Barr Marine

Complete Barr Marine exhaust kit for the Interceptor V8 221-289 (log style). Everything listed below is included in this kit, so the complete exhaust setup can be ordered under one part number.

Kit includes:

• (1) INT-1-6268L port and (1) INT-1-6268R starboard Interceptor Ford V8 221-289 Exhaust Manifolds. Water cooled exhaust manifold for the Ford engine. The original Interceptor exhaust connectors are not applicable to the Barr manifolds. Use with Barr risers and connectors.
• (2) 20-0000 Swivel High Discharge Exhaust Riser 8-1/2 Inch 3 Inch Hose. Swivel-type high discharge exhaust riser; 8 1/2" riser protection. Use only with 2 7/8" to 3" I.D. exhaust hose. Barr exhaust risers and connectors can be swiveled inboard or outboard in the horizontal plane, and all except straight connectors can also be swiveled in the vertical plane.
• (2) 20-0002P Swivel Riser and Elbow Mounting Hardware Kit. Mounting hardware kit.

Fits Interceptor V8 221, 260 and 289 C.I.D., models 120, 140, 165, 190, 200 and 210 H.P. (log style generic).

Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.''s are achieved after replacing an OEM manifold with Barr replacement parts.

• 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).

Compatible parts:

• 20-0031 swivel-type 90 degree exhaust elbow connector with internal water discharge. Accepts 2 1/2" to 3" I.D. exhaust hose.
• 20-0039 fully jacketed swivel-type exhaust riser; 7" riser protection. Requires (2) mounting hardware kits #20-0002P ((1) kit to mount riser to manifold and (1) kit to mount elbows #20-0034 or #20-0035 to riser).
• 20-0055 swivel-type 30 degree exhaust elbow connector; fully jacketed. Accepts 2 1/2" or 3" I.D. exhaust hose.
• 1-0022 end plate gasket (will fit both ends).
• GR-1-6470L water cooled exhaust manifold (port side) to fit the 401 Buick. Includes all fittings, hose adaptors and primary water pump mounting provision.
• GR-1-6470R water cooled exhaust manifold (starboard side) to fit the 401 Buick. Includes all fittings, hose adaptors and primary water pump mounting provision.
• INT-1-5457L water cooled exhaust manifold (port side) for the Ford engine. Use with Barr risers and exhaust connectors.
• INT-1-5457R water cooled exhaust manifold (starboard) for the Ford engine. Use with Barr risers and exhaust connectors.
• INT-1-58L water cooled exhaust manifold (port) for the Ford engine. Use with Barr risers and connectors.
• INT-1-58R water cooled exhaust manifold (starboard) for the Ford engine. Use with Barr risers and connectors.
• OF-1-60L water cooled end discharge port manifold to fit the small block Chevrolet (1/2" N.P.T. cooling hose connections). All years.
• OF-1-60R water cooled end discharge starboard manifold to fit the small block Chevrolet (1/2" N.P.T. cooling hose connections). All years.
• 1-0019 end plate gasket (will fit both ends).
• CHV-47-0000 manifold to cylinder head gasket.
• OF-1-60F-P manifold to cylinder head mounting package.

Composite kit picture shown is for reference only. See list of included parts above in the description.

Complete Barr Marine exhaust kit for the Interceptor V8 221-289 (log style). Everything listed below is included in this kit, so the complete exhaust setup can be ordered under one part number.

Kit includes:

• (1) INT-1-6268L port and (1) INT-1-6268R starboard Interceptor Ford V8 221-289 Exhaust Manifolds. Water cooled exhaust manifold for the Ford engine. The original Interceptor exhaust connectors are not applicable to the Barr manifolds. Use with Barr risers and connectors.
• (2) 20-0031 Swivel 90 Degree Exhaust Elbow 2-1/2 or 3 Inch Hose. Swivel-type 90 degree exhaust elbow connector with internal water discharge. Accepts 2 1/2" to 3" I.D. exhaust hose. Barr exhaust risers and connectors can be swiveled inboard or outboard in the horizontal plane, and all except straight connectors can also be swiveled in the vertical plane.
• (2) 20-0002P Swivel Riser and Elbow Mounting Hardware Kit. Mounting hardware kit.

Fits Interceptor V8 221, 260 and 289 C.I.D., models 120, 140, 165, 190, 200 and 210 H.P. (log style generic).

Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.''s are achieved after replacing an OEM manifold with Barr replacement parts.

• 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).

Compatible parts:

• 20-0000 swivel-type high discharge exhaust riser; 8 1/2" riser protection. Requires (1) mounting hardware kit #20-0002P per riser.
• 20-0039 fully jacketed swivel-type exhaust riser; 7" riser protection. Requires (2) mounting hardware kits #20-0002P ((1) kit to mount riser to manifold and (1) kit to mount elbows #20-0034 or #20-0035 to riser).
• 20-0055 swivel-type 30 degree exhaust elbow connector; fully jacketed. Accepts 2 1/2" or 3" I.D. exhaust hose.
• 1-0022 end plate gasket (will fit both ends).
• BV6-1-75L water cooled end discharge port manifold to fit the Buick V6 engine (1/2" N.P.T. cooling connections). All years.
• BV6-1-75R water cooled end discharge starboard manifold to fit the Buick V6 engine (1/2" N.P.T. cooling connections). All years.
• GR-1-6470L water cooled exhaust manifold (port side) to fit the 401 Buick. Includes all fittings, hose adaptors and primary water pump mounting provision.
• GR-1-6470R water cooled exhaust manifold (starboard side) to fit the 401 Buick. Includes all fittings, hose adaptors and primary water pump mounting provision.
• INT-1-5457L water cooled exhaust manifold (port side) for the Ford engine. Use with Barr risers and exhaust connectors.
• INT-1-5457R water cooled exhaust manifold (starboard) for the Ford engine. Use with Barr risers and exhaust connectors.
• INT-1-58L water cooled exhaust manifold (port) for the Ford engine. Use with Barr risers and connectors.
• INT-1-58R water cooled exhaust manifold (starboard) for the Ford engine. Use with Barr risers and connectors.
• OF-1-60L water cooled end discharge port manifold to fit the small block Chevrolet (1/2" N.P.T. cooling hose connections). All years.
• OF-1-60R water cooled end discharge starboard manifold to fit the small block Chevrolet (1/2" N.P.T. cooling hose connections). All years.
• 1-0019 end plate gasket (will fit both ends).
• CHV-47-0000 manifold to cylinder head gasket.
• OF-1-60F-P manifold to cylinder head mounting package.
• OMC47-909314 exhaust manifold to cylinder head gasket.

