Barr Marine

Direct replacement water cooled exhaust manifold starboard side (right). The exhaust connection is a 2-1/2" NPT threaded end plate. This is a log style exhaust manifold used in some GM V-8 marine engine applications.

Engine application: Chevrolet V8 OHV 305, 307, 327, 350 and 400 C.I.D., 1962 and up.

Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.'s are achieved after replacing an OEM manifold with Barr replacement parts.

• Manifold end plate and gasket listing: front end plate 1-0032, front gasket 1-0019, exhaust end plate 1-0025, exhaust end gasket 1-0019, header adaptor 1-0001.
• 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).

Manufactured by Barr Marine. Part number CHV-1-63R.

Complete Barr Marine exhaust kit for the Chevy Small Block V8 (aluminum center riser). Everything listed below is included in this kit, so the complete exhaust setup can be ordered under one part number.

Kit includes:

• (2) CHV-1-92 Chevy Small Block V8 Aluminum Center Riser Exhaust Manifold. Water cooled center discharge manifold to fit the small block GM engine (3/4" N.P.T. cooling hose connections). All years. Includes CHV-1-92P manifold mounting package to the cylinder head (bolts and pipe plugs).
• (2) 20-0108 Chevy V8 Aluminum Center Riser 3 Inch Exhaust Hose. Water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 3" I.D. exhaust hose. Includes 20-0107P riser mounting package to mount to the manifold.

Engine application: all small block Chevrolet V8 283 to 400 C.I.D.

Fits Chevrolet small block V8 283, 302, 305, 307, 327 and 350 C.I.D., all models (aluminum center riser generic).

The Barr Center Riser is a two-piece aluminum manifold/riser ideally suited for replacement use where riser protection is required. It uses flexible exhaust hose, which makes it easy to connect to existing exhaust lines, and all elbows (cast iron) can swivel inboard or outboard for a perfect fit. The manifold/riser is designed to limit back pressure on the engine, resulting in more efficient engine performance. The manifold and riser can be reversed and will fit either side of the engine. Cast of 356 T6 aluminum, well suited for fresh water marine applications.

• One year warranty.
• Not recommended for salt water use. Barr Marine does not warrant this product in salt water applications due to extreme corrosion.

Compatible parts:

• 20-0107 water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 4" I.D. exhaust hose.
• 1-0105 center riser manifold-to-riser gasket for fresh water cooling.
• 1-0107 center riser manifold-to-riser gasket (raw water cooling).
• 20-0087P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose.
• 20-0089P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose.
• 20-0093P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3 1/2" or 4" I.D. exhaust hose.
• 20-0107P riser mounting package for both 20-0107 and 20-0108.
• CHV-1-92P manifold mounting package (includes bolts and pipe plugs).
• CHV-47-0000 manifold to cylinder head gasket.
• CHVA-1-92 water cooled center discharge manifold to fit the big block GM engine (3/4" N.P.T. cooling hose connections). All years.
• CHVA-1-92P manifold mounting package (includes bolts and pipe plugs).
• CHVA-47-0000 manifold to cylinder head gasket.

Composite kit picture shown is for reference only. See list of included parts above in the description.

Complete Barr Marine exhaust kit for the Chevy Small Block V8 (aluminum center riser). Everything listed below is included in this kit, so the complete exhaust setup can be ordered under one part number.

Kit includes:

• (2) CHV-1-92 Chevy Small Block V8 Aluminum Center Riser Exhaust Manifold. Water cooled center discharge manifold to fit the small block GM engine (3/4" N.P.T. cooling hose connections). All years. Includes CHV-1-92P manifold mounting package to the cylinder head (bolts and pipe plugs).
• (2) 20-0107 Chevy V8 Aluminum Center Riser 4 Inch Exhaust Hose. Water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 4" I.D. exhaust hose. Includes 20-0107P riser mounting package to mount to the manifold.

Engine application: all small block Chevrolet V8 283 to 400 C.I.D.

Fits Chevrolet small block V8 283, 302, 305, 307, 327 and 350 C.I.D., all models (aluminum center riser generic).

The Barr Center Riser is a two-piece aluminum manifold/riser ideally suited for replacement use where riser protection is required. It uses flexible exhaust hose, which makes it easy to connect to existing exhaust lines, and all elbows (cast iron) can swivel inboard or outboard for a perfect fit. The manifold/riser is designed to limit back pressure on the engine, resulting in more efficient engine performance. The manifold and riser can be reversed and will fit either side of the engine. Cast of 356 T6 aluminum, well suited for fresh water marine applications.

• One year warranty.
• Not recommended for salt water use. Barr Marine does not warrant this product in salt water applications due to extreme corrosion.

Compatible parts:

• 20-0108 water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 3" I.D. exhaust hose.
• 1-0105 center riser manifold-to-riser gasket for fresh water cooling.
• 1-0107 center riser manifold-to-riser gasket (raw water cooling).
• 20-0087P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose.
• 20-0089P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose.
• 20-0093P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3 1/2" or 4" I.D. exhaust hose.
• 20-0107P riser mounting package for both 20-0107 and 20-0108.
• CHV-1-92P manifold mounting package (includes bolts and pipe plugs).
• CHV-47-0000 manifold to cylinder head gasket.
• CHVA-1-92 water cooled center discharge manifold to fit the big block GM engine (3/4" N.P.T. cooling hose connections). All years.
• CHVA-1-92P manifold mounting package (includes bolts and pipe plugs).
• CHVA-47-0000 manifold to cylinder head gasket.

Composite kit picture shown is for reference only. See list of included parts above in the description.

Water cooled center discharge manifold to fit the small block GM engine (3/4" N.P.T. cooling hose connections). All years.

Engine application: all small block Chevrolet V8 283 to 400 C.I.D.

Fits Chevrolet small block V8 283, 302, 305, 307, 327 and 350 C.I.D., all models (aluminum center riser generic).

The Barr Center Riser is a two-piece aluminum manifold/riser ideally suited for replacement use where riser protection is required. It uses flexible exhaust hose, which makes it easy to connect to existing exhaust lines, and all elbows (cast iron) can swivel inboard or outboard for a perfect fit. The manifold/riser is designed to limit back pressure on the engine, resulting in more efficient engine performance. The manifold and riser can be reversed and will fit either side of the engine. Cast of 356 T6 aluminum, well suited for fresh water marine applications.

• Includes CHV-1-92P manifold mounting package to the cylinder head (bolts and pipe plugs).
• One year warranty.
• Not recommended for salt water use. Barr Marine does not warrant this product in salt water applications due to extreme corrosion.

Compatible parts:

• 20-0107 water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 4" I.D. exhaust hose.
• 20-0108 water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 3" I.D. exhaust hose.
• 1-0105 center riser manifold-to-riser gasket for fresh water cooling.
• 1-0107 center riser manifold-to-riser gasket (raw water cooling).
• 20-0087P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose.
• 20-0089P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose.
• 20-0093P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3 1/2" or 4" I.D. exhaust hose.
• 20-0107P riser mounting package for both 20-0107 and 20-0108.
• CHV-1-92P manifold mounting package (includes bolts and pipe plugs).
• CHV-47-0000 manifold to cylinder head gasket.

Manufactured by Barr Marine. Part number CHV-1-92.

Complete Barr Marine exhaust kit for the Chevy Small Block V8 (cast iron center riser). Everything listed below is included in this kit, so the complete exhaust setup can be ordered under one part number.

Kit includes:

• (2) CHV-1-83 Chevy Small Block V8 Cast Iron Center Riser Exhaust Manifold. Water cooled center discharge manifold to fit the small block GM engine (3/4" N.P.T. cooling hose connections). All years. Includes all plugs, gaskets and mounting hardware to the cylinder head. Replaces Marine Power 0994-000, Osco 994, Mallory 9-40110, HGE 1-83, Sierra 18-1997-1 and GLM 56230.
• (2) 20-0082 Water Cooled Center Riser 3 Inch Exhaust Hose. Water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 3" I.D. exhaust hose. Includes plugs, gasket and mounting hardware to mount to the manifold. Replaces Marine Power 0992-000, Osco 992, Mallory 9-40100, HGE 0082, Sierra 18-1999 and GLM 56110.

Engine application: all small block Chevrolet V8 283 to 400 C.I.D.

