Barr Marine

Water cooled exhaust manifold for Ford V8 marine engine applications. Made of aluminum.

Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.'s are achieved after replacing an OEM manifold with Barr replacement parts.

• 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).

Manufactured by Barr Marine. Part number FM-1-92.

Complete Barr Marine exhaust kit for the Ford Small Block V8 (center riser). Everything listed below is included in this kit, so the complete exhaust setup can be ordered under one part number.

Kit includes:

• (2) FM-1-83 Ford Small Block V8 Center Riser Exhaust Manifold. Water cooled center discharge manifold to fit the small block Ford engine (3/4" N.P.T. cooling hose connections). All years. Includes all plugs, gaskets and mounting hardware to the cylinder head. Replaces Osco FL994, Mallory 9-40111, HGE 1-81, Sierra 18-1998-1 and GLM 56250.
• (2) 20-0082 Water Cooled Center Riser 3 Inch Exhaust Hose. Water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 3" I.D. exhaust hose. Includes plugs, gasket and mounting hardware to mount to the manifold. Replaces Marine Power 0992-000, Osco 992, Mallory 9-40100, HGE 0082, Sierra 18-1999 and GLM 56110.

Engine application: Ford V8 260, 289, 302 and 351 C.I.D. (Windsor models only, will not fit Cleveland engines).

Fits these applications:

• Crusader V8 302 and 351 C.I.D., all models (center riser generic).
• Indmar V8 302 and 351 C.I.D., all inboard models (center riser generic).
• Interceptor V8 221, 260, 289, 302 and 351 C.I.D., all models (center riser generic).
• MerCruiser V8 (Ford) 302 and 351 C.I.D., all models (center riser generic).
• OMC (Ford) V8 302 and 351 C.I.D., all models (center riser generic).
• PCM V8 302 and 351 C.I.D., all years (center riser generic).
• Waukesha V8 302 and 351 C.I.D., all years (center riser generic).

Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.''s are achieved after replacing an OEM manifold with Barr replacement parts.

• 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).

Compatible parts:

• 20-0100 water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 4" I.D. exhaust hose.
• 20-0102 water cooled center discharge riser (3/4" N.P.T. cooling hose connection).
• 20-0097 3" spacer block (complete with mounting hardware, gasket and 3/4" pipe plug). Capable of stacking.
• 1-0104P adaptor package for fresh water cooled manifold (includes gaskets and block off plate).
• 1-0105 center riser manifold-to-riser gasket for fresh water cooling.
• 1-0106P adaptor package for raw water cooling. Used in pre-heating applications (includes gaskets and block off plate with vent hole).
• 1-0107 center riser manifold-to-riser gasket (raw water cooling).
• 20-0082P riser mounting package for both 20-0082 and 20-0100.
• 20-0082SS P stainless steel mounting package (with brass plugs) for both 20-0082 and 20-0100.
• 20-0084P straight exhaust adaptor (includes adaptor, hose and clamps). For use with 3 1/2" I.D. exhaust hose.
• 20-0085P straight exhaust adaptor (includes adaptor, hose and clamps). For use with 2 1/2" I.D. exhaust hose.
• 20-0086P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 2 1/2" I.D. exhaust hose.
• 20-0087P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose.
• 20-0088P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 2 1/2" I.D. exhaust hose.
• 20-0089P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose.
• 20-0092P 45 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose.
• 20-0093P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3 1/2" or 4" I.D. exhaust hose.
• FM-1-83P manifold mounting package (includes bolts and pipe plugs).
• FM-1-83SS-P stainless steel manifold mounting package (includes stainless bolts and brass plugs).
• FM-47-0000 manifold to cylinder head gasket.
• MC-45-0000 fuel filter and solenoid universal mounting bracket.
• MC-6-0001P exhaust manifold plumbing fittings package for model 215.
• OMC-20-0000P hook up package; may be required for connection to stern drive units (exhaust hose and clamps not included).
• OMC-20-0003 hose bushing 3" to 3 1/2" (where applicable).
• CHV-1-83 water cooled center discharge manifold to fit the small block GM engine (3/4" N.P.T. cooling hose connections). All years.
• CHVA-1-84 water cooled center discharge manifold to fit the big block GM engine (3/4" N.P.T. cooling hose connections). All years.
• CHV-1-83P manifold mounting package (includes bolts and pipe plugs).
• CHV-1-83SS-P stainless steel manifold mounting package (includes stainless bolts and brass plugs).
• CHV-27-0083 alternator bracket. Use where engine water pump is mounted on port side of engine below alternator.
• CHV-47-0000 manifold to cylinder head gasket.
• CHVA-1-84P manifold mounting package (includes bolts and pipe plugs).
• CHVA-1-84SS-P stainless steel manifold mounting package (includes stainless bolts and brass plugs).
• CHVA-47-0000 manifold to cylinder head gasket.
• MC-27-47487 alternator bracket.
• MC-45-0002 fuel filter/solenoid bracket.

Composite kit picture Shown is for reference only. See list of included parts above in the description.

Composite kit picture shown is for reference only. See list of included parts above in the description.

Complete Barr Marine exhaust kit for the Ford Small Block V8 (center riser). Everything listed below is included in this kit, so the complete exhaust setup can be ordered under one part number.

