Mercury Marine Catalog - Tools & Accessories

Oil Pump Pickup Installer 91-809929

Installs the 5/8 in. (16 mm) diameter oil pickup tube and screen into the engine's oil pump.

Oil Pump Pickup Installer 91-809938

Installs the 3/4 in. (19 mm) diameter oil pickup tube and screen into the engine's oil pump.

Oil Seal Driver 91-31108T

Installs the oil seals in the bearing carrier on the MC-1, R-MR, Alpha One and Alpha One Gen II drive units.

Supersedes: 91-31108

Supercedes: 91-31108

Oil Seal Driver 91-55916

Installs the oil seals in the TR, Bravo One and Bravo Two drive unit bearing carriers.

Oil Seal Driver 91-817569T

Installs and removes the Alpha One Gen II counter rotating bearing carrier seals; also, install seals in the drive shaft seal carrier.

Supersedes: 91-817569

Supercedes: 91-817569

Orificed Restrictor Adaptor 91-854271

Required on all D-Tronic D7.3L engines only.

Pilot Washer 91-36571T

Use as a centering guide to install the pinion bearing in the MC-1, R-MR, Alpha One and Alpha One Gen II drive units.

Supercedes: 91-36571

Pilot Washer 91-37350T

Use with 91-31229A7 Universal Bearing Puller Kit.

Supercedes: 91-37350

Pinion Gear Shimming Tool 91-56048001

Measures the pinion heights of the MC-1, R-MR Alpha One and Alpha One Gen II drive units.

Pinion Gear Shimming Tool 91-865114T

Measures the pinion (drive) gear depth of the driveshaft housing

Supercedes: 91-865114

Pinion Nut Adaptor 91-61067A04

Holds the pinion nut when removing the pinion gear and drive shaft on the MC-1, R-MR and Alpha One drive units.

Supercedes: 91-61067A1, 91-61067A2, 91-61067A3, 91-61067A3

Pinion Nut Wrench 91-61067T03

Holds the pinion nut when removing the pinion gear and driveshaft.

Supercedes: 91-610672, 91-61067003

Pipe Tap 91-95639

Taps the bell housing for shift cable installation on the MC-1, R-MR and Alpha One drive units.

Plate Puller 91-29310

Use as a guide to remove and install the gimbal bearing on the MC-1, R-MR, Alpha One, Alpha One Gen II, Blackhawk and all Bravo drive units.

Portable Timing Light 91-99379

Checks the ignition timing, powered by two D cell batteries.

Power Steering Adapter Kit 91-806908A02

Adapts power steering test gauge (91-385053A05) to test power steering control valves.

Power Steering Test Gauge Kit 91-38053A05

Tests the power steering system pressure.

Power Trim Adapter Fitting 91-822778004

Replaces power trim manual release valve when testing power trim circuits.

Propeller Nut Tool 91-805457T1

Installs and removes the front propeller nut on the Blackhawk and Bravo Three drive units.

Supercedes: 91-805457, 91-8054571

Propeller Shaft Adaptor 91-61077T

Provides a wrench surface to turn the propeller shaft on the MC-1, R-MR, Alpha One, Alpha One Gen II, Balckhawk and all Bravo drive units.

Supersedes: 91-61077

Supercedes: 91-61077