430-CC-20-07593 Riser/deflector plate. Replaces Chris-Craft 16.20-07593. Fits Chris-Craft V8 283, 302, 305, 307, 327 and 350 C.I.D., all models (log style direct replacement). - Replaces Chris Craft part #16.20-07593 (Order (2) of the appropriate gaskets according to your requirements).
Compatible parts: Manufactured by Barr Marine. Part number CC-20-07593.
|
|
430-CC-20-0828P Exhaust riser mounting package. Fits Chris-Craft V8 283, 302, 305, 307, 327 and 350 C.I.D., all models (log style direct replacement). Compatible parts: Manufactured by Barr Marine. Part number CC-20-0828P.
|
|
430-CC-6-80 Pressure relief valve adaptor package for use with Chris Craft direct replacement risers as needed. Fits these applications: - Chris-Craft V8 283, 302, 305, 307, 327 and 350 C.I.D., all models (log style direct replacement).
- Chris-Craft V8 283, 302, 305, 307, 327 and 350 C.I.D., all models (generic).
Compatible parts: - CC-1-07686 direct replacement water cooled manifold.
- 20-0000 swivel-type high discharge exhaust riser; 8 1/2" riser protection. Requires (1) mounting hardware kit #20-0002P per riser.
- 20-0031 swivel-type 90 degree exhaust elbow connector with internal water discharge. Accepts 2 1/2" to 3" I.D. exhaust hose.
- 20-0039 fully jacketed swivel-type exhaust riser; 7" riser protection. Requires (2) mounting hardware kits #20-0002P ((1) kit to mount riser to manifold and (1) kit to mount elbows #20-0034 or #20-0035 to riser).
- 20-0055 swivel-type 30 degree exhaust elbow connector; fully jacketed. Accepts 2 1/2" or 3" I.D. exhaust hose.
- CC-20-07605 direct replacement exhaust elbow.
- CC-20-08288 direct replacement port side riser.
- CC-20-08289 direct replacement starboard side riser.
Manufactured by Barr Marine. Part number CC-6-80.
|
|
430-CC47-1650-07597 Riser/tail pipe gasket. Replaces Chris-Craft 16.20-07597. Fits Chris-Craft V8 283, 302, 305, 307, 327 and 350 C.I.D., all models (log style direct replacement). - Also requires gasket CC47-1650-07596 (Order (2) of the appropriate gaskets according to your requirements).
Compatible parts: Manufactured by Barr Marine. Part number CC47-1650-07597.
|
|
430-CM-1-5972P Manifold to cylinder head mounting gasket set. Replaces Osco 7081-GH. Fits Chrysler V8 361, 383, 400, 413, 426 and 440 C.I.D., all models 1959 and up (log style direct replacement). Compatible parts: - CM-1-5972A direct replacement water cooled manifold for big block Chrysler.
- CM-20-4142411 exhaust riser/upper elbow. Direct replacement for Chrysler part #'s 3745639, 2847623, 2487404 and E9233M.
- CM-20-9234 exhaust riser lower elbow. Direct replacement for Chrysler part # E9234M.
- CM-20-1947617 exhaust elbow extension retainer.
- CM-20-9232 6" exhaust elbow high riser extension. Direct replacement for Chrysler part # E9232M.
Manufactured by Barr Marine. Part number CM-1-5972P.
|
|
430-CM-1-5972SS-P Manifold to cylinder head mounting kit (includes stainless steel studs and nuts, manifold to head gaskets and brass drain plugs). Fits Chrysler V8 361, 383, 400, 413, 426 and 440 C.I.D., all models 1959 and up (log style direct replacement). Compatible parts: - CM-1-5972A direct replacement water cooled manifold for big block Chrysler.
- CM-20-4142411 exhaust riser/upper elbow. Direct replacement for Chrysler part #'s 3745639, 2847623, 2487404 and E9233M.
- CM-20-9234 exhaust riser lower elbow. Direct replacement for Chrysler part # E9234M.
- CM-20-1947617 exhaust elbow extension retainer.
- CM-20-9232 6" exhaust elbow high riser extension. Direct replacement for Chrysler part # E9232M.