Fits these applications:

• Chris-Craft V8 283, 302, 305, 307, 327 and 350 C.I.D., all models (center riser generic).
• Crusader V8 283, 302, 305, 307, 327 and 350 C.I.D., all models (center riser generic).
• Flagship V8 283, 327 and 350 C.I.D., all models (center riser generic).
• Indmar V8 283, 305, 307, 327 and 350 C.I.D., all inboard models (center riser generic).
• MerCruiser V8 283, 302, 305, 307, 327 and 350 C.I.D., all models (center riser generic).
• OMC V8 283, 302, 305, 307 and 350 C.I.D., all models (center riser generic).
• Volvo V8 307 and 350 C.I.D., all models (center riser generic).

Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.''s are achieved after replacing an OEM manifold with Barr replacement parts.

• 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).

Compatible parts:

• 20-0100 water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 4" I.D. exhaust hose.
• 20-0102 water cooled center discharge riser (3/4" N.P.T. cooling hose connection).
• 20-0097 3" spacer block (complete with mounting hardware, gasket and 3/4" pipe plug). Capable of stacking.
• 1-0104P adaptor package for fresh water cooled manifold (includes gaskets and block off plate).
• 1-0105 center riser manifold-to-riser gasket for fresh water cooling.
• 1-0106P adaptor package for raw water cooling. Used in pre-heating applications (includes gaskets and block off plate with vent hole).
• 1-0107 center riser manifold-to-riser gasket (raw water cooling).
• 20-0082P riser mounting package for both 20-0082 and 20-0100.
• 20-0082SS P stainless steel mounting package (with brass plugs) for both 20-0082 and 20-0100.
• 20-0084P straight exhaust adaptor (includes adaptor, hose and clamps). For use with 3 1/2" I.D. exhaust hose.
• 20-0085P straight exhaust adaptor (includes adaptor, hose and clamps). For use with 2 1/2" I.D. exhaust hose.
• 20-0086P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 2 1/2" I.D. exhaust hose.
• 20-0087P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose.
• 20-0088P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 2 1/2" I.D. exhaust hose.
• 20-0089P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose.
• 20-0092P 45 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose.
• 20-0093P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3 1/2" or 4" I.D. exhaust hose.
• CHV-1-83P manifold mounting package (includes bolts and pipe plugs).
• CHV-1-83SS-P stainless steel manifold mounting package (includes stainless bolts and brass plugs).
• CHV-27-0083 alternator bracket. Use where engine water pump is mounted on port side of engine below alternator.
• CHV-47-0000 manifold to cylinder head gasket.
• MC-45-0002 fuel filter/solenoid bracket.
• MC-6-0001P exhaust manifold plumbing fittings package for model 215.
• OMC-20-0003 hose bushing 3" to 3 1/2" (where applicable).
• CHVA-1-84 water cooled center discharge manifold to fit the big block GM engine (3/4" N.P.T. cooling hose connections). All years.
• FM-1-83 water cooled center discharge manifold to fit the small block Ford engine (3/4" N.P.T. cooling hose connections). All years.
• CHVA-1-84P manifold mounting package (includes bolts and pipe plugs).
• CHVA-1-84SS-P stainless steel manifold mounting package (includes stainless bolts and brass plugs).
• CHVA-47-0000 manifold to cylinder head gasket.
• FM-1-83P manifold mounting package (includes bolts and pipe plugs).
• FM-1-83SS-P stainless steel manifold mounting package (includes stainless bolts and brass plugs).
• FM-47-0000 manifold to cylinder head gasket.
• MC-27-47487 alternator bracket.
• MC-45-0000 fuel filter and solenoid universal mounting bracket.
• OMC-20-0000P hook up package; may be required for connection to stern drive units (exhaust hose and clamps not included).

Composite kit picture Shown is for reference only. See list of included parts above in the description.

Composite kit picture shown is for reference only. See list of included parts above in the description.

Complete Barr Marine exhaust kit for the Chevy Small Block V8 (cast iron center riser). Everything listed below is included in this kit, so the complete exhaust setup can be ordered under one part number.

Kit includes:

• (2) CHV-1-83 Chevy Small Block V8 Cast Iron Center Riser Exhaust Manifold. Water cooled center discharge manifold to fit the small block GM engine (3/4" N.P.T. cooling hose connections). All years. Includes all plugs, gaskets and mounting hardware to the cylinder head. Replaces Marine Power 0994-000, Osco 994, Mallory 9-40110, HGE 1-83, Sierra 18-1997-1 and GLM 56230.
• (2) 20-0082 Water Cooled Center Riser 3 Inch Exhaust Hose. Water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 3" I.D. exhaust hose. Includes plugs, gasket and mounting hardware to mount to the manifold. Replaces Marine Power 0992-000, Osco 992, Mallory 9-40100, HGE 0082, Sierra 18-1999 and GLM 56110.
• (2) 20-0097 Center Riser Spacer Block 3 Inch with Hardware. 3" spacer block (complete with mounting hardware, gasket and 3/4" pipe plug). Capable of stacking. Replaces Osco 994-S3, Mallory 9-40130 and GLM 56030.

Engine application: all small block Chevrolet V8 283 to 400 C.I.D.

Fits these applications:

• Chris-Craft V8 283, 302, 305, 307, 327 and 350 C.I.D., all models (center riser generic).
• Crusader V8 283, 302, 305, 307, 327 and 350 C.I.D., all models (center riser generic).
• Flagship V8 283, 327 and 350 C.I.D., all models (center riser generic).
• Indmar V8 283, 305, 307, 327 and 350 C.I.D., all inboard models (center riser generic).
• MerCruiser V8 283, 302, 305, 307, 327 and 350 C.I.D., all models (center riser generic).
• OMC V8 283, 302, 305, 307 and 350 C.I.D., all models (center riser generic).
• Volvo V8 307 and 350 C.I.D., all models (center riser generic).

Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.''s are achieved after replacing an OEM manifold with Barr replacement parts.

• 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).

Compatible parts:

• 20-0100 water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 4" I.D. exhaust hose.
• 20-0102 water cooled center discharge riser (3/4" N.P.T. cooling hose connection).
• 1-0104P adaptor package for fresh water cooled manifold (includes gaskets and block off plate).
• 1-0105 center riser manifold-to-riser gasket for fresh water cooling.
• 1-0106P adaptor package for raw water cooling. Used in pre-heating applications (includes gaskets and block off plate with vent hole).
• 1-0107 center riser manifold-to-riser gasket (raw water cooling).
• 20-0082P riser mounting package for both 20-0082 and 20-0100.
• 20-0082SS P stainless steel mounting package (with brass plugs) for both 20-0082 and 20-0100.
• 20-0084P straight exhaust adaptor (includes adaptor, hose and clamps). For use with 3 1/2" I.D. exhaust hose.
• 20-0085P straight exhaust adaptor (includes adaptor, hose and clamps). For use with 2 1/2" I.D. exhaust hose.
• 20-0086P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 2 1/2" I.D. exhaust hose.
• 20-0087P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose.
• 20-0088P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 2 1/2" I.D. exhaust hose.
• 20-0089P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose.
• 20-0092P 45 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose.
• 20-0093P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3 1/2" or 4" I.D. exhaust hose.
• CHV-1-83P manifold mounting package (includes bolts and pipe plugs).
• CHV-1-83SS-P stainless steel manifold mounting package (includes stainless bolts and brass plugs).
• CHV-27-0083 alternator bracket. Use where engine water pump is mounted on port side of engine below alternator.
• CHV-47-0000 manifold to cylinder head gasket.
• MC-45-0002 fuel filter/solenoid bracket.
• MC-6-0001P exhaust manifold plumbing fittings package for model 215.
• OMC-20-0003 hose bushing 3" to 3 1/2" (where applicable).
• CHVA-1-84 water cooled center discharge manifold to fit the big block GM engine (3/4" N.P.T. cooling hose connections). All years.
• FM-1-83 water cooled center discharge manifold to fit the small block Ford engine (3/4" N.P.T. cooling hose connections). All years.
• CHVA-1-84P manifold mounting package (includes bolts and pipe plugs).
• CHVA-1-84SS-P stainless steel manifold mounting package (includes stainless bolts and brass plugs).
• CHVA-47-0000 manifold to cylinder head gasket.
• FM-1-83P manifold mounting package (includes bolts and pipe plugs).
• FM-1-83SS-P stainless steel manifold mounting package (includes stainless bolts and brass plugs).
• FM-47-0000 manifold to cylinder head gasket.
• MC-27-47487 alternator bracket.
• MC-45-0000 fuel filter and solenoid universal mounting bracket.
• OMC-20-0000P hook up package; may be required for connection to stern drive units (exhaust hose and clamps not included).