Composite kit picture shown is for reference only. See list of included parts above in the description.

Complete Barr Marine exhaust kit for the Interceptor V8 239-312 (log style). Everything listed below is included in this kit, so the complete exhaust setup can be ordered under one part number.

Kit includes:

• (1) INT-1-5457L port and (1) INT-1-5457R starboard Interceptor Ford V8 239-312 Exhaust Manifolds. Water cooled exhaust manifold for the Ford engine. The original Interceptor exhaust connectors are not applicable to the Barr manifolds. Use with Barr risers and exhaust connectors.
• (2) 20-0055 Jacketed Swivel 30 Degree Exhaust Elbow. Swivel-type 30 degree exhaust elbow connector; fully jacketed. Accepts 2 1/2" or 3" I.D. exhaust hose. Barr exhaust risers and connectors can be swiveled inboard or outboard in the horizontal plane, and all except straight connectors can also be swiveled in the vertical plane.
• (2) 20-0002P Swivel Riser and Elbow Mounting Hardware Kit. Mounting hardware kit.

Fits Interceptor V8 239, 256, 272, 292 and 312 C.I.D., models 125, 135, 150, 170, 185 and 215 H.P. (log style generic).

Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.''s are achieved after replacing an OEM manifold with Barr replacement parts.

• 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).

Compatible parts:

• 20-0000 swivel-type high discharge exhaust riser; 8 1/2" riser protection. Requires (1) mounting hardware kit #20-0002P per riser.
• 20-0031 swivel-type 90 degree exhaust elbow connector with internal water discharge. Accepts 2 1/2" to 3" I.D. exhaust hose.
• 20-0039 fully jacketed swivel-type exhaust riser; 7" riser protection. Requires (2) mounting hardware kits #20-0002P ((1) kit to mount riser to manifold and (1) kit to mount elbows #20-0034 or #20-0035 to riser).
• 1-0022 end plate gasket (will fit both ends).
• GR-1-6470L water cooled exhaust manifold (port side) to fit the 401 Buick. Includes all fittings, hose adaptors and primary water pump mounting provision.
• GR-1-6470R water cooled exhaust manifold (starboard side) to fit the 401 Buick. Includes all fittings, hose adaptors and primary water pump mounting provision.
• INT-1-58L water cooled exhaust manifold (port) for the Ford engine. Use with Barr risers and connectors.
• INT-1-58R water cooled exhaust manifold (starboard) for the Ford engine. Use with Barr risers and connectors.
• INT-1-6268L water cooled exhaust manifold (port) for the Ford engine. Use with Barr risers and connectors.
• INT-1-6268R water cooled exhaust manfold (starboard for the Ford engine. Use with the Barr risers and connectors.
• OF-1-60L water cooled end discharge port manifold to fit the small block Chevrolet (1/2" N.P.T. cooling hose connections). All years.
• OF-1-60R water cooled end discharge starboard manifold to fit the small block Chevrolet (1/2" N.P.T. cooling hose connections). All years.
• 1-0019 end plate gasket (will fit both ends).
• CHV-47-0000 manifold to cylinder head gasket.
• OF-1-60F-P manifold to cylinder head mounting package.
• OMC47-909314 exhaust manifold to cylinder head gasket.

Composite kit picture shown is for reference only. See list of included parts above in the description.

Complete Barr Marine exhaust kit for the Interceptor V8 239-312 (log style). Everything listed below is included in this kit, so the complete exhaust setup can be ordered under one part number.

Kit includes:

• (1) INT-1-5457L port and (1) INT-1-5457R starboard Interceptor Ford V8 239-312 Exhaust Manifolds. Water cooled exhaust manifold for the Ford engine. The original Interceptor exhaust connectors are not applicable to the Barr manifolds. Use with Barr risers and exhaust connectors.
• (2) 20-0039 Fully Jacketed Swivel Exhaust Riser 7 Inch Riser Protection. Fully jacketed swivel-type exhaust riser; 7" riser protection. Barr exhaust risers and connectors can be swiveled inboard or outboard in the horizontal plane, and all except straight connectors can also be swiveled in the vertical plane.
• (2) 20-0035 Exhaust Connector 2-1/2 Inch Hose for 20-0039 Riser. Exhaust connector #20-0035 (for 2 1/2" I.D. exhaust hose) or exhaust connector #20-0034 (for 3" I.D. exhaust hose). For 2-3/8" or 2-1/2" I.D. exhaust hose.
• (4) 20-0002P Swivel Riser and Elbow Mounting Hardware Kit. Mounting hardware kit.

Fits Interceptor V8 239, 256, 272, 292 and 312 C.I.D., models 125, 135, 150, 170, 185 and 215 H.P. (log style generic).

Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.''s are achieved after replacing an OEM manifold with Barr replacement parts.

• 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).