Manufactured by Barr Marine. Part number CM-1-5972SS-P.
|
|
430-CM-1-5972D Copper water distribution tube. Replaces Osco 424 and Mallory 9-40341. Fits Chrysler V8 361, 383, 400, 413, 426 and 440 C.I.D., all models 1959 and up (log style direct replacement). - Replaces original tube where used.
Compatible parts: - CM-1-5972A direct replacement water cooled manifold for big block Chrysler.
- CM-20-4142411 exhaust riser/upper elbow. Direct replacement for Chrysler part #'s 3745639, 2847623, 2487404 and E9233M.
- CM-20-9234 exhaust riser lower elbow. Direct replacement for Chrysler part # E9234M.
- CM-20-1947617 exhaust elbow extension retainer.
- CM-20-9232 6" exhaust elbow high riser extension. Direct replacement for Chrysler part # E9232M.
Manufactured by Barr Marine. Part number CM-1-5972D.
|
|
430-CM-1-5972C End plate gasket, (2) required per manifold. Replaces Osco 121 and Mallory 9-65301. Fits Chrysler V8 361, 383, 400, 413, 426 and 440 C.I.D., all models 1959 and up (log style direct replacement). Compatible parts: - CM-1-5972A direct replacement water cooled manifold for big block Chrysler.
- CM-20-4142411 exhaust riser/upper elbow. Direct replacement for Chrysler part #'s 3745639, 2847623, 2487404 and E9233M.
- CM-20-9234 exhaust riser lower elbow. Direct replacement for Chrysler part # E9234M.
- CM-20-1947617 exhaust elbow extension retainer.
- CM-20-9232 6" exhaust elbow high riser extension. Direct replacement for Chrysler part # E9232M.
Manufactured by Barr Marine. Part number CM-1-5972C.
|
|
430-CM-1-5972A Direct replacement water cooled manifold for big block Chrysler. Replaces Chrysler 3619695/E7081M, Osco 7081 and Mallory 9-40300. Fits Chrysler V8 361, 383, 400, 413, 426 and 440 C.I.D., all models 1959 and up (log style direct replacement). Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.'s are achieved after replacing an OEM manifold with Barr replacement parts. - Includes gaskets and plugs. Manifold mounting hardware must be purchased separately.
- 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).
Compatible parts: - CM-20-4142411 exhaust riser/upper elbow. Direct replacement for Chrysler part #'s 3745639, 2847623, 2487404 and E9233M.
- CM-20-9234 exhaust riser lower elbow. Direct replacement for Chrysler part # E9234M.
- CM-20-1947617 exhaust elbow extension retainer.
- CM-20-9232 6" exhaust elbow high riser extension. Direct replacement for Chrysler part # E9232M.
- 1-0007 adaptor for rear end of manifold. Use with Barr style exhaust risers or elbow connectors.
- CM-1-5972B direct replacement front end plate.
- CM-1-5972C end plate gasket, (2) required per manifold.
- CM-1-5972D copper water distribution tube.
- CM-1-5972G-P manifold to cylinder head mounitng kit (includes bolts, manifold to head gaskets and brass drain plug).
- CM-1-5972P manifold to cylinder head mounting gasket set.
- CM-1-5972SS-P manifold to cylinder head mounting kit (includes stainless steel studs and nuts, manifold to head gaskets and brass drain plugs).
- CM-20-4142411P mounting kit for upper riser/elbow (includes sleeve, O-rings, retainers, bolts and pipe plugs).
- CM-20-9224 exhaust to elbow extension retainer sleeve.
- CM-20-9225 exhaust to elbow extension inner seal.
- CM-20-9226 exhaust to elbow extension outer seal.
- CM-20-9232P mounting kit for 6" extension (includes sleeve, O-rings, retainers and bolts).
- CM-20-9234P mounitng kit for lower elbow riser (includes bolts, gasket and pipe plugs).
- CM-50-6023040 stainless steel exhaust manifold stud.
Manufactured by Barr Marine. Part number CM-1-5972A.
|
|
430-CM-1-5972G-P Manifold to cylinder head mounitng kit (includes bolts, manifold to head gaskets and brass drain plug). Fits Chrysler V8 361, 383, 400, 413, 426 and 440 C.I.D., all models 1959 and up (log style direct replacement). Compatible parts: - CM-1-5972A direct replacement water cooled manifold for big block Chrysler.