Composite kit picture Shown is for reference only. See list of included parts above in the description.

Composite kit picture shown is for reference only. See list of included parts above in the description.

Complete Barr Marine exhaust kit for the Chevy Small Block V8 (cast iron center riser). Everything listed below is included in this kit, so the complete exhaust setup can be ordered under one part number.

Kit includes:

• (2) CHV-1-83 Chevy Small Block V8 Cast Iron Center Riser Exhaust Manifold. Water cooled center discharge manifold to fit the small block GM engine (3/4" N.P.T. cooling hose connections). All years. Includes all plugs, gaskets and mounting hardware to the cylinder head. Replaces Marine Power 0994-000, Osco 994, Mallory 9-40110, HGE 1-83, Sierra 18-1997-1 and GLM 56230.
• (2) 20-0100 Water Cooled Center Riser 4 Inch Exhaust Hose. Water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 4" I.D. exhaust hose. Includes plugs, gasket and mounting hardware to mount to the manifold. Designed to limit back pressure on the engine. For use with the Barr CHV-1-83, FM-1-83 and CHVA-1-84 manifolds. Replaces Marine Power 0992-400, Osco 99204, Mallory 9-40113 and GLM 56140.

Engine application: all small block Chevrolet V8 283 to 400 C.I.D.

Fits these applications:

• Chris-Craft V8 283, 302, 305, 307, 327 and 350 C.I.D., all models (center riser generic).
• Crusader V8 283, 302, 305, 307, 327 and 350 C.I.D., all models (center riser generic).
• Flagship V8 283, 327 and 350 C.I.D., all models (center riser generic).
• Indmar V8 283, 305, 307, 327 and 350 C.I.D., all inboard models (center riser generic).
• MerCruiser V8 283, 302, 305, 307, 327 and 350 C.I.D., all models (center riser generic).
• OMC V8 283, 302, 305, 307 and 350 C.I.D., all models (center riser generic).
• Volvo V8 307 and 350 C.I.D., all models (center riser generic).

Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.''s are achieved after replacing an OEM manifold with Barr replacement parts.

• 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).

Compatible parts:

• 20-0082 water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 3" I.D. exhaust hose.
• 20-0102 water cooled center discharge riser (3/4" N.P.T. cooling hose connection).
• 20-0097 3" spacer block (complete with mounting hardware, gasket and 3/4" pipe plug). Capable of stacking.
• 1-0104P adaptor package for fresh water cooled manifold (includes gaskets and block off plate).
• 1-0105 center riser manifold-to-riser gasket for fresh water cooling.
• 1-0106P adaptor package for raw water cooling. Used in pre-heating applications (includes gaskets and block off plate with vent hole).
• 1-0107 center riser manifold-to-riser gasket (raw water cooling).
• 20-0082P riser mounting package for both 20-0082 and 20-0100.
• 20-0082SS P stainless steel mounting package (with brass plugs) for both 20-0082 and 20-0100.
• 20-0084P straight exhaust adaptor (includes adaptor, hose and clamps). For use with 3 1/2" I.D. exhaust hose.
• 20-0085P straight exhaust adaptor (includes adaptor, hose and clamps). For use with 2 1/2" I.D. exhaust hose.
• 20-0086P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 2 1/2" I.D. exhaust hose.
• 20-0087P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose.
• 20-0088P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 2 1/2" I.D. exhaust hose.
• 20-0089P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose.
• 20-0092P 45 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose.
• 20-0093P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3 1/2" or 4" I.D. exhaust hose.
• CHV-1-83P manifold mounting package (includes bolts and pipe plugs).
• CHV-1-83SS-P stainless steel manifold mounting package (includes stainless bolts and brass plugs).
• CHV-27-0083 alternator bracket. Use where engine water pump is mounted on port side of engine below alternator.
• CHV-47-0000 manifold to cylinder head gasket.
• MC-45-0002 fuel filter/solenoid bracket.
• MC-6-0001P exhaust manifold plumbing fittings package for model 215.
• OMC-20-0003 hose bushing 3" to 3 1/2" (where applicable).
• CHVA-1-84 water cooled center discharge manifold to fit the big block GM engine (3/4" N.P.T. cooling hose connections). All years.
• FM-1-83 water cooled center discharge manifold to fit the small block Ford engine (3/4" N.P.T. cooling hose connections). All years.
• CHVA-1-84P manifold mounting package (includes bolts and pipe plugs).
• CHVA-1-84SS-P stainless steel manifold mounting package (includes stainless bolts and brass plugs).
• CHVA-47-0000 manifold to cylinder head gasket.
• FM-1-83P manifold mounting package (includes bolts and pipe plugs).
• FM-1-83SS-P stainless steel manifold mounting package (includes stainless bolts and brass plugs).
• FM-47-0000 manifold to cylinder head gasket.
• MC-27-47487 alternator bracket.
• MC-45-0000 fuel filter and solenoid universal mounting bracket.
• OMC-20-0000P hook up package; may be required for connection to stern drive units (exhaust hose and clamps not included).

Composite kit picture Shown is for reference only. See list of included parts above in the description.

Composite kit picture shown is for reference only. See list of included parts above in the description.

Complete Barr Marine exhaust kit for the Chevy Small Block V8 (cast iron center riser). Everything listed below is included in this kit, so the complete exhaust setup can be ordered under one part number.

Kit includes:

• (2) CHV-1-83 Chevy Small Block V8 Cast Iron Center Riser Exhaust Manifold. Water cooled center discharge manifold to fit the small block GM engine (3/4" N.P.T. cooling hose connections). All years. Includes all plugs, gaskets and mounting hardware to the cylinder head. Replaces Marine Power 0994-000, Osco 994, Mallory 9-40110, HGE 1-83, Sierra 18-1997-1 and GLM 56230.
• (2) 20-0100 Water Cooled Center Riser 4 Inch Exhaust Hose. Water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 4" I.D. exhaust hose. Includes plugs, gasket and mounting hardware to mount to the manifold. Designed to limit back pressure on the engine. For use with the Barr CHV-1-83, FM-1-83 and CHVA-1-84 manifolds. Replaces Marine Power 0992-400, Osco 99204, Mallory 9-40113 and GLM 56140.
• (2) 20-0097 Center Riser Spacer Block 3 Inch with Hardware. 3" spacer block (complete with mounting hardware, gasket and 3/4" pipe plug). Capable of stacking. Replaces Osco 994-S3, Mallory 9-40130 and GLM 56030.

Engine application: all small block Chevrolet V8 283 to 400 C.I.D.

Fits these applications:

• Chris-Craft V8 283, 302, 305, 307, 327 and 350 C.I.D., all models (center riser generic).
• Crusader V8 283, 302, 305, 307, 327 and 350 C.I.D., all models (center riser generic).
• Flagship V8 283, 327 and 350 C.I.D., all models (center riser generic).
• Indmar V8 283, 305, 307, 327 and 350 C.I.D., all inboard models (center riser generic).
• MerCruiser V8 283, 302, 305, 307, 327 and 350 C.I.D., all models (center riser generic).
• OMC V8 283, 302, 305, 307 and 350 C.I.D., all models (center riser generic).
• Volvo V8 307 and 350 C.I.D., all models (center riser generic).

Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.''s are achieved after replacing an OEM manifold with Barr replacement parts.

• 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).