Compatible parts:

• 20-0000 swivel-type high discharge exhaust riser; 8 1/2" riser protection. Requires (1) mounting hardware kit #20-0002P per riser.
• 20-0031 swivel-type 90 degree exhaust elbow connector with internal water discharge. Accepts 2 1/2" to 3" I.D. exhaust hose.
• 20-0055 swivel-type 30 degree exhaust elbow connector; fully jacketed. Accepts 2 1/2" or 3" I.D. exhaust hose.
• 1-0022 end plate gasket (will fit both ends).
• GR-1-6470L water cooled exhaust manifold (port side) to fit the 401 Buick. Includes all fittings, hose adaptors and primary water pump mounting provision.
• GR-1-6470R water cooled exhaust manifold (starboard side) to fit the 401 Buick. Includes all fittings, hose adaptors and primary water pump mounting provision.
• INT-1-58L water cooled exhaust manifold (port) for the Ford engine. Use with Barr risers and connectors.
• INT-1-58R water cooled exhaust manifold (starboard) for the Ford engine. Use with Barr risers and connectors.
• INT-1-6268L water cooled exhaust manifold (port) for the Ford engine. Use with Barr risers and connectors.
• INT-1-6268R water cooled exhaust manfold (starboard for the Ford engine. Use with the Barr risers and connectors.
• OF-1-60L water cooled end discharge port manifold to fit the small block Chevrolet (1/2" N.P.T. cooling hose connections). All years.
• OF-1-60R water cooled end discharge starboard manifold to fit the small block Chevrolet (1/2" N.P.T. cooling hose connections). All years.
• 1-0019 end plate gasket (will fit both ends).
• CHV-47-0000 manifold to cylinder head gasket.
• OF-1-60F-P manifold to cylinder head mounting package.

Composite kit picture shown is for reference only. See list of included parts above in the description.

Complete Barr Marine exhaust kit for the Interceptor V8 239-312 (log style). Everything listed below is included in this kit, so the complete exhaust setup can be ordered under one part number.

Kit includes:

• (1) INT-1-5457L port and (1) INT-1-5457R starboard Interceptor Ford V8 239-312 Exhaust Manifolds. Water cooled exhaust manifold for the Ford engine. The original Interceptor exhaust connectors are not applicable to the Barr manifolds. Use with Barr risers and exhaust connectors.
• (2) 20-0039 Fully Jacketed Swivel Exhaust Riser 7 Inch Riser Protection. Fully jacketed swivel-type exhaust riser; 7" riser protection. Barr exhaust risers and connectors can be swiveled inboard or outboard in the horizontal plane, and all except straight connectors can also be swiveled in the vertical plane.
• (2) 20-0034 Exhaust Connector 3 Inch Hose for 20-0039 Riser. Exhaust connector #20-0035 (for 2 1/2" I.D. exhaust hose) or exhaust connector #20-0034 (for 3" I.D. exhaust hose). For 2-7/8" or 3" I.D. exhaust hose.
• (4) 20-0002P Swivel Riser and Elbow Mounting Hardware Kit. Mounting hardware kit.

Fits Interceptor V8 239, 256, 272, 292 and 312 C.I.D., models 125, 135, 150, 170, 185 and 215 H.P. (log style generic).

Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.''s are achieved after replacing an OEM manifold with Barr replacement parts.

• 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).

Compatible parts:

• 20-0000 swivel-type high discharge exhaust riser; 8 1/2" riser protection. Requires (1) mounting hardware kit #20-0002P per riser.
• 20-0031 swivel-type 90 degree exhaust elbow connector with internal water discharge. Accepts 2 1/2" to 3" I.D. exhaust hose.
• 20-0055 swivel-type 30 degree exhaust elbow connector; fully jacketed. Accepts 2 1/2" or 3" I.D. exhaust hose.
• 1-0022 end plate gasket (will fit both ends).
• GR-1-6470L water cooled exhaust manifold (port side) to fit the 401 Buick. Includes all fittings, hose adaptors and primary water pump mounting provision.
• GR-1-6470R water cooled exhaust manifold (starboard side) to fit the 401 Buick. Includes all fittings, hose adaptors and primary water pump mounting provision.
• INT-1-58L water cooled exhaust manifold (port) for the Ford engine. Use with Barr risers and connectors.
• INT-1-58R water cooled exhaust manifold (starboard) for the Ford engine. Use with Barr risers and connectors.
• INT-1-6268L water cooled exhaust manifold (port) for the Ford engine. Use with Barr risers and connectors.
• INT-1-6268R water cooled exhaust manfold (starboard for the Ford engine. Use with the Barr risers and connectors.
• OF-1-60L water cooled end discharge port manifold to fit the small block Chevrolet (1/2" N.P.T. cooling hose connections). All years.
• OF-1-60R water cooled end discharge starboard manifold to fit the small block Chevrolet (1/2" N.P.T. cooling hose connections). All years.
• 1-0019 end plate gasket (will fit both ends).
• CHV-47-0000 manifold to cylinder head gasket.
• OF-1-60F-P manifold to cylinder head mounting package.

Composite kit picture shown is for reference only. See list of included parts above in the description.

Complete Barr Marine exhaust kit for the Interceptor V8 239-312 (log style). Everything listed below is included in this kit, so the complete exhaust setup can be ordered under one part number.

Kit includes:

• (1) INT-1-5457L port and (1) INT-1-5457R starboard Interceptor Ford V8 239-312 Exhaust Manifolds. Water cooled exhaust manifold for the Ford engine. The original Interceptor exhaust connectors are not applicable to the Barr manifolds. Use with Barr risers and exhaust connectors.
• (2) 20-0000 Swivel High Discharge Exhaust Riser 8-1/2 Inch 3 Inch Hose. Swivel-type high discharge exhaust riser; 8 1/2" riser protection. Use only with 2 7/8" to 3" I.D. exhaust hose. Barr exhaust risers and connectors can be swiveled inboard or outboard in the horizontal plane, and all except straight connectors can also be swiveled in the vertical plane.
• (2) 20-0002P Swivel Riser and Elbow Mounting Hardware Kit. Mounting hardware kit.