- CM-20-4142411 exhaust riser/upper elbow. Direct replacement for Chrysler part #'s 3745639, 2847623, 2487404 and E9233M.
- CM-20-9234 exhaust riser lower elbow. Direct replacement for Chrysler part # E9234M.
- CM-20-1947617 exhaust elbow extension retainer.
- CM-20-9232 6" exhaust elbow high riser extension. Direct replacement for Chrysler part # E9232M.
Manufactured by Barr Marine. Part number CM-1-5972G-P.
|
|
430-CM-1-5972B Direct replacement front end plate. Replaces Osco 150 and Mallory 9-40340. Fits Chrysler V8 361, 383, 400, 413, 426 and 440 C.I.D., all models 1959 and up (log style direct replacement). Compatible parts: - CM-1-5972A direct replacement water cooled manifold for big block Chrysler.
- CM-20-4142411 exhaust riser/upper elbow. Direct replacement for Chrysler part #'s 3745639, 2847623, 2487404 and E9233M.
- CM-20-9234 exhaust riser lower elbow. Direct replacement for Chrysler part # E9234M.
- CM-20-1947617 exhaust elbow extension retainer.
- CM-20-9232 6" exhaust elbow high riser extension. Direct replacement for Chrysler part # E9232M.
Manufactured by Barr Marine. Part number CM-1-5972B.
|
|
430-2670 Complete Barr Marine exhaust kit for the Chrysler Big Block V8 (log style). Everything listed below is included in this kit, so the complete exhaust setup can be ordered under one part number. Kit includes: - (2) CM-1-5972A Chrysler Big Block V8 Exhaust Manifold. Direct replacement water cooled manifold for big block Chrysler. Replaces Chrysler 3619695/E7081M, Osco 7081 and Mallory 9-40300.
- (2) CM-1-5972G-P Chrysler Big Block V8 Exhaust Manifold Mounting Kit. Manifold to cylinder head mounting kit (includes bolts, manifold to head gaskets and brass drain plug).
- (2) CM-20-9234 Chrysler Big Block V8 Lower Riser Elbow. Exhaust riser lower elbow. Direct replacement for Chrysler part # E9234M. Replaces Mallory 9-40314.
- (2) CM-20-9234P Chrysler Big Block V8 Lower Elbow Mounting Kit. Mounting kit for lower elbow riser (includes bolts, gasket and pipe plugs).
- (2) CM-20-4142411 Chrysler V8 Upper Riser Elbow. Exhaust riser/upper elbow. Direct replacement for Chrysler part #''s 3745639, 2847623, 2487404 and E9233M. Replaces Chrysler 2847405/2847623/3745639/E9233M, Osco 5639 and Mallory 9-40311.
- (2) CM-20-4142411P Chrysler V8 Upper Riser Mounting Kit. Mounting kit for upper riser/elbow (includes sleeve, O-rings, retainers, bolts and pipe plugs).
Fits Chrysler V8 361, 383, 400, 413, 426 and 440 C.I.D., all models 1959 and up (log style direct replacement). Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.''s are achieved after replacing an OEM manifold with Barr replacement parts. - 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).
Compatible parts: - CM-20-1947617 exhaust elbow extension retainer.
- CM-20-9232 6" exhaust elbow high riser extension. Direct replacement for Chrysler part # E9232M.
- 1-0007 adaptor for rear end of manifold. Use with Barr style exhaust risers or elbow connectors.
- CM-1-5972B direct replacement front end plate.
- CM-1-5972C end plate gasket, (2) required per manifold.
- CM-1-5972D copper water distribution tube.
- CM-1-5972P manifold to cylinder head mounting gasket set.
- CM-1-5972SS-P manifold to cylinder head mounting kit (includes stainless steel studs and nuts, manifold to head gaskets and brass drain plugs).
- CM-20-9224 exhaust to elbow extension retainer sleeve.
- CM-20-9225 exhaust to elbow extension inner seal.
- CM-20-9226 exhaust to elbow extension outer seal.
- CM-20-9232P mounting kit for 6" extension (includes sleeve, O-rings, retainers and bolts).
- CM-50-6023040 stainless steel exhaust manifold stud.