Compatible parts:

• 20-0082 water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 3" I.D. exhaust hose.
• 20-0102 water cooled center discharge riser (3/4" N.P.T. cooling hose connection).
• 1-0104P adaptor package for fresh water cooled manifold (includes gaskets and block off plate).
• 1-0105 center riser manifold-to-riser gasket for fresh water cooling.
• 1-0106P adaptor package for raw water cooling. Used in pre-heating applications (includes gaskets and block off plate with vent hole).
• 1-0107 center riser manifold-to-riser gasket (raw water cooling).
• 20-0082P riser mounting package for both 20-0082 and 20-0100.
• 20-0082SS P stainless steel mounting package (with brass plugs) for both 20-0082 and 20-0100.
• 20-0084P straight exhaust adaptor (includes adaptor, hose and clamps). For use with 3 1/2" I.D. exhaust hose.
• 20-0085P straight exhaust adaptor (includes adaptor, hose and clamps). For use with 2 1/2" I.D. exhaust hose.
• 20-0086P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 2 1/2" I.D. exhaust hose.
• 20-0087P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose.
• 20-0088P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 2 1/2" I.D. exhaust hose.
• 20-0089P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose.
• 20-0092P 45 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose.
• 20-0093P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3 1/2" or 4" I.D. exhaust hose.
• CHV-1-83P manifold mounting package (includes bolts and pipe plugs).
• CHV-1-83SS-P stainless steel manifold mounting package (includes stainless bolts and brass plugs).
• CHV-27-0083 alternator bracket. Use where engine water pump is mounted on port side of engine below alternator.
• CHV-47-0000 manifold to cylinder head gasket.
• MC-45-0002 fuel filter/solenoid bracket.
• MC-6-0001P exhaust manifold plumbing fittings package for model 215.
• OMC-20-0003 hose bushing 3" to 3 1/2" (where applicable).
• CHVA-1-84 water cooled center discharge manifold to fit the big block GM engine (3/4" N.P.T. cooling hose connections). All years.
• FM-1-83 water cooled center discharge manifold to fit the small block Ford engine (3/4" N.P.T. cooling hose connections). All years.
• CHVA-1-84P manifold mounting package (includes bolts and pipe plugs).
• CHVA-1-84SS-P stainless steel manifold mounting package (includes stainless bolts and brass plugs).
• CHVA-47-0000 manifold to cylinder head gasket.
• FM-1-83P manifold mounting package (includes bolts and pipe plugs).
• FM-1-83SS-P stainless steel manifold mounting package (includes stainless bolts and brass plugs).
• FM-47-0000 manifold to cylinder head gasket.
• MC-27-47487 alternator bracket.
• MC-45-0000 fuel filter and solenoid universal mounting bracket.
• OMC-20-0000P hook up package; may be required for connection to stern drive units (exhaust hose and clamps not included).

Composite kit picture Shown is for reference only. See list of included parts above in the description.

Composite kit picture shown is for reference only. See list of included parts above in the description.

Complete Barr Marine exhaust kit for the Chevy Small Block V8 (cast iron center riser). Everything listed below is included in this kit, so the complete exhaust setup can be ordered under one part number.

Kit includes:

• (2) CHV-1-83 Chevy Small Block V8 Cast Iron Center Riser Exhaust Manifold. Water cooled center discharge manifold to fit the small block GM engine (3/4" N.P.T. cooling hose connections). All years. Includes all plugs, gaskets and mounting hardware to the cylinder head. Replaces Marine Power 0994-000, Osco 994, Mallory 9-40110, HGE 1-83, Sierra 18-1997-1 and GLM 56230.
• (2) 20-0102 Center Riser Replaces Indmar 532009. Water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Includes plugs, gasket and mounting hardware to mount to the manifold. Replaces Osco 2018, Mallory 9-40112 and GLM 56120.

Engine application: all small block Chevrolet V8 283 to 400 C.I.D.

Fits these applications:

• Chris-Craft V8 283, 302, 305, 307, 327 and 350 C.I.D., all models (center riser generic).
• Crusader V8 283, 302, 305, 307, 327 and 350 C.I.D., all models (center riser generic).
• Flagship V8 283, 327 and 350 C.I.D., all models (center riser generic).
• Indmar V8 283, 305, 307, 327 and 350 C.I.D., all inboard models (center riser generic).
• MerCruiser V8 283, 302, 305, 307, 327 and 350 C.I.D., all models (center riser generic).
• OMC V8 283, 302, 305, 307 and 350 C.I.D., all models (center riser generic).
• Volvo V8 307 and 350 C.I.D., all models (center riser generic).

Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.''s are achieved after replacing an OEM manifold with Barr replacement parts.

• 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).

Compatible parts:

• 20-0082 water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 3" I.D. exhaust hose.
• 20-0100 water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 4" I.D. exhaust hose.
• 20-0097 3" spacer block (complete with mounting hardware, gasket and 3/4" pipe plug). Capable of stacking.
• 1-0104P adaptor package for fresh water cooled manifold (includes gaskets and block off plate).
• 1-0105 center riser manifold-to-riser gasket for fresh water cooling.
• 1-0106P adaptor package for raw water cooling. Used in pre-heating applications (includes gaskets and block off plate with vent hole).
• 1-0107 center riser manifold-to-riser gasket (raw water cooling).
• 20-0082P riser mounting package for both 20-0082 and 20-0100.
• 20-0082SS P stainless steel mounting package (with brass plugs) for both 20-0082 and 20-0100.
• 20-0084P straight exhaust adaptor (includes adaptor, hose and clamps). For use with 3 1/2" I.D. exhaust hose.
• 20-0085P straight exhaust adaptor (includes adaptor, hose and clamps). For use with 2 1/2" I.D. exhaust hose.
• 20-0086P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 2 1/2" I.D. exhaust hose.
• 20-0087P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose.
• 20-0088P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 2 1/2" I.D. exhaust hose.
• 20-0089P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose.
• 20-0092P 45 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose.
• 20-0093P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3 1/2" or 4" I.D. exhaust hose.
• CHV-1-83P manifold mounting package (includes bolts and pipe plugs).
• CHV-1-83SS-P stainless steel manifold mounting package (includes stainless bolts and brass plugs).
• CHV-27-0083 alternator bracket. Use where engine water pump is mounted on port side of engine below alternator.
• CHV-47-0000 manifold to cylinder head gasket.
• MC-45-0002 fuel filter/solenoid bracket.
• MC-6-0001P exhaust manifold plumbing fittings package for model 215.
• OMC-20-0003 hose bushing 3" to 3 1/2" (where applicable).
• FM-1-83 water cooled center discharge manifold to fit the small block Ford engine (3/4" N.P.T. cooling hose connections). All years.
• FM-1-83P manifold mounting package (includes bolts and pipe plugs).
• FM-1-83SS-P stainless steel manifold mounting package (includes stainless bolts and brass plugs).
• FM-47-0000 manifold to cylinder head gasket.

Composite kit picture shown is for reference only. See list of included parts above in the description.

Complete Barr Marine exhaust kit for the Chevy Small Block V8 (cast iron center riser). Everything listed below is included in this kit, so the complete exhaust setup can be ordered under one part number.

Kit includes:

• (2) CHV-1-83 Chevy Small Block V8 Cast Iron Center Riser Exhaust Manifold. Water cooled center discharge manifold to fit the small block GM engine (3/4" N.P.T. cooling hose connections). All years. Includes all plugs, gaskets and mounting hardware to the cylinder head. Replaces Marine Power 0994-000, Osco 994, Mallory 9-40110, HGE 1-83, Sierra 18-1997-1 and GLM 56230.
• (2) 20-0102 Center Riser Replaces Indmar 532009. Water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Includes plugs, gasket and mounting hardware to mount to the manifold. Replaces Osco 2018, Mallory 9-40112 and GLM 56120.
• (2) 20-0097 Center Riser Spacer Block 3 Inch with Hardware. 3" spacer block (complete with mounting hardware, gasket and 3/4" pipe plug). Capable of stacking. Replaces Osco 994-S3, Mallory 9-40130 and GLM 56030.

Engine application: all small block Chevrolet V8 283 to 400 C.I.D.

Fits these applications:

• Chris-Craft V8 283, 302, 305, 307, 327 and 350 C.I.D., all models (center riser generic).
• Crusader V8 283, 302, 305, 307, 327 and 350 C.I.D., all models (center riser generic).
• Flagship V8 283, 327 and 350 C.I.D., all models (center riser generic).
• Indmar V8 283, 305, 307, 327 and 350 C.I.D., all inboard models (center riser generic).
• MerCruiser V8 283, 302, 305, 307, 327 and 350 C.I.D., all models (center riser generic).
• OMC V8 283, 302, 305, 307 and 350 C.I.D., all models (center riser generic).
• Volvo V8 307 and 350 C.I.D., all models (center riser generic).

Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.''s are achieved after replacing an OEM manifold with Barr replacement parts.

• 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).

