Accessories - Billet Marine Hardware

Spun Aluminum Cup Holders - Powder Coated Colors

These are spun aluminum style cup holders that are designed to be sunk in when mounted, providing a flush style mounting Each cup holder features a rigid mounting flange, while the main body is 3" deep These cup holders will accommodate most beverage cans or cups.

Dimensions:	Large, 125-D300	Medium, 125-D301	Small, 125-D302
Outside (Lip) Diameter:	4-1/2"	4"	3-3/4"
Cutout Diameter:	3-3/4"	3-3/8"	3-1/8"
Depth:	3"	3"	3"

See what each of our powder-coated finishes (both flat and glossy) look like under different lighting here!

Transom Cover Plates

Transom cover plates are for use when the exhaust ports (tips) are removed to install over the transom style exhaust. The plates cover the holes left in the transom. These plates are machined from 6061-T6 billet aluminum - they are not inexpensive castings. The outside plates are 5-1/2" in diameter to cover the largest exhaust ports. The inner plates are 4-1/2" in diameter. The outside plate is threaded on the back side. To install, you merely sandwich the transom of the boat between the plates. No fiberglass work, no hassle. If you ever decide to change your exhaust back, just remove the plates and your ready!

Sold as a kit to cover 2 exhaust holes. Due to varying transom thicknesses the covers do NOT come with mounting bolt. Requires 5/16" bolt long enough to go through transom and internal mounting plate.

Flat Style Billet Aluminum Powder Coated Gauge Bezels

Hardin Marine Gauge Bezels are available in two different styles, flat or angled. These bezels are designed to be slid onto the gauge behind the trim ring and then the gauge installed into the dash offering the perfect accent of color to any dash and an easy installation at that. Each bezel is CNC machined from billet aluminum and then beautifully powder coated.Sizes: Standard 2-1/16", Large 2-5/8", Tach/Speedo 3-3/8", Nordskog/Gaffrig 3-5/8", Gaffrig 4", Monster 4-5/8" and Gaffrig 4" to 3-3/8" Adapter, which will allow you to cover a dash opening from an old 4" Speedo when upgrading to a modern 3-3/8" Speedo.

Angled Style Billet Aluminum Powder Coated Gauge Bezels

Hardin Marine Gauge Bezels are available in two different styles, flat or angled. These bezels are designed to be slid onto the gauge behind the trim ring and then the gauge installed into the dash offering the perfect accent of color to any dash and an easy installation at that. Each bezel is CNC machined from billet aluminum and then beautifully powder coated.

Sizes:
• Standard 2-1/16"
• Large 2-5/8"
• Tach/Speedo 3-3/8"
• Monster 4-5/8"
Angled bezels have a 15 degree angle

These angled bezels make it easier for you to cant a gauge towards your view when driving.


See what each of our powder-coated finishes (both flat and glossy) look like under different lighting here!

GPS Receiver Bezel

This beautifully styled bezel provides a touch of color to match your gauge and switches when mounting your GPS Receiver puck.  Manufactured from 6061-T6 billet aluminum and powdercoated in a variety of popular colors. 2-3/4" O.D. 2 1/8" I.D.

See what each of our powder-coated finishes (both flat and glossy) look like under different lighting here!

4-5/8" Gauge Spacer Bezel

This beautifully styled bezel provides 1-1/2" of extra lift from the dash for your monster size Tach or Speedo. Your RPM and Speed are some of the most important numbers in your boat, so make sure they get put front and center. 5-1/4" OD, 4-5/8" ID. 1-1/2" Tall.

See what each of our powder-coated finishes (both flat and glossy) look like under different lighting here!

Billet Aluminum Ignition Switch Bezel

Here's another great way to highlight any dash. These easy to install billet switch bezels come in all popular colors to fit key switches, push-pull switches, toggle switches, and even push button switches.

See what each of our powder-coated finishes (both flat and glossy) look like under different lighting here!

Billet Aluminum Push / Pull Switch Bezel

Here's another great way to highlight any dash. These easy to install billet switch bezels come in all popular colors to fit key switches, push-pull switches, toggle switches, and even push button switches.

See what each of our powder-coated finishes (both flat and glossy) look like under different lighting here!

Billet Aluminum Push Button Switch Bezel

Here's another great way to highlight any dash. These easy to install billet switch bezels come in all popular colors to fit key switches, push-pull switches, toggle switches, and even push button switches.

See what each of our powder-coated finishes (both flat and glossy) look like under different lighting here!