Fits Interceptor V8 239, 256, 272, 292 and 312 C.I.D., models 125, 135, 150, 170, 185 and 215 H.P. (log style generic).

Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.''s are achieved after replacing an OEM manifold with Barr replacement parts.

• 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).

Compatible parts:

• 20-0031 swivel-type 90 degree exhaust elbow connector with internal water discharge. Accepts 2 1/2" to 3" I.D. exhaust hose.
• 20-0039 fully jacketed swivel-type exhaust riser; 7" riser protection. Requires (2) mounting hardware kits #20-0002P ((1) kit to mount riser to manifold and (1) kit to mount elbows #20-0034 or #20-0035 to riser).
• 20-0055 swivel-type 30 degree exhaust elbow connector; fully jacketed. Accepts 2 1/2" or 3" I.D. exhaust hose.
• 1-0022 end plate gasket (will fit both ends).
• GR-1-6470L water cooled exhaust manifold (port side) to fit the 401 Buick. Includes all fittings, hose adaptors and primary water pump mounting provision.
• GR-1-6470R water cooled exhaust manifold (starboard side) to fit the 401 Buick. Includes all fittings, hose adaptors and primary water pump mounting provision.
• INT-1-58L water cooled exhaust manifold (port) for the Ford engine. Use with Barr risers and connectors.
• INT-1-58R water cooled exhaust manifold (starboard) for the Ford engine. Use with Barr risers and connectors.
• INT-1-6268L water cooled exhaust manifold (port) for the Ford engine. Use with Barr risers and connectors.
• INT-1-6268R water cooled exhaust manfold (starboard for the Ford engine. Use with the Barr risers and connectors.
• OF-1-60L water cooled end discharge port manifold to fit the small block Chevrolet (1/2" N.P.T. cooling hose connections). All years.
• OF-1-60R water cooled end discharge starboard manifold to fit the small block Chevrolet (1/2" N.P.T. cooling hose connections). All years.
• 1-0019 end plate gasket (will fit both ends).
• CHV-47-0000 manifold to cylinder head gasket.
• OF-1-60F-P manifold to cylinder head mounting package.

Composite kit picture shown is for reference only. See list of included parts above in the description.

Complete Barr Marine exhaust kit for the Interceptor V8 239-312 (log style). Everything listed below is included in this kit, so the complete exhaust setup can be ordered under one part number.

Kit includes:

• (1) INT-1-5457L port and (1) INT-1-5457R starboard Interceptor Ford V8 239-312 Exhaust Manifolds. Water cooled exhaust manifold for the Ford engine. The original Interceptor exhaust connectors are not applicable to the Barr manifolds. Use with Barr risers and exhaust connectors.
• (2) 20-0031 Swivel 90 Degree Exhaust Elbow 2-1/2 or 3 Inch Hose. Swivel-type 90 degree exhaust elbow connector with internal water discharge. Accepts 2 1/2" to 3" I.D. exhaust hose. Barr exhaust risers and connectors can be swiveled inboard or outboard in the horizontal plane, and all except straight connectors can also be swiveled in the vertical plane.
• (2) 20-0002P Swivel Riser and Elbow Mounting Hardware Kit. Mounting hardware kit.

Fits Interceptor V8 239, 256, 272, 292 and 312 C.I.D., models 125, 135, 150, 170, 185 and 215 H.P. (log style generic).

Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.''s are achieved after replacing an OEM manifold with Barr replacement parts.

• 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).

Compatible parts:

• 20-0000 swivel-type high discharge exhaust riser; 8 1/2" riser protection. Requires (1) mounting hardware kit #20-0002P per riser.
• 20-0039 fully jacketed swivel-type exhaust riser; 7" riser protection. Requires (2) mounting hardware kits #20-0002P ((1) kit to mount riser to manifold and (1) kit to mount elbows #20-0034 or #20-0035 to riser).
• 20-0055 swivel-type 30 degree exhaust elbow connector; fully jacketed. Accepts 2 1/2" or 3" I.D. exhaust hose.
• 1-0022 end plate gasket (will fit both ends).
• BV6-1-75L water cooled end discharge port manifold to fit the Buick V6 engine (1/2" N.P.T. cooling connections). All years.
• BV6-1-75R water cooled end discharge starboard manifold to fit the Buick V6 engine (1/2" N.P.T. cooling connections). All years.
• GR-1-6470L water cooled exhaust manifold (port side) to fit the 401 Buick. Includes all fittings, hose adaptors and primary water pump mounting provision.
• GR-1-6470R water cooled exhaust manifold (starboard side) to fit the 401 Buick. Includes all fittings, hose adaptors and primary water pump mounting provision.
• INT-1-58L water cooled exhaust manifold (port) for the Ford engine. Use with Barr risers and connectors.
• INT-1-58R water cooled exhaust manifold (starboard) for the Ford engine. Use with Barr risers and connectors.
• INT-1-6268L water cooled exhaust manifold (port) for the Ford engine. Use with Barr risers and connectors.
• INT-1-6268R water cooled exhaust manfold (starboard for the Ford engine. Use with the Barr risers and connectors.
• OF-1-60L water cooled end discharge port manifold to fit the small block Chevrolet (1/2" N.P.T. cooling hose connections). All years.
• OF-1-60R water cooled end discharge starboard manifold to fit the small block Chevrolet (1/2" N.P.T. cooling hose connections). All years.
• 1-0019 end plate gasket (will fit both ends).
• CHV-47-0000 manifold to cylinder head gasket.
• OF-1-60F-P manifold to cylinder head mounting package.
• OMC47-909314 exhaust manifold to cylinder head gasket.

Composite kit picture shown is for reference only. See list of included parts above in the description.