Compatible parts:

• 20-0082 water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 3" I.D. exhaust hose.
• 20-0100 water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 4" I.D. exhaust hose.
• 1-0104P adaptor package for fresh water cooled manifold (includes gaskets and block off plate).
• 1-0105 center riser manifold-to-riser gasket for fresh water cooling.
• 1-0106P adaptor package for raw water cooling. Used in pre-heating applications (includes gaskets and block off plate with vent hole).
• 1-0107 center riser manifold-to-riser gasket (raw water cooling).
• 20-0082P riser mounting package for both 20-0082 and 20-0100.
• 20-0082SS P stainless steel mounting package (with brass plugs) for both 20-0082 and 20-0100.
• 20-0084P straight exhaust adaptor (includes adaptor, hose and clamps). For use with 3 1/2" I.D. exhaust hose.
• 20-0085P straight exhaust adaptor (includes adaptor, hose and clamps). For use with 2 1/2" I.D. exhaust hose.
• 20-0086P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 2 1/2" I.D. exhaust hose.
• 20-0087P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose.
• 20-0088P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 2 1/2" I.D. exhaust hose.
• 20-0089P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose.
• 20-0092P 45 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose.
• 20-0093P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3 1/2" or 4" I.D. exhaust hose.
• CHV-1-83P manifold mounting package (includes bolts and pipe plugs).
• CHV-1-83SS-P stainless steel manifold mounting package (includes stainless bolts and brass plugs).
• CHV-27-0083 alternator bracket. Use where engine water pump is mounted on port side of engine below alternator.
• CHV-47-0000 manifold to cylinder head gasket.
• MC-45-0002 fuel filter/solenoid bracket.
• MC-6-0001P exhaust manifold plumbing fittings package for model 215.
• OMC-20-0003 hose bushing 3" to 3 1/2" (where applicable).
• FM-1-83 water cooled center discharge manifold to fit the small block Ford engine (3/4" N.P.T. cooling hose connections). All years.
• FM-1-83P manifold mounting package (includes bolts and pipe plugs).
• FM-1-83SS-P stainless steel manifold mounting package (includes stainless bolts and brass plugs).
• FM-47-0000 manifold to cylinder head gasket.
• CHVA-1-84 water cooled center discharge manifold to fit the big block GM engine (3/4" N.P.T. cooling hose connections). All years.
• CHVA-1-84P manifold mounting package (includes bolts and pipe plugs).
• CHVA-1-84SS-P stainless steel manifold mounting package (includes stainless bolts and brass plugs).
• CHVA-47-0000 manifold to cylinder head gasket.
• MC-27-47487 alternator bracket.
• MC-45-0000 fuel filter and solenoid universal mounting bracket.
• OMC-20-0000P hook up package; may be required for connection to stern drive units (exhaust hose and clamps not included).

Composite kit picture Shown is for reference only. See list of included parts above in the description.

Composite kit picture shown is for reference only. See list of included parts above in the description.

Water cooled center discharge manifold to fit the small block GM engine (3/4" N.P.T. cooling hose connections). All years.

Replaces Marine Power 0994-000, Osco 994, Mallory 9-40110, HGE 1-83, Sierra 18-1997-1 and GLM 56230.

Engine application: all small block Chevrolet V8 283 to 400 C.I.D.

Fits these applications:

• Chris-Craft V8 283, 302, 305, 307, 327 and 350 C.I.D., all models (center riser generic).
• Crusader V8 283, 302, 305, 307, 327 and 350 C.I.D., all models (center riser generic).
• Flagship V8 283, 327 and 350 C.I.D., all models (center riser generic).
• Indmar V8 283, 305, 307, 327 and 350 C.I.D., all inboard models (center riser generic).
• MerCruiser V8 283, 302, 305, 307, 327 and 350 C.I.D., all models (center riser generic).
• OMC V8 283, 302, 305, 307 and 350 C.I.D., all models (center riser generic).
• Volvo V8 307 and 350 C.I.D., all models (center riser generic).

Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.'s are achieved after replacing an OEM manifold with Barr replacement parts.

• Includes all plugs, gaskets and mounting hardware to the cylinder head.
• 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).

Compatible parts:

• 20-0082 water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 3" I.D. exhaust hose.
• 20-0100 water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 4" I.D. exhaust hose.
• 20-0102 water cooled center discharge riser (3/4" N.P.T. cooling hose connection).
• 20-0097 3" spacer block (complete with mounting hardware, gasket and 3/4" pipe plug). Capable of stacking.
• 1-0104P adaptor package for fresh water cooled manifold (includes gaskets and block off plate).
• 1-0105 center riser manifold-to-riser gasket for fresh water cooling.
• 1-0106P adaptor package for raw water cooling. Used in pre-heating applications (includes gaskets and block off plate with vent hole).
• 1-0107 center riser manifold-to-riser gasket (raw water cooling).
• 20-0082P riser mounting package for both 20-0082 and 20-0100.
• 20-0082SS P stainless steel mounting package (with brass plugs) for both 20-0082 and 20-0100.
• 20-0084P straight exhaust adaptor (includes adaptor, hose and clamps). For use with 3 1/2" I.D. exhaust hose.
• 20-0085P straight exhaust adaptor (includes adaptor, hose and clamps). For use with 2 1/2" I.D. exhaust hose.
• 20-0086P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 2 1/2" I.D. exhaust hose.
• 20-0087P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose.
• 20-0088P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 2 1/2" I.D. exhaust hose.
• 20-0089P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose.
• 20-0092P 45 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose.
• 20-0093P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3 1/2" or 4" I.D. exhaust hose.
• CHV-1-83P manifold mounting package (includes bolts and pipe plugs).
• CHV-1-83SS-P stainless steel manifold mounting package (includes stainless bolts and brass plugs).
• CHV-27-0083 alternator bracket. Use where engine water pump is mounted on port side of engine below alternator.
• CHV-47-0000 manifold to cylinder head gasket.
• MC-45-0002 fuel filter/solenoid bracket.
• MC-6-0001P exhaust manifold plumbing fittings package for model 215.
• OMC-20-0003 hose bushing 3" to 3 1/2" (where applicable).

Manufactured by Barr Marine. Part number CHV-1-83.

Water cooled end discharge port manifold to fit the small block Chevrolet (1/2" N.P.T. cooling hose connections). All years

Fits these applications:

• Flagship V8 283, 327 and 350 C.I.D. (log style generic).
• OMC V8 283, 305, 307 and 350 C.I.D., Models 210, 215, 225, 235 and 245 H.P. (log style generic).

Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.'s are achieved after replacing an OEM manifold with Barr replacement parts.

• Manifold end plate and gasket listing: front end plate 1-0036, front gasket 1-0019, exhaust end plate 1-0025, exhaust end gasket 1-0019, header adaptor 1-0001.
• 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).

Compatible parts:

• OF-1-60R water cooled end discharge starboard manifold to fit the small block Chevrolet (1/2" N.P.T. cooling hose connections). All years.
• 20-0000 swivel-type high discharge exhaust riser; 8 1/2" riser protection. Requires (1) mounting hardware kit #20-0002P per riser.
• 20-0031 swivel-type 90 degree exhaust elbow connector with internal water discharge. Accepts 2 1/2" to 3" I.D. exhaust hose.
• 20-0039 fully jacketed swivel-type exhaust riser; 7" riser protection. Requires (2) mounting hardware kits #20-0002P ((1) kit to mount riser to manifold and (1) kit to mount elbows #20-0034 or #20-0035 to riser).
• 20-0055 swivel-type 30 degree exhaust elbow connector; fully jacketed. Accepts 2 1/2" or 3" I.D. exhaust hose.
• 1-0019 end plate gasket (will fit both ends).
• 20-0002P mounting hardware kit.
• CHV-47-0000 manifold to cylinder head gasket.
• OF-1-60F-P manifold to cylinder head mounting package.
• OMC47-909314 exhaust manifold to cylinder head gasket.

Manufactured by Barr Marine. Part number OF-1-60L.

Water cooled end discharge starboard manifold to fit the small block Chevrolet (1/2" N.P.T. cooling hose connections). All years

Fits these applications:

• Flagship V8 283, 327 and 350 C.I.D. (log style generic).
• OMC V8 283, 305, 307 and 350 C.I.D., Models 210, 215, 225, 235 and 245 H.P. (log style generic).

Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.'s are achieved after replacing an OEM manifold with Barr replacement parts.

