625-4306 Wear Plate Gen 8 Sea Pump with Gen 1 Rear Cap
|
|
625-4310 Wear Plate Gen 8 Sea Pump with Gen 2 Rear Cap
|
|
625-4274 This replaces Mercury OEM P/N #840052
|
|
625-4081 Wear Plate, Internal - Gen I
|
|
160-14-1447-60 Wear Ring Self-Tapping Screws
|
|
462-661-4150 Weatherdeck Toggle Switch, Off/On
"
- Use with Weatherdeck⢠waterproof panel. Nickel-plated brass and phenolic non-corrosive construction. On in parenthesis (On) indicates a momentary postion.
- Rated 15A @ 32V DC or 125V AC, 10A @ 250V AC.
- On in parenthesis (On) indicates a momentary postion.
- Terminal :.25" Tab
"
Positions: Off/On, Type: SPST
Sold: Each
|
|
462-661-4304 Water resistant to IP67. Constructed from corrosion resistant materials. Concealed mounting screw holes. Integrated switch guards prevent accidental switching. UV tested faceplate. Rugged UV rated waterproof boots. Panel can be mounted in four different orientations. Illuminated circuit labels provide visibility in low light conditions. Bi-colored LED's. Panel cumulative rating of 45 amperes. Positions: 4, Color: Gray, Size: 4.3" H x 3.88" W
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Yellow polycarbonate. Spring loaded. For weatherproofing old style 26CM10 receptacle. Meets the most stringent requirements of UL's three listing categories for weatherproof plates. Stainless steel screws and neoprene gasket included for mounting to FS/FD type weatherproof boxes. Description: Fits Old Style 26CM10 Receptacle Sold: Each
|
|
462-69-7420CR Yellow LEXAN with lift lid. Fits 15A, 20A, & 30A single receptacles. Fits 5261CR, 5361CR, 205CRR, 305CRR and 5262CR.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Compact Grey nylon panel mount inlet ideal for bass boat battery charging connection. Has gasketed spring-loaded lift cover for weatherproofing front and neoprene boot for weatherproofing rear. Will accept both 15A 125V and 20A 125V 2 pole, 3 wire straight blade connector bodies. 15 Amp 125 Volt. : Sold: Each
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> For ground fault receptacles and stylized receptacles. For vertical mounting in standard or FS/FD type boxes. PVC. Color: White Sold: Each
|
|
462-354-1991211 Type: Light Duty, Length: 8', Work Load: 550 Sold: Each
|
|
462-354-1991221 Type: Heavy Duty, Length: 8', Work Load: 880 Sold: Each
|
|
462-354-2274621 A: 11 1/2", B: 10", C: 5", D: 1", Fastener: #10RH
Sold: Each
|
|
110-112002 Daytona Sensors WEGO III Wide-Band Air / Fuel Ratio Tuning Gauge
- Complete air/fuel ratio metering system with built-in data logging. Includes WEGO III unit shown above, Bosch LSU4.2 5-wire wide-band oxygen sensor, 18x1.5mm weld nut for mounting sensor on exhaust pipe, and software on CDROM
- Versatile tuning aid for all carbureted and fuel injected engines displays air/fuel ratio (AFR) and logs over 2 hours data including AFR, engine RPM, and a spare 0-5V analog input for sensors such as throttle position or manifold pressure
- Can be used for on-road or dyno testing
- Suitable for automotive, motorcycle, and other small engine applications
- Highly accurate with less than ±0.10 AFR error over 10.3 - 19.5 AFR range
- Easy free-air calibration procedure corrects for sensor aging effects
- 0-5V analog AFR output for interface to dyno instrumentation
- Ultra-bright daylight readable blue LED display with automatic dimming under low light conditions
- Wide supply voltage range from 11-16V allows operation from battery on small engines or race vehicles without an alternator. Current draw is approx. 1 amp
- Built-in USB interface
- Fully encapsulated with water-proof LED display
- Compact size: 4" L x 2" W x 0.5" H
|
|
462-70-W12 Zinc Plates w/Straps
Size: 12" L x 3" W x 1-1/4" T", Material: Zinc
Sold: Each
|
|
462-354-192940 Formed hot dipped galvanized
|
|
615-4007 Weld-In Breather Extension Kit
- Available: (1) One
- -16 thread size
|
|
450-12100 Weldon "long" 100 micron filter / assembly
Weldon Billet Fuel Filters are manufactured with the same exacting specifications and stringent quality requirements as our Racing Fuel Pumps. Weldon's Premium Filter media whether replaceable, paper cellulose or cleanable, stainless steel protects Carburetors and Injectors from contamination.
Features:
- 100 Micron Stainless Steel filter for use before the 600-A and any other manufactures' fuel pump
- 40 Micron paper cellulose filter for use before Weldon Billet and Cast Bodied pumps
- 10 Micron paper cellulose filter for use after all fuel pumps
- Over 60 sq. in. of filtering area
- -12 AN O-ring ports, 10 AN O-ring ports, 8 AN O-ring ports
- Radiused end caps to improve fuel flow within filter
- 6.75" Long x 2.38" Dia.
- Black/Gold Bright Dipped Anodized for a long lasting high-performance finish
- Minimal pressure drop
|
|
450-2040-281-A-120 Bypass Fuel Regulator- up to 120 psi Provides a fast response rate, for stable fuel delivery, for the most demanding requirements. These regulators maintain steady fuel delivery duringdramatic changes in fuel demand, such as WOT conditions, boostapplication and gear changes. Hardened steel ball, replaceable steel seat, and Fluorosilicone diaphragm. Compatible with most racing fuels including ethanol and methanol. Fuel pressure increases on a 1:1 ratio with boost. User serviceable, replaceable, and interchangeable internal components. - .281" bypass orifice
- 1/8" NPT Gauge Port
- 1/8" NPT manifold pressure reference port
- (2) -10 pressure ports
- -8 return port
|
|
