700-12685 Magnesium Anode Kit - For V4 & V6
|
|
700-12673 Magnesium Anode Kit
For MR / Alpha One (1984-1990)
|
|
700-12721 Magnesium Anode Kit (For All Alpha One Gen II Drives) replaces MerCruiser part # 888755Q01
|
|
700-12715 Magnesium Anode Trim Cylinder (Mounts on Alpha One Gen II) replaces MerCruiser part # 806189A2
|
|
700-12728 Magnesium Prop Nut Anode Kit replaces MerCruiser part # 809658
Prop Nut Anode Kit. Shaft Size: 3/4" Thread: 1/2 NC 13
|
|
700-22840 Main Bearings - Big End- 8125 Journal Size- 9.9-15 HP (1974-95) 9.9-15 HP (1974-83)
|
|
700-22920 Main Bearings- Most Early & Late Model 45-60 HP 2-Cyl. and 3-Cyl. Models
|
|
700-22930 Main Bearings- Many Late Model 45-60 HP 2-Cyl. and 3-Cyl. Models
|
|
700-32040 Mallory V8 Distributor Cap Gasket (5 per pack) replaces MerCruiser part # 391-5076
|
|
700-72620 Mallory V8 Tune-Up Kits replaces MerCruiser part # 391-5090T1 Kit Contains: | Part # | MerCruiser # | Description | | Part # | MerCruiser # | Description | | 700-70060 | 391-5090 | Point | | 700-70580 | 391-5092 | Condenser | | 700-71040 | 391-7057 | Rotor |
|
|
700-76085 MerCarb 2-Barrel Carburetor Kit replaces MerCruiser part # 3302-804845 Early MerCarb Fits (1983-1986) with #1 Design Accelerator Pump
|
|
700-76086 MerCarb 2-Barrel Carburetor Kit replaces MerCruiser part # 3320-804844 Late MerCarb Fits (1985-present) with #2 Design Accelerator Pump
|
|
This Part has options, please click the button below to order.
700-51230 Mercruiser 305/350/377, 5.0/5.7/6.2 Small Block Chevy Exhaust Manifold Assembly (Iron Casting) replaces MerCruiser part # 860246A10
| Qty |
Description |
OEM # |
| 1 |
Exhaust Manifold |
860246Q11 |
| 1 |
Hose Fitting w/ Drain Plug |
22-806926A1 |
| 1 |
Gasket-Elbow |
27-863724 |
| 1 |
Gasket-Manifold |
27-33395 |
| 1 |
Plug |
N/A |
Fits: Mercruiser Model GM 305/350/377, 5.0/5.7/6.2 V8 Small Block Chevrolet 1983-2003. Can be used with 3" or 4" riser.
|
|
700-58990 Mercruiser SBC 1978-1982 Log to Center Rise Conversion Exhaust Kit
| Qty |
Description |
| 2 |
Center Rise Manifold |
| 2 |
Exhaust Elbow |
| 1 |
Thermostat Housing Kit |
| 1 |
Alternator Bracket |
| All hardware, hoses and gaskets included to complete the conversion right! See Installation Instructions for complete parts list. |
This kit converts 1978-1982 305/5.0L & 350/5.7L CID, Log Style Manifolds to the 1983-2002 style Center Rise Manifolds. The conversion kit uses two elbows to bring exhaust down to the original Y-Pipe. The 1982 and older Y-Pipe is 4" in diameter and round at the inlet, newer designs are oval at the inlet. Not for use on engines w/ high mounted power steering pumps. Replaces Mercury 77234A7 and 77235A8 manifolds and 76351A2 risers.
|
|
700-51212 Exhaust Manifolds Assembly replaces MerCruiser part # 96705A1. Fits Model 140 Inline 4 Cylinder 181 CID 1968-1982.
|
|
700-51240 Mercruiser Big Block Chevy Exhaust Manifold Kit 454/502 89011A8 / 807078T08
| Qty |
Description |
OEM # |
| 1 |
Exhaust Manifold |
807078T08 |
| 1 |
Hose Fitting w/ Drain Plug |
22-806926A1 |
| 1 |
Gasket-Elbow |
27-863724 |
| 1 |
Gasket-Manifold |
27-46820 |
- Direct Replacement for Mercruiser Big Block Chevy 454/502 Manifold
- Manifold Constructed from Cast Iron and painted with black corrosion resistant paint.
- Individual Runners for Improved Performance over Stock Manifold
- Replaces Mercruiser #807078T10, 80707T08 and 89011A8, 807078A6 Manifolds.
- Can use with 4" or 3" Riser
- Includes Gaskets
- 3-Year Warranty
- Sold Each.
|
|
700-58660 Stock Mercruiser Replacement Small Block Chevy 5.0/5.7L 305/350 Cast Iron Dry Joint Alternative Manifold / Riser Kit. This kit will replace a dry-joint style factory Mercruiser Exhaust to a more cost effective original style Wet-Joint exhaust. NOTE: This is a single manifold/riser package. 2 Kits would be needed for one engine.
| Kit Includes: |
| Qty |
Description |
OEM # |
| 1 |
Exhaust Elbow |
N/A |
| 1 |
Exhaust Manifold Assy. |
860246A10 |
| 1 |
Gasket-Elbow |
27-863724 |
| 2 |
Gasket-Manifold |
27-33395 |
| 4 |
Screw-Hex Flanged |
10-865982057 |
| 4 |
Lockwasher |
13-35048 |
| 2 |
Hose Fitting w/ Drain Plug |
22-806926A1 |
|
|
This Part has options, please click the button below to order.
700-58663
- One Manifold and One Riser.
- Constructed from Heavy Duty Cast Iron
- Individual Runners for Improved Performance over Stock Manifolds
- 4 inch, Standard Risers
- Includes Bolts and Gaskets
- 3 inch spacer
|
|
700-58237 Stock Mercruiser Replacement Small Block Chevy 5.0/5.7L 305/350 Cast Iron Dry Joint Manifold / 14 Degree Riser Kit. This is a dry-joint style replacement system.
|
|
This Part has options, please click the button below to order.
700-58238 Stock Mercruiser Replacement Small Block Chevy 5.0/5.7L 305/350 Cast Iron Dry Joint Manifold / 7 Degree Riser Kit. This is a dry-joint style replacement system.
|
|