Complete Barr Marine exhaust kit for the Interceptor V8 352-427 (log style). Everything listed below is included in this kit, so the complete exhaust setup can be ordered under one part number.

Kit includes:

• (1) INT-1-58L port and (1) INT-1-58R starboard Interceptor Ford V8 352-427 Exhaust Manifolds. Water cooled exhaust manifold for the Ford engine. The original Interceptor exhaust connectors are not applicable to the Barr manifolds. Use with Barr risers and connectors.
• (2) 20-0055 Jacketed Swivel 30 Degree Exhaust Elbow. Swivel-type 30 degree exhaust elbow connector; fully jacketed. Accepts 2 1/2" or 3" I.D. exhaust hose. Barr exhaust risers and connectors can be swiveled inboard or outboard in the horizontal plane, and all except straight connectors can also be swiveled in the vertical plane.
• (2) 20-0002P Swivel Riser and Elbow Mounting Hardware Kit. Mounting hardware kit.

Fits Interceptor V8 352, 390 and 427 C.I.D., models 240, 250, 260, 285 and 300 H.P. (log style generic).

Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.''s are achieved after replacing an OEM manifold with Barr replacement parts.

• 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).

Compatible parts:

• 20-0000 swivel-type high discharge exhaust riser; 8 1/2" riser protection. Requires (1) mounting hardware kit #20-0002P per riser.
• 20-0031 swivel-type 90 degree exhaust elbow connector with internal water discharge. Accepts 2 1/2" to 3" I.D. exhaust hose.
• 20-0039 fully jacketed swivel-type exhaust riser; 7" riser protection. Requires (2) mounting hardware kits #20-0002P ((1) kit to mount riser to manifold and (1) kit to mount elbows #20-0034 or #20-0035 to riser).
• 1-0019 end plate gasket (will fit both ends).
• GR-1-6470L water cooled exhaust manifold (port side) to fit the 401 Buick. Includes all fittings, hose adaptors and primary water pump mounting provision.
• GR-1-6470R water cooled exhaust manifold (starboard side) to fit the 401 Buick. Includes all fittings, hose adaptors and primary water pump mounting provision.
• INT-1-5457L water cooled exhaust manifold (port side) for the Ford engine. Use with Barr risers and exhaust connectors.
• INT-1-5457R water cooled exhaust manifold (starboard) for the Ford engine. Use with Barr risers and exhaust connectors.
• INT-1-6268L water cooled exhaust manifold (port) for the Ford engine. Use with Barr risers and connectors.
• INT-1-6268R water cooled exhaust manfold (starboard for the Ford engine. Use with the Barr risers and connectors.
• OF-1-60L water cooled end discharge port manifold to fit the small block Chevrolet (1/2" N.P.T. cooling hose connections). All years.
• OF-1-60R water cooled end discharge starboard manifold to fit the small block Chevrolet (1/2" N.P.T. cooling hose connections). All years.
• 1-0022 end plate gasket (will fit both ends).
• CHV-47-0000 manifold to cylinder head gasket.
• OF-1-60F-P manifold to cylinder head mounting package.
• OMC47-909314 exhaust manifold to cylinder head gasket.

Composite kit picture shown is for reference only. See list of included parts above in the description.

Complete Barr Marine exhaust kit for the Interceptor V8 352-427 (log style). Everything listed below is included in this kit, so the complete exhaust setup can be ordered under one part number.

Kit includes:

• (1) INT-1-58L port and (1) INT-1-58R starboard Interceptor Ford V8 352-427 Exhaust Manifolds. Water cooled exhaust manifold for the Ford engine. The original Interceptor exhaust connectors are not applicable to the Barr manifolds. Use with Barr risers and connectors.
• (2) 20-0039 Fully Jacketed Swivel Exhaust Riser 7 Inch Riser Protection. Fully jacketed swivel-type exhaust riser; 7" riser protection. Barr exhaust risers and connectors can be swiveled inboard or outboard in the horizontal plane, and all except straight connectors can also be swiveled in the vertical plane.
• (2) 20-0035 Exhaust Connector 2-1/2 Inch Hose for 20-0039 Riser. Exhaust connector #20-0035 (for 2 1/2" I.D. exhaust hose) or exhaust connector #20-0034 (for 3" I.D. exhaust hose). For 2-3/8" or 2-1/2" I.D. exhaust hose.
• (4) 20-0002P Swivel Riser and Elbow Mounting Hardware Kit. Mounting hardware kit.

Fits Interceptor V8 352, 390 and 427 C.I.D., models 240, 250, 260, 285 and 300 H.P. (log style generic).

Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.''s are achieved after replacing an OEM manifold with Barr replacement parts.

• 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).

Compatible parts:

• 20-0000 swivel-type high discharge exhaust riser; 8 1/2" riser protection. Requires (1) mounting hardware kit #20-0002P per riser.
• 20-0031 swivel-type 90 degree exhaust elbow connector with internal water discharge. Accepts 2 1/2" to 3" I.D. exhaust hose.
• 20-0055 swivel-type 30 degree exhaust elbow connector; fully jacketed. Accepts 2 1/2" or 3" I.D. exhaust hose.
• 1-0019 end plate gasket (will fit both ends).
• GR-1-6470L water cooled exhaust manifold (port side) to fit the 401 Buick. Includes all fittings, hose adaptors and primary water pump mounting provision.
• GR-1-6470R water cooled exhaust manifold (starboard side) to fit the 401 Buick. Includes all fittings, hose adaptors and primary water pump mounting provision.
• INT-1-5457L water cooled exhaust manifold (port side) for the Ford engine. Use with Barr risers and exhaust connectors.
• INT-1-5457R water cooled exhaust manifold (starboard) for the Ford engine. Use with Barr risers and exhaust connectors.
• INT-1-6268L water cooled exhaust manifold (port) for the Ford engine. Use with Barr risers and connectors.
• INT-1-6268R water cooled exhaust manfold (starboard for the Ford engine. Use with the Barr risers and connectors.
• OF-1-60L water cooled end discharge port manifold to fit the small block Chevrolet (1/2" N.P.T. cooling hose connections). All years.
• OF-1-60R water cooled end discharge starboard manifold to fit the small block Chevrolet (1/2" N.P.T. cooling hose connections). All years.
• 1-0022 end plate gasket (will fit both ends).
• CHV-47-0000 manifold to cylinder head gasket.
• OF-1-60F-P manifold to cylinder head mounting package.

