E-Z Oil Drain Kit - Fits Oil Pan Drain Plug Holes With 1/2-20 Thread
This kit is the answer to the job we all hate - oil changes. By installing an E-Z oil drain hose into your existing drain plug hole you simply pull the other end out the drain plug hole and drain the oil from outside your boat. It doesn't get any easier than this! The hose is 44" long and has a cap. Gen 4 BBC oil pans are typically 1/2"-20 and Gen 5/6 pans are typically 12mm metric. These drains kits use 3/8" marine hose. NOTE: To pull drain hose through the external boat drain plug requires a minimum 7/8" hole.
E-Z Oil Drain Kit - Fits Oil Pan Drain Plug Holes With Metric 12 X 1.75 Thread (Most Late Model MerCruiser Pans)
This kit is the answer to the job we all hate - oil changes. By installing an E-Z oil drain hose into your existing drain plug hole you simply pull the other end out the drain plug hole and drain the oil from outside your boat. It doesn't get any easier than this!
The hose is 44" long and has a cap. The end of the hose is approx 13/16 and passes through all standard 1/2"NPT drain plug outlets. These drains kits use 3/8" marine hose. NOTE: To pull drain hose through the external drain plug requires a minimum 7/8" hole.
Gen 4 BBC oil pans are typically 1/2"-20 and Gen 5/6 pans are typically 12mm metric.
Lost your drain plug? Now you can replace
your originals with the all new Hardin Marine stainless steel threaded boat
drains. This is a threaded plug only. It will thread into the base of 620-06700. 1/2" NPT thread.
No wires on the plug! Easy to use unlike other models that wire the plug.
1/2" NPT Stainless Steel Plug
Easy to install base
Over 2000 Lumens
Yet another Hardin Marine first in a high quality cast stainless steel bilge drain plug loaded with ultra bright sealed LED lights with a maximum light output of up to 28LM/WATTS. This unit is a the standard industry size and retrofits most standard drain plug receivers today and a 1/2 NPT plug is included. The unit can be wired for use a Red, Blue, Green, or standard White color or add the Hardin RGB control box and switch between color options via an iPhone App on the fly! Unlike competing LED drain plugs, the Hardin's LED's are wired to the base NOT the plug.
Stainless Steel 1/2"NPT replacement drain plugs with safety lead
This replacement stainless steel drain plug and lead can be used as a retrofit to existing 1/2" NPT style plugs or a replacement for the MerCuiser plug used in *525-32-865281A02 Oil Drain kits*
These billet aluminum self-bailing bilge drains are designed to
attach to the
back of the hull over the drain hole. By incorporating a one-way rubber
style flap they allow water to exit the boat while underway, yet
restrict the
water from entering the while stopped.
This drain measures 2" X 2" with a 1-1/2" center drain hole. Bolt Holes are 1.340" center to center.
We carry all of the popular twist-in drain plugs from original aluminum drain plugs to stainless and brass plugs. The is the sleeve the plug fits in. 2" Long. 1" tube O.D.