- CM-1-6677A direct replacement water cooled manifold for model years 1973 to 1986.
- CM-20-2600402 exhaust riser lower elbow. Direct replacement for Chrysler part # 2600402.
- CM-20-2847405 90 degree exhaust elbow. Direct replacement for Chrysler part #''s 2847405 and 2469639.
- CM-20-6672 fully jacketed 20 degree exhaust elbow. Accepts 3" I.D. exhaust hose.
- CM-20-6674 fully jacketed exhaust riser. 6" riser protection. Direct replacement for Chrysler part # 2846689.
- CM-1-6672B front end plate without the water connector, (1) required per manifold (Chrysler part # 2846106). May require mounting kit # CM-1-6672B-P (shown on next page).
- CM-1-6672C adaptor for rear end of manifold. Use with Barr style exhaust risers or elbows, (1) required per manifold.
- CM-1-6672E copper water distribution tube, (1) required per manifold. Will fit both manifold styles.
- CM-1-6672H front end plate with 1/2" N.P.T. water connection. For use where water connection is made from the front of the manifold.
- CM-1-6677P manifold to cylinder head mounting kit (Order (1) of the appropriate mounting kits according to your requirements).
- CM-1-6677SS-P stainless steel manifold to cylinder head mounting kit (includes stainless studs, nuts, manifold to head gaskets and brass drain plugs).
- CM-20-6672P mounting kit for exhaust elbow connector for raw water cooled manifold (includes bolts, gasket and pipe plug).
Composite kit picture shown is for reference only. See list of included parts above in the description.
|
|
430-2690 Complete Barr Marine exhaust kit for the Chrysler Big Block V8 (log style). Everything listed below is included in this kit, so the complete exhaust setup can be ordered under one part number. Kit includes: - (2) CM-1-5972A Chrysler Big Block V8 Exhaust Manifold. Direct replacement water cooled manifold for big block Chrysler. Replaces Chrysler 3619695/E7081M, Osco 7081 and Mallory 9-40300.
- (2) CM-1-5972SS-P Chrysler Big Block V8 Stainless Exhaust Manifold Mounting Kit. Manifold to cylinder head mounting kit (includes stainless steel studs and nuts, manifold to head gaskets and brass drain plugs).
- (2) CM-20-9234 Chrysler Big Block V8 Lower Riser Elbow. Exhaust riser lower elbow. Direct replacement for Chrysler part # E9234M. Replaces Mallory 9-40314.
- (2) CM-20-9234P Chrysler Big Block V8 Lower Elbow Mounting Kit. Mounting kit for lower elbow riser (includes bolts, gasket and pipe plugs).
- (2) CM-20-4142411 Chrysler V8 Upper Riser Elbow. Exhaust riser/upper elbow. Direct replacement for Chrysler part #''s 3745639, 2847623, 2487404 and E9233M. Replaces Chrysler 2847405/2847623/3745639/E9233M, Osco 5639 and Mallory 9-40311.
- (2) CM-20-4142411P Chrysler V8 Upper Riser Mounting Kit. Mounting kit for upper riser/elbow (includes sleeve, O-rings, retainers, bolts and pipe plugs).
Fits Chrysler V8 361, 383, 400, 413, 426 and 440 C.I.D., all models 1959 and up (log style direct replacement). Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.''s are achieved after replacing an OEM manifold with Barr replacement parts. - 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).
Compatible parts: - CM-20-1947617 exhaust elbow extension retainer.
- CM-20-9232 6" exhaust elbow high riser extension. Direct replacement for Chrysler part # E9232M.
- 1-0007 adaptor for rear end of manifold. Use with Barr style exhaust risers or elbow connectors.
- CM-1-5972B direct replacement front end plate.
- CM-1-5972C end plate gasket, (2) required per manifold.
- CM-1-5972D copper water distribution tube.
- CM-1-5972G-P manifold to cylinder head mounting kit (includes bolts, manifold to head gaskets and brass drain plug).
- CM-1-5972P manifold to cylinder head mounting gasket set.
- CM-20-9224 exhaust to elbow extension retainer sleeve.
- CM-20-9225 exhaust to elbow extension inner seal.
- CM-20-9226 exhaust to elbow extension outer seal.