Billet Aluminum Toggle Switch Bezel

Thread size on this bezel is: 15/32 to match most of all standard toggle switches.

Here's another great way to highlight any dash. These easy to install billet switch bezels come in all popular colors to fit key switches, push-pull switches, toggle switches, and even push button switches.

See what each of our powder-coated finishes (both flat and glossy) look like under different lighting here!

Powdercoated 22mm (7/8") Bezel, fits 22MM LED Push Button Switches (See Related Parts). 7/8" I.D, 1-3/8" O.D

See what each of our powder-coated finishes (both flat and glossy) look like under different lighting here!

Billet Aluminum Beveled Toggle Switch Bezel

Thread size on this bezel is: 15/32 to match most of all standard toggle switches.

Here's another great way to highlight any dash. These easy to install billet switch bezels come in all popular colors to fit key switches, push-pull switches, toggle switches, and even push button switches. This bezel is similar to 125-26-S but has a tall bevel to the top rather than being flat.

See what each of our powder-coated finishes (both flat and glossy) look like under different lighting here!

Billet Aluminum Switch Knobs - Plain, Pump, Blower, Light, Mag, Fuel, NOS, Accessory

These billet aluminum switch knobs are perfect for accenting and tying in the colors of your boat. They are available in all of the popular colors and simply thread on to all 10-24 standard switches.

See what each of our powder-coated finishes (both flat and glossy) look like under different lighting here!

Toggle Nut and Boot System

The Toggle Nut and Boot System compliments your toggle switches while adding a protective seal against moisture. The nut and boot system easily installs without removing your dash panel. O.D of bezel is .625 or 5/8"

Includes:

• 6 Black Boots
• 6 White Boots
• 6 Seals
• 6 Powder-coated Nuts
• 1 Installation Wrench

These work with 15/32" thread switches

1/4", 5/16", 3/8", 7/16" and 1/2" Stringer Washers

• O.D. 1-3/8"
• I.D. 1/4", 5/16", 3/8", 7/16", 1/2"
  • I.D. based on size you choose
• Thickness 1/4"

These beautifully finished CNC machined stringer washers are the finishing touch to any installation. Available in Machined, Blue, Red, and Black. 1-3/8" O.D, 1/4" Thick.

Circuit Breaker Nut and Boot System

The Circuit Breaker Nut and Boot System compliments your circuit breaker switches while adding a protective seal against moisture. The nut and boot system easily installs without removing your dash panel.  Fits all ETA circuit breaker switches

Includes:

• 6 Clear Boots
• 6 Seals
• 6 Powder-coated Nuts
• 1 Installation Wrench

These work with 3/8" thread circuit breaker switch.

5" Billet Aluminum Euro Style Handle - Each

We've got them - the latest in billet handles. These Euro Styled Handles feature smooth contoured shapes and edges. These units use the same mounting holes as the traditional handles and vents so they are perfect fora new boat building project or they will retro-fit the traditional handles and vents manufactured by Hardin Marine.

*Note- These grab handles are 7" long with 5" bolt centers. 5/16-18 NC blind hole threads

See what each of our powder-coated finishes (both flat and glossy) look like under different lighting here!

5" Single Grip Billet Aluminum Grab Handle - Each

Hardin Marine offers this popular grab handle constructed from billet aluminum in both a single hand 5" version and a dual hand 10"version. Both handles feature blind tapped holes allowing them to be mounted with no hardware exposed. These handles work great in conjunction with the Hardin Marine billet vents.

*Note- These grab handles are 7" long with 5" bolt centers

See what each of our powder-coated finishes (both flat and glossy) look like under different lighting here!

8-3/4"Billet Aluminum Euro Style Handle - Each

Size of Handle based on Bolt Hole - to - Bolt Hole

We've got them - the latest in billet handles. These Euro Styled Handles feature smooth contoured shapes and edges. These units use the same mounting holes as the traditional handles and vents so they are perfect for a new boat building project or they will retro-fit the traditional handles and vents manufactured by Hardin Marine.

*Note- These grab handles are 10" long with 8-3/4" bolt centers

See what each of our powder-coated finishes (both flat and glossy) look like under different lighting here!

10" Billet Aluminum Euro Style Handle - Each

We've got them - the latest in billet handles. These Euro StyledHandles feature smooth contoured shapes and edges. These units use thesame mounting holes as the traditional handles and vents so they areperfect fora new boat building project or they will retro-fit the traditionalhandles andvents manufactured by Hardin Marine.

*Note- These grab handles are 11-1/2" long with 10" bolt centers. Internal threads are 5/16-18"