight durable aircraft billet aluminum.  while the handles are made of nothing short of nearly indestructible all billet stainless steel.  these controls feature larger smooth ergonomically designed throttle and shift knobs.  The throttle knobs allow for an industry exclusive 4 trim button option to ensure comfortable manageability boat control.  The Hardin controls offer an extremely narrow mounting footprint to allow easy mounting in the tightest of quarters but it does not stop there.  With the ability to change cable entry locations from front, rear, and even bottom entry these controls give you unlimited options.  If you can't decide between a detent (click) style operation or smooth, no problem, these controls offer both with a simple adjustment from the top side, there's no need to remove the controls to make the adjustment.  If your the type of customer that prefers "Great" over "Good" or "Exceptional" over "Acceptable" then we're confident you will own Hardin Marine Controls.

Shifter Features:

• Adjustable from DETENT (click) style or SMOOTH (friction) style...Outstanding for all applications
• Detent and friction can be adjusted without removing the unit
• Three different cable entry options front, rear, or bottom allow for precise mounting and setting of throttles
• Unique swivel style cable clamps accept standard 30 series cables
• Optional 0, 2, 4, 6 or 8 aircraft waterproof billet aluminum trim button options
• Available in a standard polished finish or optional UV protected powder coated colors
• No exposed mounting hardware

These NEW heavy-duty, durable, billet aluminum/stainless steel throttles are built for the race or pleasure boater.  Now with two or four trim buttons mounted in the throttle handle.  One set of buttons for trimming both drives or both tabs, single or dual configurations can be used to activate drives, tabs, nitrous, etc.  billet aircraft button style switches are waterproof with the wires running internally through the handle and brackets leaving no exposed wiring.

Available in Polished, Blue, Red, Black, Flat Black, Purple, Orange, White, Yellow and Lime Green. Contact us for custom color options. NOTE: These are built to order and take 4-5 business days to ship

Bravo Shift Cable Adjustment Guidance

Mayfair Electronics by Hardin Marine and Marine Design Corp have teamed up to bring the new generation of the Heads-Up indicator system to the marine industry. This new heads up indicator system does away with cables and converts digital electronic signals to operate actuators on the display. Carbon Fiber cover plates with powdercoated bezels in multiple colors. Indicators come standard with black sticks with engraved white writing. Optional LED lit clear lexan sticks with black writing are an available options.

Mayfair electronics by Hardin Marine brings the newest generation of the Heads-Up indicator system to the marine industry. Featuring Carbon Fiber cover plates with powdercoated bezels in multiple colors. Indicators come standard with black sticks with engraved white writing. The mechanical version uses the common 33c cable to operate the sticks for simple reliable operation.

Replacement Front Bearing Housing O-Ring for Hardin Marine Multi Stage Sea Pumps

Front inlet only w/ Spacer

Fuel Line And Regulator Kit - Dominator Fuel Lines Only

-6 Size

Here's an all NEW line and regulator kit that solves the age old problem of how to mount the regulator close to the carburetor. Precision bent stainless fuel line with all the necessary connection fittings make this the ultimate single carbureted fuel delivery system. Designed to work with the 715-13201 Aeromotive Regulator, see related parts.

Fuel Line And Regulator Kit For 4150 Style Holley

Here's an all NEW line and regulator kit that solves the age old problem ofhow to mount the regulator close to the carburetor. Precision bentstainless fuel line with all the necessary connection fittings make this theultimate single carbureted fuel delivery system. Regulator has -6 ORB fitting.

Fuel Line And Regulator Kit For 4500 Dominator

Here's an all NEW line and regulator kit that solves the age old problem ofhow to mount the regulator close to the carburetor. Precision bentstainless fuel line with all the necessary connection fittings make this theultimate single carbureted fuel delivery system.

Fuel Line And Regulator Kit For Mechanical Secondary Demon Carburetors

Here's an all NEW line and regulator kit that solves the age old problem ofhow to mount the regulator close to the carburetor. Precision bentstainless fuel line with all the necessary connection fittings make this theultimate single carbureted fuel delivery system. Regulator has -6 ORB fitting

Fuel Line Return To Tank Adapter - 1-1/2" O.D With 3/8" NPT Female Pipe Connection

These stainless steel fuel return adapters are perfect for an EFI conversion or any high output return style fuel system. These allow you to simply remove a small section of your 1-1/2" fuel fill hose and clamp the adapter in place - no welding required. 4" long.

Fuel Line Return To Tank Adapter - 2" O.D With 3/8" NPT Female Pipe Connection

These stainless steel fuel return adapters are perfect for an EFI conversion or any high output return style fuel system. These allow you to simply remove a small section of your 2" fuel fill hose and clamp the adapter in place - no welding required. 4" Long.

Fuel Lines Only for 4150 Style Holley (Regulator Not Included)

Here's an all NEW line and regulator kit that solves the age old problem of how to mount the regulator close to the carburetor. Precision bent stainless fuel line with all the necessary connection fittings make this the ultimate single carbureted fuel delivery system. Designed to work with the 715-13201 Aeromotive Regulator, see related parts.

Fuel Lines Only for Mechanical Secondary Demon Carburetors (Regulator Not Included)

Here's an all NEW line and regulator kit that solves the age old problem of how to mount the regulator close to the carburetor. Precision bent stainless fuel line with all the necessary connection fittings make this the ultimate single carbureted fuel delivery system. Designed to work with the 715-13201 Aeromotive Regulator, see related parts.

• Handmade, hand calibrated, tested for accuracy
• Bold, clear dials, white back light, and a red needle
• Non-corrosive hardware
• Gasket sealed lens and bezel to prevent fogging
• Plastic body Domelux Technology Lens
• White back light
• Senders sold separately
• 2 1/16 hole size, Outer diameter 2 5/16
• Not Designed to be used with Diesel Engines.

Need help measuring your gauges so you know what to look for when you finally upgrade to a more polished set? Check out this handy tutorial!

Fuel Pressure Sender 0-15 PSI for Old Style (Pre-2018) Hardin Gauges

Fuel Pressure Sender 0-60 PSI for Old Style (Pre-2018) Hardin Gauges

Fuel Pump Relay Kit

This Hardin Marine kit is intended primarily for those application running an electric fuel pump. The long wire runs in these kinds of installations can sometimes result in a voltage drop at the electric pump. Installation of this kit is good insurance that the fuel pump will be receiving full voltage from the battery.

Features:

• Can be used with any electric fuel pump, as long as the current load is not above 30 amps
• 30 amp relay is included with a relay socket wired with long leads specifically designed to reduce the number of splices required
• Quality insulated crimp connectors are provided to make the necessary splices, where required.

• Detailed instruction included

Fuel Pump Safety Switch

This fuel pump safety switch is designed to shut off your electric fuel pump when the engine oil pressure drops below 15 lbs.  It can easily be "Tee'd" into the oil pressure ending unit off the block.  Designed for 12Volt systems.

Fuel Sender Gasket

• ID: 1.50"
• OD: 2.70"

Replacement Gasket For Use With: 2-Wire, 3-Wire and Adjustable Fuel Level Senders