Kit includes:

• (2) FM-1-83 Ford Small Block V8 Center Riser Exhaust Manifold. Water cooled center discharge manifold to fit the small block Ford engine (3/4" N.P.T. cooling hose connections). All years. Includes all plugs, gaskets and mounting hardware to the cylinder head. Replaces Osco FL994, Mallory 9-40111, HGE 1-81, Sierra 18-1998-1 and GLM 56250.
• (2) 20-0082 Water Cooled Center Riser 3 Inch Exhaust Hose. Water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 3" I.D. exhaust hose. Includes plugs, gasket and mounting hardware to mount to the manifold. Replaces Marine Power 0992-000, Osco 992, Mallory 9-40100, HGE 0082, Sierra 18-1999 and GLM 56110.
• (2) 20-0097 Center Riser Spacer Block 3 Inch with Hardware. 3" spacer block (complete with mounting hardware, gasket and 3/4" pipe plug). Capable of stacking. Replaces Osco 994-S3, Mallory 9-40130 and GLM 56030.

Engine application: Ford V8 260, 289, 302 and 351 C.I.D. (Windsor models only, will not fit Cleveland engines).

Fits these applications:

• Crusader V8 302 and 351 C.I.D., all models (center riser generic).
• Indmar V8 302 and 351 C.I.D., all inboard models (center riser generic).
• Interceptor V8 221, 260, 289, 302 and 351 C.I.D., all models (center riser generic).
• MerCruiser V8 (Ford) 302 and 351 C.I.D., all models (center riser generic).
• OMC (Ford) V8 302 and 351 C.I.D., all models (center riser generic).
• PCM V8 302 and 351 C.I.D., all years (center riser generic).
• Waukesha V8 302 and 351 C.I.D., all years (center riser generic).

Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.''s are achieved after replacing an OEM manifold with Barr replacement parts.

• 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).

Compatible parts:

• 20-0100 water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 4" I.D. exhaust hose.
• 20-0102 water cooled center discharge riser (3/4" N.P.T. cooling hose connection).
• 1-0104P adaptor package for fresh water cooled manifold (includes gaskets and block off plate).
• 1-0105 center riser manifold-to-riser gasket for fresh water cooling.
• 1-0106P adaptor package for raw water cooling. Used in pre-heating applications (includes gaskets and block off plate with vent hole).
• 1-0107 center riser manifold-to-riser gasket (raw water cooling).
• 20-0082P riser mounting package for both 20-0082 and 20-0100.
• 20-0082SS P stainless steel mounting package (with brass plugs) for both 20-0082 and 20-0100.
• 20-0084P straight exhaust adaptor (includes adaptor, hose and clamps). For use with 3 1/2" I.D. exhaust hose.
• 20-0085P straight exhaust adaptor (includes adaptor, hose and clamps). For use with 2 1/2" I.D. exhaust hose.
• 20-0086P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 2 1/2" I.D. exhaust hose.
• 20-0087P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose.
• 20-0088P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 2 1/2" I.D. exhaust hose.
• 20-0089P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose.
• 20-0092P 45 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose.
• 20-0093P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3 1/2" or 4" I.D. exhaust hose.
• FM-1-83P manifold mounting package (includes bolts and pipe plugs).
• FM-1-83SS-P stainless steel manifold mounting package (includes stainless bolts and brass plugs).
• FM-47-0000 manifold to cylinder head gasket.
• MC-45-0000 fuel filter and solenoid universal mounting bracket.
• MC-6-0001P exhaust manifold plumbing fittings package for model 215.
• OMC-20-0000P hook up package; may be required for connection to stern drive units (exhaust hose and clamps not included).
• OMC-20-0003 hose bushing 3" to 3 1/2" (where applicable).
• CHV-1-83 water cooled center discharge manifold to fit the small block GM engine (3/4" N.P.T. cooling hose connections). All years.
• CHVA-1-84 water cooled center discharge manifold to fit the big block GM engine (3/4" N.P.T. cooling hose connections). All years.
• CHV-1-83P manifold mounting package (includes bolts and pipe plugs).
• CHV-1-83SS-P stainless steel manifold mounting package (includes stainless bolts and brass plugs).
• CHV-27-0083 alternator bracket. Use where engine water pump is mounted on port side of engine below alternator.
• CHV-47-0000 manifold to cylinder head gasket.
• CHVA-1-84P manifold mounting package (includes bolts and pipe plugs).
• CHVA-1-84SS-P stainless steel manifold mounting package (includes stainless bolts and brass plugs).
• CHVA-47-0000 manifold to cylinder head gasket.
• MC-27-47487 alternator bracket.
• MC-45-0002 fuel filter/solenoid bracket.

Composite kit picture Shown is for reference only. See list of included parts above in the description.

Composite kit picture shown is for reference only. See list of included parts above in the description.

Complete Barr Marine exhaust kit for the Ford Small Block V8 (center riser). Everything listed below is included in this kit, so the complete exhaust setup can be ordered under one part number.

Kit includes:

• (2) FM-1-83 Ford Small Block V8 Center Riser Exhaust Manifold. Water cooled center discharge manifold to fit the small block Ford engine (3/4" N.P.T. cooling hose connections). All years. Includes all plugs, gaskets and mounting hardware to the cylinder head. Replaces Osco FL994, Mallory 9-40111, HGE 1-81, Sierra 18-1998-1 and GLM 56250.
• (2) 20-0100 Water Cooled Center Riser 4 Inch Exhaust Hose. Water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 4" I.D. exhaust hose. Includes plugs, gasket and mounting hardware to mount to the manifold. Designed to limit back pressure on the engine. For use with the Barr CHV-1-83, FM-1-83 and CHVA-1-84 manifolds. Replaces Marine Power 0992-400, Osco 99204, Mallory 9-40113 and GLM 56140.