Composite kit picture shown is for reference only. See list of included parts above in the description.

Complete Barr Marine exhaust kit for the Interceptor V8 352-427 (log style). Everything listed below is included in this kit, so the complete exhaust setup can be ordered under one part number.

Kit includes:

• (1) INT-1-58L port and (1) INT-1-58R starboard Interceptor Ford V8 352-427 Exhaust Manifolds. Water cooled exhaust manifold for the Ford engine. The original Interceptor exhaust connectors are not applicable to the Barr manifolds. Use with Barr risers and connectors.
• (2) 20-0039 Fully Jacketed Swivel Exhaust Riser 7 Inch Riser Protection. Fully jacketed swivel-type exhaust riser; 7" riser protection. Barr exhaust risers and connectors can be swiveled inboard or outboard in the horizontal plane, and all except straight connectors can also be swiveled in the vertical plane.
• (2) 20-0034 Exhaust Connector 3 Inch Hose for 20-0039 Riser. Exhaust connector #20-0035 (for 2 1/2" I.D. exhaust hose) or exhaust connector #20-0034 (for 3" I.D. exhaust hose). For 2-7/8" or 3" I.D. exhaust hose.
• (4) 20-0002P Swivel Riser and Elbow Mounting Hardware Kit. Mounting hardware kit.

Fits Interceptor V8 352, 390 and 427 C.I.D., models 240, 250, 260, 285 and 300 H.P. (log style generic).

Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.''s are achieved after replacing an OEM manifold with Barr replacement parts.

• 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).

Compatible parts:

• 20-0000 swivel-type high discharge exhaust riser; 8 1/2" riser protection. Requires (1) mounting hardware kit #20-0002P per riser.
• 20-0031 swivel-type 90 degree exhaust elbow connector with internal water discharge. Accepts 2 1/2" to 3" I.D. exhaust hose.
• 20-0055 swivel-type 30 degree exhaust elbow connector; fully jacketed. Accepts 2 1/2" or 3" I.D. exhaust hose.
• 1-0019 end plate gasket (will fit both ends).
• GR-1-6470L water cooled exhaust manifold (port side) to fit the 401 Buick. Includes all fittings, hose adaptors and primary water pump mounting provision.
• GR-1-6470R water cooled exhaust manifold (starboard side) to fit the 401 Buick. Includes all fittings, hose adaptors and primary water pump mounting provision.
• INT-1-5457L water cooled exhaust manifold (port side) for the Ford engine. Use with Barr risers and exhaust connectors.
• INT-1-5457R water cooled exhaust manifold (starboard) for the Ford engine. Use with Barr risers and exhaust connectors.
• INT-1-6268L water cooled exhaust manifold (port) for the Ford engine. Use with Barr risers and connectors.
• INT-1-6268R water cooled exhaust manfold (starboard for the Ford engine. Use with the Barr risers and connectors.
• OF-1-60L water cooled end discharge port manifold to fit the small block Chevrolet (1/2" N.P.T. cooling hose connections). All years.
• OF-1-60R water cooled end discharge starboard manifold to fit the small block Chevrolet (1/2" N.P.T. cooling hose connections). All years.
• 1-0022 end plate gasket (will fit both ends).
• CHV-47-0000 manifold to cylinder head gasket.
• OF-1-60F-P manifold to cylinder head mounting package.

Composite kit picture shown is for reference only. See list of included parts above in the description.

Complete Barr Marine exhaust kit for the Interceptor V8 352-427 (log style). Everything listed below is included in this kit, so the complete exhaust setup can be ordered under one part number.

Kit includes:

• (1) INT-1-58L port and (1) INT-1-58R starboard Interceptor Ford V8 352-427 Exhaust Manifolds. Water cooled exhaust manifold for the Ford engine. The original Interceptor exhaust connectors are not applicable to the Barr manifolds. Use with Barr risers and connectors.
• (2) 20-0000 Swivel High Discharge Exhaust Riser 8-1/2 Inch 3 Inch Hose. Swivel-type high discharge exhaust riser; 8 1/2" riser protection. Use only with 2 7/8" to 3" I.D. exhaust hose. Barr exhaust risers and connectors can be swiveled inboard or outboard in the horizontal plane, and all except straight connectors can also be swiveled in the vertical plane.
• (2) 20-0002P Swivel Riser and Elbow Mounting Hardware Kit. Mounting hardware kit.

Fits Interceptor V8 352, 390 and 427 C.I.D., models 240, 250, 260, 285 and 300 H.P. (log style generic).

Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.''s are achieved after replacing an OEM manifold with Barr replacement parts.

• 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).