- CM-20-9232P mounting kit for 6" extension (includes sleeve, O-rings, retainers and bolts).
- CM-50-6023040 stainless steel exhaust manifold stud.
- CM-1-6677A direct replacement water cooled manifold for model years 1973 to 1986.
- CM-20-2600402 exhaust riser lower elbow. Direct replacement for Chrysler part # 2600402.
- CM-20-2847405 90 degree exhaust elbow. Direct replacement for Chrysler part #''s 2847405 and 2469639.
- CM-20-6672 fully jacketed 20 degree exhaust elbow. Accepts 3" I.D. exhaust hose.
- CM-20-6674 fully jacketed exhaust riser. 6" riser protection. Direct replacement for Chrysler part # 2846689.
- CM-1-6672B front end plate without the water connector, (1) required per manifold (Chrysler part # 2846106). May require mounting kit # CM-1-6672B-P (shown on next page).
- CM-1-6672C adaptor for rear end of manifold. Use with Barr style exhaust risers or elbows, (1) required per manifold.
- CM-1-6672E copper water distribution tube, (1) required per manifold. Will fit both manifold styles.
- CM-1-6672H front end plate with 1/2" N.P.T. water connection. For use where water connection is made from the front of the manifold.
- CM-1-6677P manifold to cylinder head mounting kit (Order (1) of the appropriate mounting kits according to your requirements).
- CM-1-6677SS-P stainless steel manifold to cylinder head mounting kit (includes stainless studs, nuts, manifold to head gaskets and brass drain plugs).
- CM-20-6672P mounting kit for exhaust elbow connector for raw water cooled manifold (includes bolts, gasket and pipe plug).
Composite kit picture shown is for reference only. See list of included parts above in the description.
|
|
430-2680 Complete Barr Marine exhaust kit for the Chrysler Big Block V8 (log style). Everything listed below is included in this kit, so the complete exhaust setup can be ordered under one part number. Kit includes: - (2) CM-1-5972A Chrysler Big Block V8 Exhaust Manifold. Direct replacement water cooled manifold for big block Chrysler. Replaces Chrysler 3619695/E7081M, Osco 7081 and Mallory 9-40300.
- (2) CM-1-5972G-P Chrysler Big Block V8 Exhaust Manifold Mounting Kit. Manifold to cylinder head mounting kit (includes bolts, manifold to head gaskets and brass drain plug).
- (2) CM-20-9234 Chrysler Big Block V8 Lower Riser Elbow. Exhaust riser lower elbow. Direct replacement for Chrysler part # E9234M. Replaces Mallory 9-40314.
- (2) CM-20-9234P Chrysler Big Block V8 Lower Elbow Mounting Kit. Mounting kit for lower elbow riser (includes bolts, gasket and pipe plugs).
- (2) CM-20-9232 Chrysler V8 High Riser Elbow Extension 6 Inch. 6" exhaust elbow high riser extension. Direct replacement for Chrysler part # E9232M. Replaces Chrysler E9232M.
- (2) CM-20-9232P Chrysler V8 6 Inch Extension Mounting Kit. Mounting kit for 6" extension (includes sleeve, O-rings, retainers and bolts). Replaces Osco 7087-MK.
- (2) CM-20-4142411 Chrysler V8 Upper Riser Elbow. Exhaust riser/upper elbow. Direct replacement for Chrysler part #''s 3745639, 2847623, 2487404 and E9233M. Replaces Chrysler 2847405/2847623/3745639/E9233M, Osco 5639 and Mallory 9-40311.
- (2) CM-20-4142411P Chrysler V8 Upper Riser Mounting Kit. Mounting kit for upper riser/elbow (includes sleeve, O-rings, retainers, bolts and pipe plugs).
Fits Chrysler V8 361, 383, 400, 413, 426 and 440 C.I.D., all models 1959 and up (log style direct replacement). Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.''s are achieved after replacing an OEM manifold with Barr replacement parts. - 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).
Compatible parts: - CM-20-1947617 exhaust elbow extension retainer.
- 1-0007 adaptor for rear end of manifold. Use with Barr style exhaust risers or elbow connectors.
- CM-1-5972B direct replacement front end plate.