Engine application: Ford V8 260, 289, 302 and 351 C.I.D. (Windsor models only, will not fit Cleveland engines).

Fits these applications:

• Crusader V8 302 and 351 C.I.D., all models (center riser generic).
• Indmar V8 302 and 351 C.I.D., all inboard models (center riser generic).
• Interceptor V8 221, 260, 289, 302 and 351 C.I.D., all models (center riser generic).
• MerCruiser V8 (Ford) 302 and 351 C.I.D., all models (center riser generic).
• OMC (Ford) V8 302 and 351 C.I.D., all models (center riser generic).
• PCM V8 302 and 351 C.I.D., all years (center riser generic).
• Waukesha V8 302 and 351 C.I.D., all years (center riser generic).

Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.''s are achieved after replacing an OEM manifold with Barr replacement parts.

• 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).

Compatible parts:

• 20-0082 water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 3" I.D. exhaust hose.
• 20-0102 water cooled center discharge riser (3/4" N.P.T. cooling hose connection).
• 20-0097 3" spacer block (complete with mounting hardware, gasket and 3/4" pipe plug). Capable of stacking.
• 1-0104P adaptor package for fresh water cooled manifold (includes gaskets and block off plate).
• 1-0105 center riser manifold-to-riser gasket for fresh water cooling.
• 1-0106P adaptor package for raw water cooling. Used in pre-heating applications (includes gaskets and block off plate with vent hole).
• 1-0107 center riser manifold-to-riser gasket (raw water cooling).
• 20-0082P riser mounting package for both 20-0082 and 20-0100.
• 20-0082SS P stainless steel mounting package (with brass plugs) for both 20-0082 and 20-0100.
• 20-0084P straight exhaust adaptor (includes adaptor, hose and clamps). For use with 3 1/2" I.D. exhaust hose.
• 20-0085P straight exhaust adaptor (includes adaptor, hose and clamps). For use with 2 1/2" I.D. exhaust hose.
• 20-0086P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 2 1/2" I.D. exhaust hose.
• 20-0087P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose.
• 20-0088P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 2 1/2" I.D. exhaust hose.
• 20-0089P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose.
• 20-0092P 45 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose.
• 20-0093P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3 1/2" or 4" I.D. exhaust hose.
• FM-1-83P manifold mounting package (includes bolts and pipe plugs).
• FM-1-83SS-P stainless steel manifold mounting package (includes stainless bolts and brass plugs).
• FM-47-0000 manifold to cylinder head gasket.
• MC-45-0000 fuel filter and solenoid universal mounting bracket.
• MC-6-0001P exhaust manifold plumbing fittings package for model 215.
• OMC-20-0000P hook up package; may be required for connection to stern drive units (exhaust hose and clamps not included).
• OMC-20-0003 hose bushing 3" to 3 1/2" (where applicable).
• CHV-1-83 water cooled center discharge manifold to fit the small block GM engine (3/4" N.P.T. cooling hose connections). All years.
• CHVA-1-84 water cooled center discharge manifold to fit the big block GM engine (3/4" N.P.T. cooling hose connections). All years.
• CHV-1-83P manifold mounting package (includes bolts and pipe plugs).
• CHV-1-83SS-P stainless steel manifold mounting package (includes stainless bolts and brass plugs).
• CHV-27-0083 alternator bracket. Use where engine water pump is mounted on port side of engine below alternator.
• CHV-47-0000 manifold to cylinder head gasket.
• CHVA-1-84P manifold mounting package (includes bolts and pipe plugs).
• CHVA-1-84SS-P stainless steel manifold mounting package (includes stainless bolts and brass plugs).
• CHVA-47-0000 manifold to cylinder head gasket.
• MC-27-47487 alternator bracket.
• MC-45-0002 fuel filter/solenoid bracket.

Composite kit picture Shown is for reference only. See list of included parts above in the description.

Composite kit picture shown is for reference only. See list of included parts above in the description.

Complete Barr Marine exhaust kit for the Ford Small Block V8 (center riser). Everything listed below is included in this kit, so the complete exhaust setup can be ordered under one part number.

Kit includes:

• (2) FM-1-83 Ford Small Block V8 Center Riser Exhaust Manifold. Water cooled center discharge manifold to fit the small block Ford engine (3/4" N.P.T. cooling hose connections). All years. Includes all plugs, gaskets and mounting hardware to the cylinder head. Replaces Osco FL994, Mallory 9-40111, HGE 1-81, Sierra 18-1998-1 and GLM 56250.
• (2) 20-0100 Water Cooled Center Riser 4 Inch Exhaust Hose. Water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 4" I.D. exhaust hose. Includes plugs, gasket and mounting hardware to mount to the manifold. Designed to limit back pressure on the engine. For use with the Barr CHV-1-83, FM-1-83 and CHVA-1-84 manifolds. Replaces Marine Power 0992-400, Osco 99204, Mallory 9-40113 and GLM 56140.
• (2) 20-0097 Center Riser Spacer Block 3 Inch with Hardware. 3" spacer block (complete with mounting hardware, gasket and 3/4" pipe plug). Capable of stacking. Replaces Osco 994-S3, Mallory 9-40130 and GLM 56030.

