602-GEN-II-1-81-COMP-MODIFIED SE116 1.81 Mod. Complete (Replaces Mercruiser Gen II)
|
|
602-GEN-II-1-94-COMP-REV-ROT SE116 1.94 Complete - C.R. (Replaces Mercruiser Gen II)
Counter rotation unit, do not use for standard rotation.
Comes with a 9-9/16 new style input yoke.
Does not include Complete Install Kit or Anode Kit.
Uses the latest style speedometer fitting - OE#860382. This part is not included and will be required to have a working speedometer.
|
|
602-GEN-II-1-94-COMP SE116 1.94 Complete (Replaces Mercruiser Gen II)
Does not Include Complete Install Kit or Anode Kit.
Uses the latest style speedometer fitting - OE#860382. This part is not included and will be required to have a working speedometer.
|
|
602-GEN-II-1-94-COMP-REV-ROT-M For use with 9D-116 Conversion Kit only.
Counter rotation unit, do not use for standard rotation.
Comes with a 9-9/16 new style input yoke.
Does not include Complete Install Kit or Anode Kit.
|
|
602-GEN-II-1-94-COMP-MODIFIED SE116 1.94 Mod. Complete (Replaces Mercruiser Gen II)
|
|
602-GEN-II-2-00-COMP Does not Include Complete Install Kit or Anode Kit.
This item is to replace 2.00 Ratio drives only.
Uses the latest style speedometer fitting - OE#860382. This part is not included and will be required to have a working speedometer.
|
|
602-GEN-II-2-40-COMP Does not Include Complete Install Kit or Anode Kit.
This item is to replace 2.40 Ratio drives only.
Uses the latest style speedometer fitting - OE#860382. This part is not included and will be required to have a working speedometer.
|
|
602-90-118-02 To replace Counter Rotation units only. Do not use for standard rotation.
Will not replace 2.00 and 2.40 ratio units.
Up to 300 HP.
Uses the latest style speedometer fitting - OE#860382. This part is not included and will be required to have a working speedometer.
|
|
602-90-116-02H Will only replace 2.00 or 2.40 ratio units.
Uses the latest style speedometer fitting - OE#860382. This part is not included and will be required to have a working speedometer.
|
|
602-90-116-02 Will not replace 2.00 or 2.40 ratio units.
Up to 300 HP.
Uses the latest style speedometer fitting - OE#860382. This part is not included and will be required to have a working speedometer.
|
|
602-90-116-01D SE116, UPPER 1.47 (Replaces Mercruiser Gen II)
The 1.47 ratio replaces the 1.5 ratio
|
|
602-90-116-01DM SE116, UPPER 1.47 MODIFIED (Replaces Mercruiser Gen II)
The 1.47 ratio replaces the 1.5 ratio
|
|
602-90-116-01C SE116, UPPER 1.62 / 2.0 (Replaces Mercruiser Gen II)
The 1.62 ratio replaces the 1.65 and the 2.0 ratio
|
|
602-90-116-01CM SE116, UPPER 1.62/2.0 MODIFIED (Replaces Mercruiser Gen II)
The 1.62 ratio replaces the 1.65 and the 2.0 ratio
|
|
602-90-116-01B SE116, UPPER 1.81 (Replaces Mercruiser Gen II)
The 1.81 ratio replaces the 1.84 ratio
|
|
602-90-116-01BM SE116, UPPER 1.81 MODIFIED (Replaces Mercruiser Gen II)
The 1.81 ratio replaces the 1.84 ratio
|
|
602-90-116-01A SE116, UPPER 1.94 / 2.40 (Replaces Mercruiser Gen II)
The 1.94 ratio replaces the 1.98 and the 2.4 ratios
|
|
602-90-116-01AM SE116, UPPER 1.94 MODIFIED (Replaces Mercruiser Gen II)
The 1.94 ratio replaces the 1.98 and the 2.4 ratios
|
|
602-90-206 The SE 206 gear case replaces most Mercury 2.0, 2.4 and
2.5 liter gear cases with 4-3/4 Bullet Diameter.\
|
|
602-90-216 SE216
Replaces Most Mercury 3.0L Lower Units
13 Splines
20, 25, and 30 inch Shafts.
If you have an 8 Spline drive shaft you will need to buy the stub shaft unit
and purchase an upper driveshaft from an OE dealer.
20" 45-824114A 1
25" 45-823901A 1
30" 45-824115A 1 (This item is no longer available from the OE. You will need to source a used one, or fix your old drive.)
If you have a 13 spline two piece shaft just purchase the appropriate
one piece shaft.
The SEI 216 gear cases are supplied with the correct water tube coupling for units with a serial number of OG438000 and higher. If your unit has a lower serial number, you will need to use your old water coupling or purchase the correct part (SEI part number 96-116-12K).
|
|