- CM-1-5972C end plate gasket, (2) required per manifold.
- CM-1-5972D copper water distribution tube.
- CM-1-5972P manifold to cylinder head mounting gasket set.
- CM-1-5972SS-P manifold to cylinder head mounting kit (includes stainless steel studs and nuts, manifold to head gaskets and brass drain plugs).
- CM-20-9224 exhaust to elbow extension retainer sleeve.
- CM-20-9225 exhaust to elbow extension inner seal.
- CM-20-9226 exhaust to elbow extension outer seal.
- CM-50-6023040 stainless steel exhaust manifold stud.
- CM-1-6677A direct replacement water cooled manifold for model years 1973 to 1986.
- CM-20-2600402 exhaust riser lower elbow. Direct replacement for Chrysler part # 2600402.
- CM-20-2847405 90 degree exhaust elbow. Direct replacement for Chrysler part #''s 2847405 and 2469639.
- CM-20-6672 fully jacketed 20 degree exhaust elbow. Accepts 3" I.D. exhaust hose.
- CM-20-6674 fully jacketed exhaust riser. 6" riser protection. Direct replacement for Chrysler part # 2846689.
- CM-1-6672B front end plate without the water connector, (1) required per manifold (Chrysler part # 2846106). May require mounting kit # CM-1-6672B-P (shown on next page).
- CM-1-6672C adaptor for rear end of manifold. Use with Barr style exhaust risers or elbows, (1) required per manifold.
- CM-1-6672E copper water distribution tube, (1) required per manifold. Will fit both manifold styles.
- CM-1-6672H front end plate with 1/2" N.P.T. water connection. For use where water connection is made from the front of the manifold.
- CM-1-6677P manifold to cylinder head mounting kit (Order (1) of the appropriate mounting kits according to your requirements).
- CM-1-6677SS-P stainless steel manifold to cylinder head mounting kit (includes stainless studs, nuts, manifold to head gaskets and brass drain plugs).
- CM-20-6672P mounting kit for exhaust elbow connector for raw water cooled manifold (includes bolts, gasket and pipe plug).
Composite kit picture shown is for reference only. See list of included parts above in the description.
|
|
430-2700 Complete Barr Marine exhaust kit for the Chrysler Big Block V8 (log style). Everything listed below is included in this kit, so the complete exhaust setup can be ordered under one part number. Kit includes: - (2) CM-1-5972A Chrysler Big Block V8 Exhaust Manifold. Direct replacement water cooled manifold for big block Chrysler. Replaces Chrysler 3619695/E7081M, Osco 7081 and Mallory 9-40300.
- (2) CM-1-5972SS-P Chrysler Big Block V8 Stainless Exhaust Manifold Mounting Kit. Manifold to cylinder head mounting kit (includes stainless steel studs and nuts, manifold to head gaskets and brass drain plugs).
- (2) CM-20-9234 Chrysler Big Block V8 Lower Riser Elbow. Exhaust riser lower elbow. Direct replacement for Chrysler part # E9234M. Replaces Mallory 9-40314.
- (2) CM-20-9234P Chrysler Big Block V8 Lower Elbow Mounting Kit. Mounting kit for lower elbow riser (includes bolts, gasket and pipe plugs).
- (2) CM-20-9232 Chrysler V8 High Riser Elbow Extension 6 Inch. 6" exhaust elbow high riser extension. Direct replacement for Chrysler part # E9232M. Replaces Chrysler E9232M.
- (2) CM-20-9232P Chrysler V8 6 Inch Extension Mounting Kit. Mounting kit for 6" extension (includes sleeve, O-rings, retainers and bolts). Replaces Osco 7087-MK.
- (2) CM-20-4142411 Chrysler V8 Upper Riser Elbow. Exhaust riser/upper elbow. Direct replacement for Chrysler part #''s 3745639, 2847623, 2487404 and E9233M. Replaces Chrysler 2847405/2847623/3745639/E9233M, Osco 5639 and Mallory 9-40311.
- (2) CM-20-4142411P Chrysler V8 Upper Riser Mounting Kit. Mounting kit for upper riser/elbow (includes sleeve, O-rings, retainers, bolts and pipe plugs).