Engine application: Ford V8 260, 289, 302 and 351 C.I.D. (Windsor models only, will not fit Cleveland engines).

Fits these applications:

• Crusader V8 302 and 351 C.I.D., all models (center riser generic).
• Indmar V8 302 and 351 C.I.D., all inboard models (center riser generic).
• Interceptor V8 221, 260, 289, 302 and 351 C.I.D., all models (center riser generic).
• MerCruiser V8 (Ford) 302 and 351 C.I.D., all models (center riser generic).
• OMC (Ford) V8 302 and 351 C.I.D., all models (center riser generic).
• PCM V8 302 and 351 C.I.D., all years (center riser generic).
• Waukesha V8 302 and 351 C.I.D., all years (center riser generic).

Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.''s are achieved after replacing an OEM manifold with Barr replacement parts.

• 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).

Compatible parts:

• 20-0082 water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 3" I.D. exhaust hose.
• 20-0102 water cooled center discharge riser (3/4" N.P.T. cooling hose connection).
• 1-0104P adaptor package for fresh water cooled manifold (includes gaskets and block off plate).
• 1-0105 center riser manifold-to-riser gasket for fresh water cooling.
• 1-0106P adaptor package for raw water cooling. Used in pre-heating applications (includes gaskets and block off plate with vent hole).
• 1-0107 center riser manifold-to-riser gasket (raw water cooling).
• 20-0082P riser mounting package for both 20-0082 and 20-0100.
• 20-0082SS P stainless steel mounting package (with brass plugs) for both 20-0082 and 20-0100.
• 20-0084P straight exhaust adaptor (includes adaptor, hose and clamps). For use with 3 1/2" I.D. exhaust hose.
• 20-0085P straight exhaust adaptor (includes adaptor, hose and clamps). For use with 2 1/2" I.D. exhaust hose.
• 20-0086P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 2 1/2" I.D. exhaust hose.
• 20-0087P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose.
• 20-0088P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 2 1/2" I.D. exhaust hose.
• 20-0089P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose.
• 20-0092P 45 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose.
• 20-0093P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3 1/2" or 4" I.D. exhaust hose.
• FM-1-83P manifold mounting package (includes bolts and pipe plugs).
• FM-1-83SS-P stainless steel manifold mounting package (includes stainless bolts and brass plugs).
• FM-47-0000 manifold to cylinder head gasket.
• MC-45-0000 fuel filter and solenoid universal mounting bracket.
• MC-6-0001P exhaust manifold plumbing fittings package for model 215.
• OMC-20-0000P hook up package; may be required for connection to stern drive units (exhaust hose and clamps not included).
• OMC-20-0003 hose bushing 3" to 3 1/2" (where applicable).
• CHV-1-83 water cooled center discharge manifold to fit the small block GM engine (3/4" N.P.T. cooling hose connections). All years.
• CHVA-1-84 water cooled center discharge manifold to fit the big block GM engine (3/4" N.P.T. cooling hose connections). All years.
• CHV-1-83P manifold mounting package (includes bolts and pipe plugs).
• CHV-1-83SS-P stainless steel manifold mounting package (includes stainless bolts and brass plugs).
• CHV-27-0083 alternator bracket. Use where engine water pump is mounted on port side of engine below alternator.
• CHV-47-0000 manifold to cylinder head gasket.
• CHVA-1-84P manifold mounting package (includes bolts and pipe plugs).
• CHVA-1-84SS-P stainless steel manifold mounting package (includes stainless bolts and brass plugs).
• CHVA-47-0000 manifold to cylinder head gasket.
• MC-27-47487 alternator bracket.
• MC-45-0002 fuel filter/solenoid bracket.

Composite kit picture Shown is for reference only. See list of included parts above in the description.

Composite kit picture shown is for reference only. See list of included parts above in the description.

Complete Barr Marine exhaust kit for the Ford Small Block V8 (center riser). Everything listed below is included in this kit, so the complete exhaust setup can be ordered under one part number.

Kit includes:

• (2) FM-1-83 Ford Small Block V8 Center Riser Exhaust Manifold. Water cooled center discharge manifold to fit the small block Ford engine (3/4" N.P.T. cooling hose connections). All years. Includes all plugs, gaskets and mounting hardware to the cylinder head. Replaces Osco FL994, Mallory 9-40111, HGE 1-81, Sierra 18-1998-1 and GLM 56250.
• (2) 20-0102 Center Riser Replaces Indmar 532009. Water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Includes plugs, gasket and mounting hardware to mount to the manifold. Replaces Osco 2018, Mallory 9-40112 and GLM 56120.

Engine application: Ford V8 260, 289, 302 and 351 C.I.D. (Windsor models only, will not fit Cleveland engines).

Fits these applications:

• Crusader V8 302 and 351 C.I.D., all models (center riser generic).
• Indmar V8 302 and 351 C.I.D., all inboard models (center riser generic).
• Interceptor V8 221, 260, 289, 302 and 351 C.I.D., all models (center riser generic).
• MerCruiser V8 (Ford) 302 and 351 C.I.D., all models (center riser generic).
• OMC (Ford) V8 302 and 351 C.I.D., all models (center riser generic).
• PCM V8 302 and 351 C.I.D., all years (center riser generic).
• Waukesha V8 302 and 351 C.I.D., all years (center riser generic).

Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.''s are achieved after replacing an OEM manifold with Barr replacement parts.

• 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).