• Manifold end plate and gasket listing: front end plate 1-0036, front gasket 1-0019, exhaust end plate 1-0025, exhaust end gasket 1-0019, header adaptor 1-0001.
• 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).

Compatible parts:

• OF-1-60L water cooled end discharge port manifold to fit the small block Chevrolet (1/2" N.P.T. cooling hose connections). All years.
• 20-0000 swivel-type high discharge exhaust riser; 8 1/2" riser protection. Requires (1) mounting hardware kit #20-0002P per riser.
• 20-0031 swivel-type 90 degree exhaust elbow connector with internal water discharge. Accepts 2 1/2" to 3" I.D. exhaust hose.
• 20-0039 fully jacketed swivel-type exhaust riser; 7" riser protection. Requires (2) mounting hardware kits #20-0002P ((1) kit to mount riser to manifold and (1) kit to mount elbows #20-0034 or #20-0035 to riser).
• 20-0055 swivel-type 30 degree exhaust elbow connector; fully jacketed. Accepts 2 1/2" or 3" I.D. exhaust hose.
• 1-0019 end plate gasket (will fit both ends).
• 20-0002P mounting hardware kit.
• CHV-47-0000 manifold to cylinder head gasket.
• OF-1-60F-P manifold to cylinder head mounting package.
• OMC47-909314 exhaust manifold to cylinder head gasket.

Manufactured by Barr Marine. Part number OF-1-60R.

Complete Barr Marine exhaust kit for the Chevy Small Block V8 (end discharge log style). Everything listed below is included in this kit, so the complete exhaust setup can be ordered under one part number.

Kit includes:

• (1) OF-1-60L port and (1) OF-1-60R starboard Chevy Small Block V8 End Discharge Exhaust Manifolds. Water cooled end discharge manifold to fit the small block Chevrolet (1/2" N.P.T. cooling hose connections). All years.
• (2) 1-0001 Exhaust Adaptor for Size A End Plate 2 Inch Pipe. Adaptor for Barr manifold replacing size "A" end plate (2" pipe).
• (2) 20-0055 Jacketed Swivel 30 Degree Exhaust Elbow. Swivel-type 30 degree exhaust elbow connector; fully jacketed. Accepts 2 1/2" or 3" I.D. exhaust hose. Barr exhaust risers and connectors can be swiveled inboard or outboard in the horizontal plane, and all except straight connectors can also be swiveled in the vertical plane.
• (2) 20-0002P Swivel Riser and Elbow Mounting Hardware Kit. Mounting hardware kit.

Fits these applications:

• Flagship V8 283, 327 and 350 C.I.D. (log style generic).
• OMC V8 283, 305, 307 and 350 C.I.D., Models 210, 215, 225, 235 and 245 H.P. (log style generic).

Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.''s are achieved after replacing an OEM manifold with Barr replacement parts.

• 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).

Compatible parts:

• 20-0000 swivel-type high discharge exhaust riser; 8 1/2" riser protection. Requires (1) mounting hardware kit #20-0002P per riser.
• 20-0031 swivel-type 90 degree exhaust elbow connector with internal water discharge. Accepts 2 1/2" to 3" I.D. exhaust hose.
• 20-0039 fully jacketed swivel-type exhaust riser; 7" riser protection. Requires (2) mounting hardware kits #20-0002P ((1) kit to mount riser to manifold and (1) kit to mount elbows #20-0034 or #20-0035 to riser).
• 1-0019 end plate gasket (will fit both ends).
• CHV-47-0000 manifold to cylinder head gasket.
• OF-1-60F-P manifold to cylinder head mounting package.
• OMC47-909314 exhaust manifold to cylinder head gasket.
• GR-1-6470L water cooled exhaust manifold (port side) to fit the 401 Buick. Includes all fittings, hose adaptors and primary water pump mounting provision.
• GR-1-6470R water cooled exhaust manifold (starboard side) to fit the 401 Buick. Includes all fittings, hose adaptors and primary water pump mounting provision.
• INT-1-5457L water cooled exhaust manifold (port side) for the Ford engine. Use with Barr risers and exhaust connectors.
• INT-1-5457R water cooled exhaust manifold (starboard) for the Ford engine. Use with Barr risers and exhaust connectors.
• INT-1-58L water cooled exhaust manifold (port) for the Ford engine. Use with Barr risers and connectors.
• INT-1-58R water cooled exhaust manifold (starboard) for the Ford engine. Use with Barr risers and connectors.
• INT-1-6268L water cooled exhaust manifold (port) for the Ford engine. Use with Barr risers and connectors.
• INT-1-6268R water cooled exhaust manfold (starboard for the Ford engine. Use with the Barr risers and connectors.
• 1-0022 end plate gasket (will fit both ends).

Composite kit picture shown is for reference only. See list of included parts above in the description.

Complete Barr Marine exhaust kit for the Chevy Small Block V8 (end discharge log style). Everything listed below is included in this kit, so the complete exhaust setup can be ordered under one part number.

Kit includes:

• (1) OF-1-60L port and (1) OF-1-60R starboard Chevy Small Block V8 End Discharge Exhaust Manifolds. Water cooled end discharge manifold to fit the small block Chevrolet (1/2" N.P.T. cooling hose connections). All years.
• (2) 1-0001 Exhaust Adaptor for Size A End Plate 2 Inch Pipe. Adaptor for Barr manifold replacing size "A" end plate (2" pipe).
• (2) 20-0039 Fully Jacketed Swivel Exhaust Riser 7 Inch Riser Protection. Fully jacketed swivel-type exhaust riser; 7" riser protection. Barr exhaust risers and connectors can be swiveled inboard or outboard in the horizontal plane, and all except straight connectors can also be swiveled in the vertical plane.
• (2) 20-0035 Exhaust Connector 2-1/2 Inch Hose for 20-0039 Riser. Exhaust connector #20-0035 (for 2 1/2" I.D. exhaust hose) or exhaust connector #20-0034 (for 3" I.D. exhaust hose). For 2-3/8" or 2-1/2" I.D. exhaust hose.
• (4) 20-0002P Swivel Riser and Elbow Mounting Hardware Kit. Mounting hardware kit.

Fits these applications:

• Flagship V8 283, 327 and 350 C.I.D. (log style generic).
• OMC V8 283, 305, 307 and 350 C.I.D., Models 210, 215, 225, 235 and 245 H.P. (log style generic).

Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.''s are achieved after replacing an OEM manifold with Barr replacement parts.

• 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).

Compatible parts:

• 20-0000 swivel-type high discharge exhaust riser; 8 1/2" riser protection. Requires (1) mounting hardware kit #20-0002P per riser.
• 20-0031 swivel-type 90 degree exhaust elbow connector with internal water discharge. Accepts 2 1/2" to 3" I.D. exhaust hose.
• 20-0055 swivel-type 30 degree exhaust elbow connector; fully jacketed. Accepts 2 1/2" or 3" I.D. exhaust hose.
• 1-0019 end plate gasket (will fit both ends).
• CHV-47-0000 manifold to cylinder head gasket.
• OF-1-60F-P manifold to cylinder head mounting package.
• OMC47-909314 exhaust manifold to cylinder head gasket.
• GR-1-6470L water cooled exhaust manifold (port side) to fit the 401 Buick. Includes all fittings, hose adaptors and primary water pump mounting provision.
• GR-1-6470R water cooled exhaust manifold (starboard side) to fit the 401 Buick. Includes all fittings, hose adaptors and primary water pump mounting provision.
• INT-1-5457L water cooled exhaust manifold (port side) for the Ford engine. Use with Barr risers and exhaust connectors.
• INT-1-5457R water cooled exhaust manifold (starboard) for the Ford engine. Use with Barr risers and exhaust connectors.
• INT-1-58L water cooled exhaust manifold (port) for the Ford engine. Use with Barr risers and connectors.
• INT-1-58R water cooled exhaust manifold (starboard) for the Ford engine. Use with Barr risers and connectors.
• INT-1-6268L water cooled exhaust manifold (port) for the Ford engine. Use with Barr risers and connectors.
• INT-1-6268R water cooled exhaust manfold (starboard for the Ford engine. Use with the Barr risers and connectors.
• 1-0022 end plate gasket (will fit both ends).

Composite kit picture shown is for reference only. See list of included parts above in the description.

Complete Barr Marine exhaust kit for the Chevy Small Block V8 (end discharge log style). Everything listed below is included in this kit, so the complete exhaust setup can be ordered under one part number.