Fits Chrysler V8 361, 383, 400, 413, 426 and 440 C.I.D., all models 1959 and up (log style direct replacement). Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.''s are achieved after replacing an OEM manifold with Barr replacement parts. - 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).
Compatible parts: - CM-20-1947617 exhaust elbow extension retainer.
- 1-0007 adaptor for rear end of manifold. Use with Barr style exhaust risers or elbow connectors.
- CM-1-5972B direct replacement front end plate.
- CM-1-5972C end plate gasket, (2) required per manifold.
- CM-1-5972D copper water distribution tube.
- CM-1-5972G-P manifold to cylinder head mounting kit (includes bolts, manifold to head gaskets and brass drain plug).
- CM-1-5972P manifold to cylinder head mounting gasket set.
- CM-20-9224 exhaust to elbow extension retainer sleeve.
- CM-20-9225 exhaust to elbow extension inner seal.
- CM-20-9226 exhaust to elbow extension outer seal.
- CM-50-6023040 stainless steel exhaust manifold stud.
- CM-1-6677A direct replacement water cooled manifold for model years 1973 to 1986.
- CM-20-2600402 exhaust riser lower elbow. Direct replacement for Chrysler part # 2600402.
- CM-20-2847405 90 degree exhaust elbow. Direct replacement for Chrysler part #''s 2847405 and 2469639.
- CM-20-6672 fully jacketed 20 degree exhaust elbow. Accepts 3" I.D. exhaust hose.
- CM-20-6674 fully jacketed exhaust riser. 6" riser protection. Direct replacement for Chrysler part # 2846689.
- CM-1-6672B front end plate without the water connector, (1) required per manifold (Chrysler part # 2846106). May require mounting kit # CM-1-6672B-P (shown on next page).
- CM-1-6672C adaptor for rear end of manifold. Use with Barr style exhaust risers or elbows, (1) required per manifold.
- CM-1-6672E copper water distribution tube, (1) required per manifold. Will fit both manifold styles.
- CM-1-6672H front end plate with 1/2" N.P.T. water connection. For use where water connection is made from the front of the manifold.
- CM-1-6677P manifold to cylinder head mounting kit (Order (1) of the appropriate mounting kits according to your requirements).
- CM-1-6677SS-P stainless steel manifold to cylinder head mounting kit (includes stainless studs, nuts, manifold to head gaskets and brass drain plugs).
- CM-20-6672P mounting kit for exhaust elbow connector for raw water cooled manifold (includes bolts, gasket and pipe plug).
Composite kit picture shown is for reference only. See list of included parts above in the description.
|
|
430-CM-20-9234P Mounitng kit for lower elbow riser (includes bolts, gasket and pipe plugs). Fits Chrysler V8 361, 383, 400, 413, 426 and 440 C.I.D., all models 1959 and up (log style direct replacement). Compatible parts: - CM-1-5972A direct replacement water cooled manifold for big block Chrysler.
- CM-20-4142411 exhaust riser/upper elbow. Direct replacement for Chrysler part #'s 3745639, 2847623, 2487404 and E9233M.
- CM-20-9234 exhaust riser lower elbow. Direct replacement for Chrysler part # E9234M.
- CM-20-1947617 exhaust elbow extension retainer.
- CM-20-9232 6" exhaust elbow high riser extension. Direct replacement for Chrysler part # E9232M.
Manufactured by Barr Marine. Part number CM-20-9234P.
|
|
430-CM-20-9234 Exhaust riser lower elbow. Direct replacement for Chrysler part # E9234M. Replaces Mallory 9-40314. Fits Chrysler V8 361, 383, 400, 413, 426 and 440 C.I.D., all models 1959 and up (log style direct replacement). Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.'s are achieved after replacing an OEM manifold with Barr replacement parts. - Swivel-style connector packages must be purchased separately for the corresponding riser/elbows.
- 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).
Compatible parts: - CM-1-5972A direct replacement water cooled manifold for big block Chrysler.
- CM-20-4142411 exhaust riser/upper elbow. Direct replacement for Chrysler part #'s 3745639, 2847623, 2487404 and E9233M.
- CM-20-1947617 exhaust elbow extension retainer.
- CM-20-9232 6" exhaust elbow high riser extension. Direct replacement for Chrysler part # E9232M.