Compatible parts:

• 20-0082 water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 3" I.D. exhaust hose.
• 20-0100 water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 4" I.D. exhaust hose.
• 20-0097 3" spacer block (complete with mounting hardware, gasket and 3/4" pipe plug). Capable of stacking.
• 1-0104P adaptor package for fresh water cooled manifold (includes gaskets and block off plate).
• 1-0105 center riser manifold-to-riser gasket for fresh water cooling.
• 1-0106P adaptor package for raw water cooling. Used in pre-heating applications (includes gaskets and block off plate with vent hole).
• 1-0107 center riser manifold-to-riser gasket (raw water cooling).
• 20-0082P riser mounting package for both 20-0082 and 20-0100.
• 20-0082SS P stainless steel mounting package (with brass plugs) for both 20-0082 and 20-0100.
• 20-0084P straight exhaust adaptor (includes adaptor, hose and clamps). For use with 3 1/2" I.D. exhaust hose.
• 20-0085P straight exhaust adaptor (includes adaptor, hose and clamps). For use with 2 1/2" I.D. exhaust hose.
• 20-0086P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 2 1/2" I.D. exhaust hose.
• 20-0087P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose.
• 20-0088P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 2 1/2" I.D. exhaust hose.
• 20-0089P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose.
• 20-0092P 45 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose.
• 20-0093P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3 1/2" or 4" I.D. exhaust hose.
• FM-1-83P manifold mounting package (includes bolts and pipe plugs).
• FM-1-83SS-P stainless steel manifold mounting package (includes stainless bolts and brass plugs).
• FM-47-0000 manifold to cylinder head gasket.
• MC-45-0000 fuel filter and solenoid universal mounting bracket.
• MC-6-0001P exhaust manifold plumbing fittings package for model 215.
• OMC-20-0000P hook up package; may be required for connection to stern drive units (exhaust hose and clamps not included).
• OMC-20-0003 hose bushing 3" to 3 1/2" (where applicable).
• CHV-1-83 water cooled center discharge manifold to fit the small block GM engine (3/4" N.P.T. cooling hose connections). All years.
• CHV-1-83P manifold mounting package (includes bolts and pipe plugs).
• CHV-1-83SS-P stainless steel manifold mounting package (includes stainless bolts and brass plugs).
• CHV-27-0083 alternator bracket. Use where engine water pump is mounted on port side of engine below alternator.
• CHV-47-0000 manifold to cylinder head gasket.

Composite kit picture shown is for reference only. See list of included parts above in the description.

Complete Barr Marine exhaust kit for the Ford Small Block V8 (center riser). Everything listed below is included in this kit, so the complete exhaust setup can be ordered under one part number.

Kit includes:

• (2) FM-1-83 Ford Small Block V8 Center Riser Exhaust Manifold. Water cooled center discharge manifold to fit the small block Ford engine (3/4" N.P.T. cooling hose connections). All years. Includes all plugs, gaskets and mounting hardware to the cylinder head. Replaces Osco FL994, Mallory 9-40111, HGE 1-81, Sierra 18-1998-1 and GLM 56250.
• (2) 20-0102 Center Riser Replaces Indmar 532009. Water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Includes plugs, gasket and mounting hardware to mount to the manifold. Replaces Osco 2018, Mallory 9-40112 and GLM 56120.
• (2) 20-0097 Center Riser Spacer Block 3 Inch with Hardware. 3" spacer block (complete with mounting hardware, gasket and 3/4" pipe plug). Capable of stacking. Replaces Osco 994-S3, Mallory 9-40130 and GLM 56030.

Engine application: Ford V8 260, 289, 302 and 351 C.I.D. (Windsor models only, will not fit Cleveland engines).

Fits these applications:

• Crusader V8 302 and 351 C.I.D., all models (center riser generic).
• Indmar V8 302 and 351 C.I.D., all inboard models (center riser generic).
• Interceptor V8 221, 260, 289, 302 and 351 C.I.D., all models (center riser generic).
• MerCruiser V8 (Ford) 302 and 351 C.I.D., all models (center riser generic).
• OMC (Ford) V8 302 and 351 C.I.D., all models (center riser generic).
• PCM V8 302 and 351 C.I.D., all years (center riser generic).
• Waukesha V8 302 and 351 C.I.D., all years (center riser generic).

Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.''s are achieved after replacing an OEM manifold with Barr replacement parts.

• 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).

Compatible parts:

• 20-0082 water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 3" I.D. exhaust hose.
• 20-0100 water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 4" I.D. exhaust hose.
• 1-0104P adaptor package for fresh water cooled manifold (includes gaskets and block off plate).
• 1-0105 center riser manifold-to-riser gasket for fresh water cooling.
• 1-0106P adaptor package for raw water cooling. Used in pre-heating applications (includes gaskets and block off plate with vent hole).
• 1-0107 center riser manifold-to-riser gasket (raw water cooling).
• 20-0082P riser mounting package for both 20-0082 and 20-0100.
• 20-0082SS P stainless steel mounting package (with brass plugs) for both 20-0082 and 20-0100.
• 20-0084P straight exhaust adaptor (includes adaptor, hose and clamps). For use with 3 1/2" I.D. exhaust hose.
• 20-0085P straight exhaust adaptor (includes adaptor, hose and clamps). For use with 2 1/2" I.D. exhaust hose.
• 20-0086P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 2 1/2" I.D. exhaust hose.
• 20-0087P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose.
• 20-0088P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 2 1/2" I.D. exhaust hose.
• 20-0089P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose.
• 20-0092P 45 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose.
• 20-0093P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3 1/2" or 4" I.D. exhaust hose.
• FM-1-83P manifold mounting package (includes bolts and pipe plugs).
• FM-1-83SS-P stainless steel manifold mounting package (includes stainless bolts and brass plugs).
• FM-47-0000 manifold to cylinder head gasket.
• MC-45-0000 fuel filter and solenoid universal mounting bracket.
• MC-6-0001P exhaust manifold plumbing fittings package for model 215.
• OMC-20-0000P hook up package; may be required for connection to stern drive units (exhaust hose and clamps not included).
• OMC-20-0003 hose bushing 3" to 3 1/2" (where applicable).
• CHV-1-83 water cooled center discharge manifold to fit the small block GM engine (3/4" N.P.T. cooling hose connections). All years.
• CHV-1-83P manifold mounting package (includes bolts and pipe plugs).
• CHV-1-83SS-P stainless steel manifold mounting package (includes stainless bolts and brass plugs).
• CHV-27-0083 alternator bracket. Use where engine water pump is mounted on port side of engine below alternator.
• CHV-47-0000 manifold to cylinder head gasket.
• CHVA-1-84 water cooled center discharge manifold to fit the big block GM engine (3/4" N.P.T. cooling hose connections). All years.
• CHVA-1-84P manifold mounting package (includes bolts and pipe plugs).
• CHVA-1-84SS-P stainless steel manifold mounting package (includes stainless bolts and brass plugs).
• CHVA-47-0000 manifold to cylinder head gasket.
• MC-27-47487 alternator bracket.
• MC-45-0002 fuel filter/solenoid bracket.

Composite kit picture Shown is for reference only. See list of included parts above in the description.

Composite kit picture shown is for reference only. See list of included parts above in the description.

Water cooled center discharge manifold to fit the small block Ford engine (3/4" N.P.T. cooling hose connections). All years.

Replaces Osco FL994, Mallory 9-40111, HGE 1-81, Sierra 18-1998-1 and GLM 56250.

Engine application: Ford V8 260, 289, 302 and 351 C.I.D. (Windsor models only, will not fit Cleveland engines).

Fits these applications:

• Crusader V8 302 and 351 C.I.D., all models (center riser generic).
• Indmar V8 302 and 351 C.I.D., all inboard models (center riser generic).
• Interceptor V8 221, 260, 289, 302 and 351 C.I.D., all models (center riser generic).
• MerCruiser V8 (Ford) 302 and 351 C.I.D., all models (center riser generic).
• OMC (Ford) V8 302 and 351 C.I.D., all models (center riser generic).
• PCM V8 302 and 351 C.I.D., all years (center riser generic).
• Waukesha V8 302 and 351 C.I.D., all years (center riser generic).

Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.'s are achieved after replacing an OEM manifold with Barr replacement parts.

• Includes all plugs, gaskets and mounting hardware to the cylinder head.
• 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).

Compatible parts:

• 20-0082 water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 3" I.D. exhaust hose.
• 20-0100 water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 4" I.D. exhaust hose.
• 20-0102 water cooled center discharge riser (3/4" N.P.T. cooling hose connection).
• 20-0097 3" spacer block (complete with mounting hardware, gasket and 3/4" pipe plug). Capable of stacking.
• 1-0104P adaptor package for fresh water cooled manifold (includes gaskets and block off plate).
• 1-0105 center riser manifold-to-riser gasket for fresh water cooling.
• 1-0106P adaptor package for raw water cooling. Used in pre-heating applications (includes gaskets and block off plate with vent hole).
• 1-0107 center riser manifold-to-riser gasket (raw water cooling).
• 20-0082P riser mounting package for both 20-0082 and 20-0100.
• 20-0082SS P stainless steel mounting package (with brass plugs) for both 20-0082 and 20-0100.
• 20-0084P straight exhaust adaptor (includes adaptor, hose and clamps). For use with 3 1/2" I.D. exhaust hose.
• 20-0085P straight exhaust adaptor (includes adaptor, hose and clamps). For use with 2 1/2" I.D. exhaust hose.
• 20-0086P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 2 1/2" I.D. exhaust hose.
• 20-0087P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose.
• 20-0088P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 2 1/2" I.D. exhaust hose.
• 20-0089P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose.
• 20-0092P 45 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose.
• 20-0093P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3 1/2" or 4" I.D. exhaust hose.
• FM-1-83P manifold mounting package (includes bolts and pipe plugs).
• FM-1-83SS-P stainless steel manifold mounting package (includes stainless bolts and brass plugs).
• FM-47-0000 manifold to cylinder head gasket.
• MC-45-0000 fuel filter and solenoid universal mounting bracket.
• MC-6-0001P exhaust manifold plumbing fittings package for model 215.
• OMC-20-0000P hook up package; may be required for connection to stern drive units (exhaust hose and clamps not included).
• OMC-20-0003 hose bushing 3" to 3 1/2" (where applicable).

Manufactured by Barr Marine. Part number FM-1-83.

Thermostat housing assembly for dual pump system on Small Block Ford V8's.

Manufactured by Barr Marine. Part number FM-29-0083.

Manifold mounting package (includes bolts and pipe plugs).

Replaces Sierra 18-4363.