Compatible parts:

• 20-0031 swivel-type 90 degree exhaust elbow connector with internal water discharge. Accepts 2 1/2" to 3" I.D. exhaust hose.
• 20-0039 fully jacketed swivel-type exhaust riser; 7" riser protection. Requires (2) mounting hardware kits #20-0002P ((1) kit to mount riser to manifold and (1) kit to mount elbows #20-0034 or #20-0035 to riser).
• 20-0055 swivel-type 30 degree exhaust elbow connector; fully jacketed. Accepts 2 1/2" or 3" I.D. exhaust hose.
• 1-0019 end plate gasket (will fit both ends).
• GR-1-6470L water cooled exhaust manifold (port side) to fit the 401 Buick. Includes all fittings, hose adaptors and primary water pump mounting provision.
• GR-1-6470R water cooled exhaust manifold (starboard side) to fit the 401 Buick. Includes all fittings, hose adaptors and primary water pump mounting provision.
• INT-1-5457L water cooled exhaust manifold (port side) for the Ford engine. Use with Barr risers and exhaust connectors.
• INT-1-5457R water cooled exhaust manifold (starboard) for the Ford engine. Use with Barr risers and exhaust connectors.
• INT-1-6268L water cooled exhaust manifold (port) for the Ford engine. Use with Barr risers and connectors.
• INT-1-6268R water cooled exhaust manfold (starboard for the Ford engine. Use with the Barr risers and connectors.
• OF-1-60L water cooled end discharge port manifold to fit the small block Chevrolet (1/2" N.P.T. cooling hose connections). All years.
• OF-1-60R water cooled end discharge starboard manifold to fit the small block Chevrolet (1/2" N.P.T. cooling hose connections). All years.
• 1-0022 end plate gasket (will fit both ends).
• CHV-47-0000 manifold to cylinder head gasket.
• OF-1-60F-P manifold to cylinder head mounting package.

Composite kit picture shown is for reference only. See list of included parts above in the description.

Complete Barr Marine exhaust kit for the Interceptor V8 352-427 (log style). Everything listed below is included in this kit, so the complete exhaust setup can be ordered under one part number.

Kit includes:

• (1) INT-1-58L port and (1) INT-1-58R starboard Interceptor Ford V8 352-427 Exhaust Manifolds. Water cooled exhaust manifold for the Ford engine. The original Interceptor exhaust connectors are not applicable to the Barr manifolds. Use with Barr risers and connectors.
• (2) 20-0031 Swivel 90 Degree Exhaust Elbow 2-1/2 or 3 Inch Hose. Swivel-type 90 degree exhaust elbow connector with internal water discharge. Accepts 2 1/2" to 3" I.D. exhaust hose. Barr exhaust risers and connectors can be swiveled inboard or outboard in the horizontal plane, and all except straight connectors can also be swiveled in the vertical plane.
• (2) 20-0002P Swivel Riser and Elbow Mounting Hardware Kit. Mounting hardware kit.

Fits Interceptor V8 352, 390 and 427 C.I.D., models 240, 250, 260, 285 and 300 H.P. (log style generic).

Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.''s are achieved after replacing an OEM manifold with Barr replacement parts.

• 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).

Compatible parts:

• 20-0000 swivel-type high discharge exhaust riser; 8 1/2" riser protection. Requires (1) mounting hardware kit #20-0002P per riser.
• 20-0039 fully jacketed swivel-type exhaust riser; 7" riser protection. Requires (2) mounting hardware kits #20-0002P ((1) kit to mount riser to manifold and (1) kit to mount elbows #20-0034 or #20-0035 to riser).
• 20-0055 swivel-type 30 degree exhaust elbow connector; fully jacketed. Accepts 2 1/2" or 3" I.D. exhaust hose.
• 1-0019 end plate gasket (will fit both ends).
• BV6-1-75L water cooled end discharge port manifold to fit the Buick V6 engine (1/2" N.P.T. cooling connections). All years.
• BV6-1-75R water cooled end discharge starboard manifold to fit the Buick V6 engine (1/2" N.P.T. cooling connections). All years.
• GR-1-6470L water cooled exhaust manifold (port side) to fit the 401 Buick. Includes all fittings, hose adaptors and primary water pump mounting provision.
• GR-1-6470R water cooled exhaust manifold (starboard side) to fit the 401 Buick. Includes all fittings, hose adaptors and primary water pump mounting provision.
• INT-1-5457L water cooled exhaust manifold (port side) for the Ford engine. Use with Barr risers and exhaust connectors.
• INT-1-5457R water cooled exhaust manifold (starboard) for the Ford engine. Use with Barr risers and exhaust connectors.
• INT-1-6268L water cooled exhaust manifold (port) for the Ford engine. Use with Barr risers and connectors.
• INT-1-6268R water cooled exhaust manfold (starboard for the Ford engine. Use with the Barr risers and connectors.
• OF-1-60L water cooled end discharge port manifold to fit the small block Chevrolet (1/2" N.P.T. cooling hose connections). All years.
• OF-1-60R water cooled end discharge starboard manifold to fit the small block Chevrolet (1/2" N.P.T. cooling hose connections). All years.
• 1-0022 end plate gasket (will fit both ends).
• CHV-47-0000 manifold to cylinder head gasket.
• OF-1-60F-P manifold to cylinder head mounting package.
• OMC47-909314 exhaust manifold to cylinder head gasket.

Composite kit picture shown is for reference only. See list of included parts above in the description.

Swivel-type 30 degree exhaust elbow connector; fully jacketed.

Fits these applications:

• Chris-Craft V8 283, 302, 305, 307, 327 and 350 C.I.D., all models (generic).
• Flagship V8 283, 327 and 350 C.I.D. (log style generic).
• Gray Marine V8 401 C.I.D. 280 H.P., all models (direct replacement).
• Interceptor V8 239, 256, 272, 292 and 312 C.I.D., models 125, 135, 150, 170, 185 and 215 H.P. (log style generic).
• Interceptor V8 221, 260 and 289 C.I.D., models 120, 140, 165, 190, 200 and 210 H.P. (log style generic).
• Interceptor V8 352, 390 and 427 C.I.D., models 240, 250, 260, 285 and 300 H.P. (log style generic).
• OMC V8 283, 305, 307 and 350 C.I.D., Models 210, 215, 225, 235 and 245 H.P. (log style generic).

Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.'s are achieved after replacing an OEM manifold with Barr replacement parts.