Kit includes:

• (1) OF-1-60L port and (1) OF-1-60R starboard Chevy Small Block V8 End Discharge Exhaust Manifolds. Water cooled end discharge manifold to fit the small block Chevrolet (1/2" N.P.T. cooling hose connections). All years.
• (2) 1-0001 Exhaust Adaptor for Size A End Plate 2 Inch Pipe. Adaptor for Barr manifold replacing size "A" end plate (2" pipe).
• (2) 20-0039 Fully Jacketed Swivel Exhaust Riser 7 Inch Riser Protection. Fully jacketed swivel-type exhaust riser; 7" riser protection. Barr exhaust risers and connectors can be swiveled inboard or outboard in the horizontal plane, and all except straight connectors can also be swiveled in the vertical plane.
• (2) 20-0034 Exhaust Connector 3 Inch Hose for 20-0039 Riser. Exhaust connector #20-0035 (for 2 1/2" I.D. exhaust hose) or exhaust connector #20-0034 (for 3" I.D. exhaust hose). For 2-7/8" or 3" I.D. exhaust hose.
• (4) 20-0002P Swivel Riser and Elbow Mounting Hardware Kit. Mounting hardware kit.

Fits these applications:

• Flagship V8 283, 327 and 350 C.I.D. (log style generic).
• OMC V8 283, 305, 307 and 350 C.I.D., Models 210, 215, 225, 235 and 245 H.P. (log style generic).

Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.''s are achieved after replacing an OEM manifold with Barr replacement parts.

• 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).

Compatible parts:

• 20-0000 swivel-type high discharge exhaust riser; 8 1/2" riser protection. Requires (1) mounting hardware kit #20-0002P per riser.
• 20-0031 swivel-type 90 degree exhaust elbow connector with internal water discharge. Accepts 2 1/2" to 3" I.D. exhaust hose.
• 20-0055 swivel-type 30 degree exhaust elbow connector; fully jacketed. Accepts 2 1/2" or 3" I.D. exhaust hose.
• 1-0019 end plate gasket (will fit both ends).
• CHV-47-0000 manifold to cylinder head gasket.
• OF-1-60F-P manifold to cylinder head mounting package.
• OMC47-909314 exhaust manifold to cylinder head gasket.
• GR-1-6470L water cooled exhaust manifold (port side) to fit the 401 Buick. Includes all fittings, hose adaptors and primary water pump mounting provision.
• GR-1-6470R water cooled exhaust manifold (starboard side) to fit the 401 Buick. Includes all fittings, hose adaptors and primary water pump mounting provision.
• INT-1-5457L water cooled exhaust manifold (port side) for the Ford engine. Use with Barr risers and exhaust connectors.
• INT-1-5457R water cooled exhaust manifold (starboard) for the Ford engine. Use with Barr risers and exhaust connectors.
• INT-1-58L water cooled exhaust manifold (port) for the Ford engine. Use with Barr risers and connectors.
• INT-1-58R water cooled exhaust manifold (starboard) for the Ford engine. Use with Barr risers and connectors.
• INT-1-6268L water cooled exhaust manifold (port) for the Ford engine. Use with Barr risers and connectors.
• INT-1-6268R water cooled exhaust manfold (starboard for the Ford engine. Use with the Barr risers and connectors.
• 1-0022 end plate gasket (will fit both ends).

Composite kit picture shown is for reference only. See list of included parts above in the description.

Complete Barr Marine exhaust kit for the Chevy Small Block V8 (end discharge log style). Everything listed below is included in this kit, so the complete exhaust setup can be ordered under one part number.

Kit includes:

• (1) OF-1-60L port and (1) OF-1-60R starboard Chevy Small Block V8 End Discharge Exhaust Manifolds. Water cooled end discharge manifold to fit the small block Chevrolet (1/2" N.P.T. cooling hose connections). All years.
• (2) 1-0001 Exhaust Adaptor for Size A End Plate 2 Inch Pipe. Adaptor for Barr manifold replacing size "A" end plate (2" pipe).
• (2) 20-0000 Swivel High Discharge Exhaust Riser 8-1/2 Inch 3 Inch Hose. Swivel-type high discharge exhaust riser; 8 1/2" riser protection. Use only with 2 7/8" to 3" I.D. exhaust hose. Barr exhaust risers and connectors can be swiveled inboard or outboard in the horizontal plane, and all except straight connectors can also be swiveled in the vertical plane.
• (2) 20-0002P Swivel Riser and Elbow Mounting Hardware Kit. Mounting hardware kit.

Fits these applications:

• Flagship V8 283, 327 and 350 C.I.D. (log style generic).
• OMC V8 283, 305, 307 and 350 C.I.D., Models 210, 215, 225, 235 and 245 H.P. (log style generic).

Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.''s are achieved after replacing an OEM manifold with Barr replacement parts.

• 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).

Compatible parts:

• 20-0031 swivel-type 90 degree exhaust elbow connector with internal water discharge. Accepts 2 1/2" to 3" I.D. exhaust hose.
• 20-0039 fully jacketed swivel-type exhaust riser; 7" riser protection. Requires (2) mounting hardware kits #20-0002P ((1) kit to mount riser to manifold and (1) kit to mount elbows #20-0034 or #20-0035 to riser).
• 20-0055 swivel-type 30 degree exhaust elbow connector; fully jacketed. Accepts 2 1/2" or 3" I.D. exhaust hose.
• 1-0019 end plate gasket (will fit both ends).
• CHV-47-0000 manifold to cylinder head gasket.
• OF-1-60F-P manifold to cylinder head mounting package.
• OMC47-909314 exhaust manifold to cylinder head gasket.
• GR-1-6470L water cooled exhaust manifold (port side) to fit the 401 Buick. Includes all fittings, hose adaptors and primary water pump mounting provision.
• GR-1-6470R water cooled exhaust manifold (starboard side) to fit the 401 Buick. Includes all fittings, hose adaptors and primary water pump mounting provision.
• INT-1-5457L water cooled exhaust manifold (port side) for the Ford engine. Use with Barr risers and exhaust connectors.
• INT-1-5457R water cooled exhaust manifold (starboard) for the Ford engine. Use with Barr risers and exhaust connectors.
• INT-1-58L water cooled exhaust manifold (port) for the Ford engine. Use with Barr risers and connectors.
• INT-1-58R water cooled exhaust manifold (starboard) for the Ford engine. Use with Barr risers and connectors.
• INT-1-6268L water cooled exhaust manifold (port) for the Ford engine. Use with Barr risers and connectors.
• INT-1-6268R water cooled exhaust manfold (starboard for the Ford engine. Use with the Barr risers and connectors.
• 1-0022 end plate gasket (will fit both ends).

Composite kit picture shown is for reference only. See list of included parts above in the description.

Complete Barr Marine exhaust kit for the Chevy Small Block V8 (end discharge log style). Everything listed below is included in this kit, so the complete exhaust setup can be ordered under one part number.

Kit includes:

• (1) OF-1-60L port and (1) OF-1-60R starboard Chevy Small Block V8 End Discharge Exhaust Manifolds. Water cooled end discharge manifold to fit the small block Chevrolet (1/2" N.P.T. cooling hose connections). All years.
• (2) 1-0001 Exhaust Adaptor for Size A End Plate 2 Inch Pipe. Adaptor for Barr manifold replacing size "A" end plate (2" pipe).
• (2) 20-0031 Swivel 90 Degree Exhaust Elbow 2-1/2 or 3 Inch Hose. Swivel-type 90 degree exhaust elbow connector with internal water discharge. Accepts 2 1/2" to 3" I.D. exhaust hose. Barr exhaust risers and connectors can be swiveled inboard or outboard in the horizontal plane, and all except straight connectors can also be swiveled in the vertical plane.
• (2) 20-0002P Swivel Riser and Elbow Mounting Hardware Kit. Mounting hardware kit.

Fits these applications:

• Flagship V8 283, 327 and 350 C.I.D. (log style generic).
• OMC V8 283, 305, 307 and 350 C.I.D., Models 210, 215, 225, 235 and 245 H.P. (log style generic).

Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.''s are achieved after replacing an OEM manifold with Barr replacement parts.

• 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).