Fits these applications:

• Crusader V8 302 and 351 C.I.D., all models (center riser generic).
• Indmar V8 302 and 351 C.I.D., all inboard models (center riser generic).
• Interceptor V8 221, 260, 289, 302 and 351 C.I.D., all models (center riser generic).
• MerCruiser V8 (Ford) 302 and 351 C.I.D., all models (center riser generic).
• OMC (Ford) V8 302 and 351 C.I.D., all models (center riser generic).
• PCM V8 302 and 351 C.I.D., all years (center riser generic).
• Waukesha V8 302 and 351 C.I.D., all years (center riser generic).

Compatible parts:

• FM-1-83 water cooled center discharge manifold to fit the small block Ford engine (3/4" N.P.T. cooling hose connections). All years.
• 20-0082 water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 3" I.D. exhaust hose.
• 20-0100 water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 4" I.D. exhaust hose.
• 20-0102 water cooled center discharge riser (3/4" N.P.T. cooling hose connection).
• 20-0097 3" spacer block (complete with mounting hardware, gasket and 3/4" pipe plug). Capable of stacking.

Manufactured by Barr Marine. Part number FM-1-83P.

Manifold to cylinder head gasket.

Replaces Mallory 9-61420, HGE 10001 and GLM 33790.

Fits these applications:

• Crusader V8 302 and 351 C.I.D., all models (center riser generic).
• Indmar V8 302 and 351 C.I.D., all inboard models (center riser generic).
• Interceptor V8 221, 260, 289, 302 and 351 C.I.D., all models (center riser generic).
• MerCruiser V8 (Ford) 302 and 351 C.I.D., all models (center riser generic).
• OMC (Ford) V8 302 and 351 C.I.D., all models (center riser generic).
• OMC V8 5.0L and 5.8L Cobra, all carbureted models (center riser direct replacement).
• PCM V8 302 and 351 C.I.D., all years (center riser generic).
• Volvo V8 5.0L and 5.8L Cobra, all carbureted models (center riser direct replacement).
• Waukesha V8 302 and 351 C.I.D., all years (center riser generic).

Compatible parts:

• FM-1-83 water cooled center discharge manifold to fit the small block Ford engine (3/4" N.P.T. cooling hose connections). All years.
• OMC-1-3852347 direct replacement exhaust i manifold.
• 20-0082 water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 3" I.D. exhaust hose.
• 20-0100 water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 4" I.D. exhaust hose.
• 20-0102 water cooled center discharge riser (3/4" N.P.T. cooling hose connection).
• OMC-20-913784 direct replacement exhaust riser/ elbow.
• 20-0097 3" spacer block (complete with mounting hardware, gasket and 3/4" pipe plug). Capable of stacking.

Manufactured by Barr Marine. Part number FM-47-0000.

Water cooled exhaust manifold for port side (left). Used in small block Ford V8 239, 292, and 312 C.I.D. marine engine applications.

Engine application: Ford and Mercury V8 OHV 239, 292 and 312 C.I.D.

Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.'s are achieved after replacing an OEM manifold with Barr replacement parts.

• Manifold end plate and gasket listing: front end plate 1-0031, front gasket 1-0022, exhaust end plate 1-0024, exhaust end gasket 1-0022, header adaptor 1-0000.
• 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).

Manufactured by Barr Marine. Part number FM-1-5457L.

Water cooled exhaust manifold for starboard side (right). Used in small block Ford V8 239, 292, and 312 C.I.D. marine engine applications.

Engine application: Ford and Mercury V8 OHV 239, 292 and 312 C.I.D.

Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.'s are achieved after replacing an OEM manifold with Barr replacement parts.

• Manifold end plate and gasket listing: front end plate 1-0031, front gasket 1-0022, exhaust end plate 1-0024, exhaust end gasket 1-0022, header adaptor 1-0000.
• 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).

Manufactured by Barr Marine. Part number FM-1-5457R.

Water cooled exhaust manifold for port side (left) Used in Ford V8 302 and 351 C.I.D. 2 barrel Windsor marine engine.

Engine application: Ford and Mercury V8 302 and 351 C.I.D. Windsor 2 barrel carburetor (will not fit Cleveland engines).

Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.'s are achieved after replacing an OEM manifold with Barr replacement parts.

• Manifold end plate and gasket listing: front end plate 1-0032, front gasket 1-0019, exhaust end plate 1-0025, exhaust end gasket 1-0019, header adaptor 1-0001.
• 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).

Manufactured by Barr Marine. Part number FM-1-6970L.

Water cooled exhaust manifold for starboard side (right) Used in Ford V8 302 and 351 C.I.D. 2 barrel Windsor marine engine.

Engine application: Ford and Mercury V8 302 and 351 C.I.D. Windsor 2 barrel carburetor (will not fit Cleveland engines).

Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.'s are achieved after replacing an OEM manifold with Barr replacement parts.

• Manifold end plate and gasket listing: front end plate 1-0032, front gasket 1-0019, exhaust end plate 1-0025, exhaust end gasket 1-0019, header adaptor 1-0001.
• 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).

Manufactured by Barr Marine. Part number FM-1-6970R.

Water cooled exhaust manifold for port side (left). Used in Ford/Mercury V8 model years 1958-67 332, 352, 390 and 427 C.I.D. marine engines.

Engine application: Ford and Mercury V8 OHV 332, 352, 390 and 427 C.I.D., 1958-67.

Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.'s are achieved after replacing an OEM manifold with Barr replacement parts.

• Manifold end plate and gasket listing: front end plate 1-0032, front gasket 1-0019, exhaust end plate 1-0025, exhaust end gasket 1-0019, header adaptor 1-0001.
• 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).