• Accepts 2 1/2" or 3" I.D. exhaust hose.
• Requires (1) mounting hardware kit #20-0002P per elbow.
• A header adaptor style end cap must be installed on the exhaust end of the log manifold in order to mount these risers or elbows. See the manifold end plate and gasket identification listing for the proper end plates for your application.
• Barr exhaust risers and connectors can be swiveled inboard or outboard in the horizontal plane, and all except straight connectors can also be swiveled in the vertical plane.
• 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).

Compatible parts:

• GR-1-6470L water cooled exhaust manifold (port side) to fit the 401 Buick. Includes all fittings, hose adaptors and primary water pump mounting provision.
• GR-1-6470R water cooled exhaust manifold (starboard side) to fit the 401 Buick. Includes all fittings, hose adaptors and primary water pump mounting provision.
• INT-1-5457L water cooled exhaust manifold (port side) for the Ford engine. Use with Barr risers and exhaust connectors.
• INT-1-5457R water cooled exhaust manifold (starboard) for the Ford engine. Use with Barr risers and exhaust connectors.
• INT-1-58L water cooled exhaust manifold (port) for the Ford engine. Use with Barr risers and connectors.
• INT-1-58R water cooled exhaust manifold (starboard) for the Ford engine. Use with Barr risers and connectors.
• INT-1-6268L water cooled exhaust manifold (port) for the Ford engine. Use with Barr risers and connectors.
• INT-1-6268R water cooled exhaust manfold (starboard for the Ford engine. Use with the Barr risers and connectors.
• OF-1-60L water cooled end discharge port manifold to fit the small block Chevrolet (1/2" N.P.T. cooling hose connections). All years.
• OF-1-60R water cooled end discharge starboard manifold to fit the small block Chevrolet (1/2" N.P.T. cooling hose connections). All years.
• 20-0000 swivel-type high discharge exhaust riser; 8 1/2" riser protection. Requires (1) mounting hardware kit #20-0002P per riser.
• 20-0031 swivel-type 90 degree exhaust elbow connector with internal water discharge. Accepts 2 1/2" to 3" I.D. exhaust hose.
• 20-0039 fully jacketed swivel-type exhaust riser; 7" riser protection. Requires (2) mounting hardware kits #20-0002P ((1) kit to mount riser to manifold and (1) kit to mount elbows #20-0034 or #20-0035 to riser).
• 1-0012L adaptor for Chris Craft V8 283 C.I.D. Manifolds prior to Models F, G, K and Q (three pass manifold system) left side. Requires Chris Craft adaptor part #16.20-07602 (port side).
• 1-0012R adaptor for Chris Craft V8 283 C.I.D. Manifolds prior to Models F, G, K and Q (three pass manifold system) right side. Requires Chris Craft adaptor part #16.20-07064 (starboard side).
• 1-0019 end plate gasket (will fit both ends).
• 1-0022 end plate gasket (will fit both ends).
• 20-0002P mounting hardware kit.
• CC-6-80 pressure relief valve adaptor package for use with Chris Craft direct replacement risers as needed.
• CC47-1650-05944 end cap gasket for all models except 283 C.I.D. with flywheel forward (Order (2) of the appropriate gaskets according to your requirements).
• CC47-1650-06022 end cap gasket for 283 C.I.D. with flywheel forward (Order (2) of the appropriate gaskets according to your requirements).
• CHV-47-0000 manifold to cylinder head gasket.
• OF-1-60F-P manifold to cylinder head mounting package.
• OMC47-909314 exhaust manifold to cylinder head gasket.

Manufactured by Barr Marine. Part number 20-0055.

Exhaust end cap for use with many Barr Marine log style manifolds.

Manufactured by Barr Marine. Part number 1-0036.

Front end plate for Barr Marine log style conversion manifolds.

Manufactured by Barr Marine. Part number 1-0042.

Header adapter used on many Barr Marine Log manifolds (smaller body manifolds). It is a Uses 20-0002P mounting kit for attaching exhaust components to 3.25" round header adapter.

Manufactured by Barr Marine. Part number 1-0000.

Threaded exhaust end plate for use with Barr Marine log style manifolds. 3 bolt pattern.

Manufactured by Barr Marine. Part number 1-0025.

Threaded exhaust end plate for use with Barr Marine log style manifolds. 4 bolt pattern.

Manufactured by Barr Marine. Part number 1-0080.

Manifold to carburetor adaptor mounting package.

Fits MerCruiser straight 6 cylinder Model 165 (log style direct replacement).

Compatible parts:

• MC-1-58759 direct replacement water cooled manifold to fit the 6 cyl. GM (Model 165) engine.
• MC-20-60426 direct replacement exhaust elbow riser (utilizes a stainless steel sleeve at the water/air mixing area).
• MC-20-76351 direct replacement exhaust elbow riser.
• MC-20-61851A3 manifold to riser 3" spacer (single block). Includes all mounting hardware, gaskets and drain plug.

Manufactured by Barr Marine. Part number MC-1-58764P.

Lower thermostat housing.

Replaces Osco MC553-SB and Sierra 18-1994.

Fits MerCruiser V8 Models 898R, 228R and 260R (center riser direct replacement).

Compatible parts:

• MC-1-87114 direct replacement water cooled exhaust manifold.
• MC-20-44354 direct replacement water cooled center discharge riser. Accepts 4" I.D. exhaust hose (8 degree angle).
• MC-20-98502 direct replacement water cooled center discharge riser. Accepts 3" I.D. exhaust hose (0 degree angle).
• MC-20-98504 direct replacement water cooled center discharge riser. Accepts 3" I.D. exhaust hose (15 degree angle).
• MC-20-93320A3 manifold to riser 3" spacer blocks (pair) with fastener and gasket package.
• MC-20-93322A3 manifold to riser 6" spacer blocks (pair) with fastener and gasket package.

Manufactured by Barr Marine. Part number MC-29-87290.