Compatible parts:

• 20-0000 swivel-type high discharge exhaust riser; 8 1/2" riser protection. Requires (1) mounting hardware kit #20-0002P per riser.
• 20-0039 fully jacketed swivel-type exhaust riser; 7" riser protection. Requires (2) mounting hardware kits #20-0002P ((1) kit to mount riser to manifold and (1) kit to mount elbows #20-0034 or #20-0035 to riser).
• 20-0055 swivel-type 30 degree exhaust elbow connector; fully jacketed. Accepts 2 1/2" or 3" I.D. exhaust hose.
• 1-0019 end plate gasket (will fit both ends).
• CHV-47-0000 manifold to cylinder head gasket.
• OF-1-60F-P manifold to cylinder head mounting package.
• OMC47-909314 exhaust manifold to cylinder head gasket.
• BV6-1-75L water cooled end discharge port manifold to fit the Buick V6 engine (1/2" N.P.T. cooling connections). All years.
• BV6-1-75R water cooled end discharge starboard manifold to fit the Buick V6 engine (1/2" N.P.T. cooling connections). All years.
• GR-1-6470L water cooled exhaust manifold (port side) to fit the 401 Buick. Includes all fittings, hose adaptors and primary water pump mounting provision.
• GR-1-6470R water cooled exhaust manifold (starboard side) to fit the 401 Buick. Includes all fittings, hose adaptors and primary water pump mounting provision.
• INT-1-5457L water cooled exhaust manifold (port side) for the Ford engine. Use with Barr risers and exhaust connectors.
• INT-1-5457R water cooled exhaust manifold (starboard) for the Ford engine. Use with Barr risers and exhaust connectors.
• INT-1-58L water cooled exhaust manifold (port) for the Ford engine. Use with Barr risers and connectors.
• INT-1-58R water cooled exhaust manifold (starboard) for the Ford engine. Use with Barr risers and connectors.
• INT-1-6268L water cooled exhaust manifold (port) for the Ford engine. Use with Barr risers and connectors.
• INT-1-6268R water cooled exhaust manfold (starboard for the Ford engine. Use with the Barr risers and connectors.
• 1-0022 end plate gasket (will fit both ends).

Composite kit picture shown is for reference only. See list of included parts above in the description.

Manifold mounting package (includes bolts and pipe plugs).

Fits these applications:

• Chris-Craft V8 283, 302, 305, 307, 327 and 350 C.I.D., all models (center riser generic).
• Crusader V8 283, 302, 305, 307, 327 and 350 C.I.D., all models (center riser generic).
• Flagship V8 283, 327 and 350 C.I.D., all models (center riser generic).
• Indmar V8 283, 305, 307, 327 and 350 C.I.D., all inboard models (center riser generic).
• MerCruiser V8 283, 302, 305, 307, 327 and 350 C.I.D., all models (center riser generic).
• OMC V8 283, 302, 305, 307 and 350 C.I.D., all models (center riser generic).
• Volvo V8 307 and 350 C.I.D., all models (center riser generic).

Compatible parts:

• CHV-1-83 water cooled center discharge manifold to fit the small block GM engine (3/4" N.P.T. cooling hose connections). All years.
• 20-0082 water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 3" I.D. exhaust hose.
• 20-0100 water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 4" I.D. exhaust hose.
• 20-0102 water cooled center discharge riser (3/4" N.P.T. cooling hose connection).
• 20-0097 3" spacer block (complete with mounting hardware, gasket and 3/4" pipe plug). Capable of stacking.

Manufactured by Barr Marine. Part number CHV-1-83P.

Manifold to cylinder head gasket.

Replaces Marine Power 0994-600, Osco CV-GH, Mallory 9-65303, HGE 0000 and Sierra 18-2949.

Fits these applications:

• Chevrolet small block V8 283, 302, 305, 307, 327 and 350 C.I.D., all models (aluminum center riser generic).
• Chris-Craft V8 283, 302, 305, 307, 327 and 350 C.I.D., all models (log style direct replacement).
• Chris-Craft V8 283, 302, 305, 307, 327 and 350 C.I.D., all models (center riser generic).
• Crusader V8 283, 302, 305, 307, 327 and 350 C.I.D., all models (center riser generic).
• Crusader V8 283, 302, 305, 307, 327 and 350 C.I.D., all models (direct replacement).
• Crusader V8 283, 305, 307, 327 and 350 C.I.D. (center riser direct replacement).
• Flagship V8 283, 327 and 350 C.I.D., all models (center riser generic).
• Flagship V8 283, 327 and 350 C.I.D. (log style generic).
• Indmar V8 283, 305, 307, 327 and 350 C.I.D., all inboard models (center riser generic).
• MerCruiser V8 5.0L, 5.7L and 6.2L "dry joint" exhaust, all carbureted, MPI, inboard, Alpha and Bravo stern drive models (center riser direct replacement).
• MerCruiser V8 283, 302, 305, 307, 327 and 350 C.I.D., all models (center riser generic).
• OMC V8 283, 302, 305, 307 and 350 C.I.D., all models (center riser generic).
• Volvo V8 307 and 350 C.I.D., all models (center riser generic).

Also for use with the Barr Center Riser generic aluminum manifold/riser system.

• Always use the correct riser gasket for your application and refer to the correct guide to install gaskets correctly. Improperly installed gaskets, leaks or damage caused by either are not covered by the Barr Marine warranty. Gaskets are not subject to exchange or refund under any circumstances.

Compatible parts:

• CC-1-07686 direct replacement water cooled manifold.
• CHV-1-83 water cooled center discharge manifold to fit the small block GM engine (3/4" N.P.T. cooling hose connections). All years.
• CHV-1-92 water cooled center discharge manifold to fit the small block GM engine (3/4" N.P.T. cooling hose connections). All years.
• CR-1-97752 direct replacement starboard side manifold.
• CR-1-97753 direct replacement port side manifold.
• CR-1-98243 direct replacement water cooled exhaust manifold.
• MC-1-865735 direct replacement exhaust manifold.
• OF-1-60L water cooled end discharge port manifold to fit the small block Chevrolet (1/2" N.P.T. cooling hose connections). All years.
• OF-1-60R water cooled end discharge starboard manifold to fit the small block Chevrolet (1/2" N.P.T. cooling hose connections). All years.
• 20-0000 swivel-type high discharge exhaust riser; 8 1/2" riser protection. Requires (1) mounting hardware kit #20-0002P per riser.
• 20-0031 swivel-type 90 degree exhaust elbow connector with internal water discharge. Accepts 2 1/2" to 3" I.D. exhaust hose.
• 20-0039 fully jacketed swivel-type exhaust riser; 7" riser protection. Requires (2) mounting hardware kits #20-0002P ((1) kit to mount riser to manifold and (1) kit to mount elbows #20-0034 or #20-0035 to riser).
• 20-0055 swivel-type 30 degree exhaust elbow connector; fully jacketed. Accepts 2 1/2" or 3" I.D. exhaust hose.
• 20-0082 water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 3" I.D. exhaust hose.
• 20-0100 water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 4" I.D. exhaust hose.
• 20-0102 water cooled center discharge riser (3/4" N.P.T. cooling hose connection).
• 20-0107 water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 4" I.D. exhaust hose.
• 20-0108 water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 3" I.D. exhaust hose.
• CC-20-07605 direct replacement exhaust elbow.
• CC-20-08288 direct replacement port side riser.
• CC-20-08289 direct replacement starboard side riser.
• CR-20-29015 direct replacement exhaust riser (high profile).
• CR-20-96560 direct replacement exhaust elbow assembly, 3" I.D. exhaust hose.
• CR-20-97386 90 degree swivel elbow.
• CR-20-97387 elbow, lower swivel with 3" outlet.
• CR-20-97624 elbow, lower swivel with 4" outlet.
• CR-20-97924 direct replacement exhaust elbow assembly, 4" I.D. exhaust hose.
• CR-20-98068 direct replacement exhaust elbow assembly, 3" I.D. exhaust hose. For use without Crusader spacer part # 97295.
• MC-20-864309 direct replacement exhaust riser/elbow. Riser will replace the equivalent part number on 4.3L Models as well.
• MC-20-864591 direct t replacement exhaust riser/ elbow.
• 20-0097 3" spacer block (complete with mounting hardware, gasket and 3/4" pipe plug). Capable of stacking.
• CR-20-97169 6" riser extension.
• CR-20-97772 4" riser l extension.
• CR-20-98128 manifold to riser 3" spacer block (single).

Manufactured by Barr Marine. Part number CHV-47-0000.