Manufactured by Barr Marine. Part number FE-1-58L.

Water cooled exhaust manifold for starboard side (right). Used in Ford/Mercury V8 model years 1958-67 332,352,390 and 427 C.I.D. marine engines.

Engine application: Ford and Mercury V8 OHV 332, 352, 390 and 427 C.I.D., 1958-67.

Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.'s are achieved after replacing an OEM manifold with Barr replacement parts.

• Manifold end plate and gasket listing: front end plate 1-0032, front gasket 1-0019, exhaust end plate 1-0025, exhaust end gasket 1-0019, header adaptor 1-0001.
• 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).

Manufactured by Barr Marine. Part number FE-1-58R.

Full circle damper 13.25" diameter for 26 spline transmissions. For engines up to 370 C.I.D. Not pictured.

Manufactured by Barr Marine. Part number AS5-K2C.

Full circle damper 13.25" diameter for 26 spline transmissions. For engines up to 454 C.I.D.

Manufactured by Barr Marine. Part number AS7-K2C.

Fully jacketed swivel-type exhaust riser; 7" riser protection. Use for Models F, G, K, and Q; requires (1) CC-6-80 package.

Fits these applications:

• Chris-Craft V8 283, 302, 305, 307, 327 and 350 C.I.D., all models (generic).
• Flagship V8 283, 327 and 350 C.I.D. (log style generic).
• Gray Marine V8 401 C.I.D. 280 H.P., all models (direct replacement).
• Interceptor V8 239, 256, 272, 292 and 312 C.I.D., models 125, 135, 150, 170, 185 and 215 H.P. (log style generic).
• Interceptor V8 221, 260 and 289 C.I.D., models 120, 140, 165, 190, 200 and 210 H.P. (log style generic).
• Interceptor V8 352, 390 and 427 C.I.D., models 240, 250, 260, 285 and 300 H.P. (log style generic).

Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.'s are achieved after replacing an OEM manifold with Barr replacement parts.

• Requires (2) mounting hardware kits #20-0002P ((1) kit to mount riser to manifold and (1) kit to mount elbows #20-0034 or #20-0035 to riser).
• A header adaptor style end cap must be installed on the exhaust end of the log manifold in order to mount these risers or elbows. See the manifold end plate and gasket identification listing for the proper end plates for your application.
• Barr exhaust risers and connectors can be swiveled inboard or outboard in the horizontal plane, and all except straight connectors can also be swiveled in the vertical plane.
• 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).

Compatible parts:

• GR-1-6470L water cooled exhaust manifold (port side) to fit the 401 Buick. Includes all fittings, hose adaptors and primary water pump mounting provision.
• GR-1-6470R water cooled exhaust manifold (starboard side) to fit the 401 Buick. Includes all fittings, hose adaptors and primary water pump mounting provision.
• INT-1-5457L water cooled exhaust manifold (port side) for the Ford engine. Use with Barr risers and exhaust connectors.
• INT-1-5457R water cooled exhaust manifold (starboard) for the Ford engine. Use with Barr risers and exhaust connectors.
• INT-1-58L water cooled exhaust manifold (port) for the Ford engine. Use with Barr risers and connectors.
• INT-1-58R water cooled exhaust manifold (starboard) for the Ford engine. Use with Barr risers and connectors.
• INT-1-6268L water cooled exhaust manifold (port) for the Ford engine. Use with Barr risers and connectors.
• INT-1-6268R water cooled exhaust manfold (starboard for the Ford engine. Use with the Barr risers and connectors.
• OF-1-60L water cooled end discharge port manifold to fit the small block Chevrolet (1/2" N.P.T. cooling hose connections). All years.
• OF-1-60R water cooled end discharge starboard manifold to fit the small block Chevrolet (1/2" N.P.T. cooling hose connections). All years.
• 20-0000 swivel-type high discharge exhaust riser; 8 1/2" riser protection. Requires (1) mounting hardware kit #20-0002P per riser.
• 20-0031 swivel-type 90 degree exhaust elbow connector with internal water discharge. Accepts 2 1/2" to 3" I.D. exhaust hose.
• 20-0055 swivel-type 30 degree exhaust elbow connector; fully jacketed. Accepts 2 1/2" or 3" I.D. exhaust hose.
• 1-0012L adaptor for Chris Craft V8 283 C.I.D. Manifolds prior to Models F, G, K and Q (three pass manifold system) left side. Requires Chris Craft adaptor part #16.20-07602 (port side).
• 1-0012R adaptor for Chris Craft V8 283 C.I.D. Manifolds prior to Models F, G, K and Q (three pass manifold system) right side. Requires Chris Craft adaptor part #16.20-07064 (starboard side).
• 1-0019 end plate gasket (will fit both ends).
• 1-0022 end plate gasket (will fit both ends).
• 20-0002P mounting hardware kit.
• CC-6-80 pressure relief valve adaptor package for use with Chris Craft direct replacement risers as needed.
• CC47-1650-05944 end cap gasket for all models except 283 C.I.D. with flywheel forward (Order (2) of the appropriate gaskets according to your requirements).
• CC47-1650-06022 end cap gasket for 283 C.I.D. with flywheel forward (Order (2) of the appropriate gaskets according to your requirements).
• CHV-47-0000 manifold to cylinder head gasket.
• OF-1-60F-P manifold to cylinder head mounting package.

Manufactured by Barr Marine. Part number 20-0039.