- 1-0007 adaptor for rear end of manifold. Use with Barr style exhaust risers or elbow connectors.
- CM-1-5972B direct replacement front end plate.
- CM-1-5972C end plate gasket, (2) required per manifold.
- CM-1-5972D copper water distribution tube.
- CM-1-5972G-P manifold to cylinder head mounitng kit (includes bolts, manifold to head gaskets and brass drain plug).
- CM-1-5972P manifold to cylinder head mounting gasket set.
- CM-1-5972SS-P manifold to cylinder head mounting kit (includes stainless steel studs and nuts, manifold to head gaskets and brass drain plugs).
- CM-20-4142411P mounting kit for upper riser/elbow (includes sleeve, O-rings, retainers, bolts and pipe plugs).
- CM-20-9224 exhaust to elbow extension retainer sleeve.
- CM-20-9225 exhaust to elbow extension inner seal.
- CM-20-9226 exhaust to elbow extension outer seal.
- CM-20-9232P mounting kit for 6" extension (includes sleeve, O-rings, retainers and bolts).
- CM-20-9234P mounitng kit for lower elbow riser (includes bolts, gasket and pipe plugs).
- CM-50-6023040 stainless steel exhaust manifold stud.
Manufactured by Barr Marine. Part number CM-20-9234.
|
|
430-CM-50-6023040 Stainless steel exhaust manifold stud. Fits Chrysler V8 361, 383, 400, 413, 426 and 440 C.I.D., all models 1959 and up (log style direct replacement). Compatible parts: - CM-1-5972A direct replacement water cooled manifold for big block Chrysler.
- CM-20-4142411 exhaust riser/upper elbow. Direct replacement for Chrysler part #'s 3745639, 2847623, 2487404 and E9233M.
- CM-20-9234 exhaust riser lower elbow. Direct replacement for Chrysler part # E9234M.
- CM-20-1947617 exhaust elbow extension retainer.
- CM-20-9232 6" exhaust elbow high riser extension. Direct replacement for Chrysler part # E9232M.
Manufactured by Barr Marine. Part number CM-50-6023040.
|
|
430-534002 Adaptor kit (sold as shown) to fit the original Chrysler center riser exhaust manifold to the Barr style riser (part #534005). Adaptor must be used for Barr style riser. Fits Chrysler V8 273, 318, 340 and 360 C.I.D., all models 1986 and up (center riser direct replacement). Compatible parts: - CM-1-4417063 water cooled center discharge exhaust manifold to fit the small block Chrysler (1/2" N.P.T. cooling hose connections). Used during years 1986 and later.
- 534005 generic riser designed to be mounted to the original Chrysler center riser exhaust manifold (for use with 3" I.D. exhaust hose/3/4" N.P.T. cooling hose connection).
Manufactured by Barr Marine. Part number 534002.
|
|
430-534005 Generic riser designed to be mounted to the original Chrysler center riser exhaust manifold (for use with 3" I.D. exhaust hose/3/4" N.P.T. cooling hose connection). Fits Chrysler V8 273, 318, 340 and 360 C.I.D., all models 1986 and up (center riser direct replacement). Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.'s are achieved after replacing an OEM manifold with Barr replacement parts. - 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).
Compatible parts: - CM-1-4417063 water cooled center discharge exhaust manifold to fit the small block Chrysler (1/2" N.P.T. cooling hose connections). Used during years 1986 and later.
- 50-512-018 1/2" N.P.T. X 3/4" hose (straight barb) brass fitting.
- 50-512-019 3/4" N.P.T. X 3/4" hose (straight barb) brass fitting.
- 50-525-018 1/2" N.P.T. X 3/4" hose (90 degree) brass fitting.
- 50-525-019 3/4" N.P.T. X 3/4" hose (90 degree) brass fitting.
- 534002 adaptor kit (sold as shown) to fit the original Chrysler center riser exhaust manifold to the Barr style riser (part #534005). Adaptor must be used for Barr style riser.
- CM47-4417127 riser gasket for raw water cooled manifolds (installed between adaptor plate and riser).
- CM47-4417232 riser gasket for fresh water cooled manifolds (installed between manifold and adaptor plate).
Manufactured by Barr Marine. Part number 534005.
|
|
