450-600A Weldon 55-80 GPH Inline Fuel Pump
- 55-80 GPH/0-95 PSI
- -10 inlet and outlet
- Leak free O-Ring ports
Weldon has upgraded the 600-A flow-through continuous-duty fuel pump with -10 inlet and outlet ports and fitted it with revised end caps. Its bigger ports allow the pump to draw more fuel, to deliver more fuel, and to do this at reduced amperage draw. The new 600-A is distinguished by its black colored end-caps. Designed for up to 600 to 700 horsepower (fuel injected) or 800 horsepower (carbureted). At 42 PSI (most common EFI setting) the 600-A delivers more than 72 GPH with fewer than a 5 amp draw.
NOT USCG APPROVED
|
|
This Part has options, please click the button below to order.
542-14129CN 14129CN Westerbeke Heat Exchanger Same as (Sendure # 1279-1) 3x11-1/2 with cupro nickel (CuNi) core. (Sendure # 1279-1) 3x11-1/2 core. 11966 Westerbeke Heat Exchanger Sendure 1279-1 is an obsolete part number. It has been replaced with 14129. It is also Sendure 1380-1-5 or 1380-1-7.
|
|
This Part has options, please click the button below to order.
542-21903CN 21903CN Westerbeke Heat Exchanger (Sendure #2729-3-5) with cupro nickel (CuNi) core. Westerbeke W60 Propulsion / WPDS-20 Generator W-60 Cooling System. * * * Customer Casting Required. * * *
|
|
This Part has options, please click the button below to order.
542-24308CN 24308CN Westerbeke Heat Exchanger with cupro nickel (CuNi) core for Gen Set. 24308 has been replaced by 36899 for the W70 engine and 36905 for the W52 engine.
|
|
This Part has options, please click the button below to order.
542-24774CN 24774CN Westerbeke Heat Exchanger Gen Set, with cupro nickel (CuNi). Westerbeke W 13/18/21/27/33 Propulsion 4.4/6/7.7/8/11/12.5 KW 13-21-27-33 Flowcontroller Westerbeke W 13/18/21/27/33 Propulsion 4.4/6/7.7/8/11/12.5 KW 13-21-27-33 Cooling System.
|
|
This Part has options, please click the button below to order.
542-32318 CN 32318CN Westerbeke Heat Exchanger. Westerbeke 70-100 / 25-32KW Westerbeke 100 - Sea Water System and Alternator Westerbeke 70-100 / 25-32KW Westerbeke 100 - Fresh Water Cooling System – Rear.
Same as 36890CN.
|
|
This Part has options, please click the button below to order.
542-34790CN 34790CN Westerbeke Heat Exchanger. Used on Westerbeke 46 / 15.0 BTD - 60 Hz / 12.0 BTD - 50 Hz Cooling System. 3" Diameter x 16" long.
Replaced by Westerbeke 36898.
|
|
This Part has options, please click the button below to order.
542-35135CN 35135CN Westerbeke Heat Exchanger Gen Set w/ mounts. Use on Westerbeke W 13/18/21/27/33 Propulsion 4.4/6/7.7/8/11/12.5 KW BT-8KW Generator- Cooling System AND Westerbeke 35B Three / 38B Four / 42B Four Generator - Cooling System.
Same as Westerbeke 36903.
|
|
This Part has options, please click the button below to order.
542-35236CN 35236CN Westerbeke Heat Exchanger 2" x 16" w/ mounts. Used on Westerbeke W 13/18/21/27/33 Propulsion 4.4/6/7.7/8/11/12.5 KW BC-4.4KW Generator- Cooling System.
Same as Westerbeke 36904.
|
|
This Part has options, please click the button below to order.
542-35264CN 35264CN Westerbeke Heat Exchanger 2" x 16 1/8" w/ mounts.
|
|
This Part has options, please click the button below to order.
542-36889CN 36889CN Westerbeke Heat Exchanger 3" x 19" w/ mounts for W70 engine.
|
|
This Part has options, please click the button below to order.
542-36890CN 36890CN Westerbeke Heat Exchanger. Westerbeke 70-100 / 25-32KW Westerbeke 100 - Sea Water System and Alternator: Westerbeke 70-100 / 25-32KW Westerbeke 100 - Fresh Water Cooling System – Rear.
Same as Westerbeke 32318CN.
|
|
This Part has options, please click the button below to order.
542-36895CN 36895CN Westerbeke Heat Exchanger 3 KW 2" x 14-1/2" used on Westerbeke 10TWO / 3KW Cooling System.
|
|
This Part has options, please click the button below to order.
542-36897CN 36897CN Westerbeke Heat Exchanger 3" Diameter x 16" long. For Westerbeke Gasoline Generator models:
8.0TWG, 11.0TWG.
Replaces Westerbeke 36897CN and 34644CN.
|
|
This Part has options, please click the button below to order.
542-36898 CN 36898CN Westerbeke Heat Exchanger Gen Set 12KW w/ mounts used on Westerbeke 46 / 15.0 BTD - 60 Hz / 12.0 BTD - 50 Hz Cooling System.
Replaces Westerbeke 34790CN.
|
|
This Part has options, please click the button below to order.
542-36899CN 36899CN Westerbeke Heat Exchanger 18 21A 27A 33A 38A w/ mounts, cupro nickel (CuNi) core. Westerbeke 35B Three / 38B Four / 42B Four Propulsion - Cooling System: Universal 44A 44B 12.5 BTDB-60 9.4 BTDB-50 15.0 BTDC-60 12.0 EXHAUST MANIFOLD & HEAT EXCHANGER - 44A/B: Westerbeke 35C 35D 8.0 BTDA-60 6.0 BTDA-50 10.0 BTDA-60 7.5 B EXHAUST MANIFOLD & HEAT EXCHANGER - 35C/D Replaces 24308 for W70 Engine.
|
|
This Part has options, please click the button below to order.
542-36900CN 36900CN Westerbeke Heat Exchanger 2" Diameter; 17-1/2" long w/ mounts.
|
|
This Part has options, please click the button below to order.
542-36902CN 36902 Westerbeke Heat Exchanger for Westerbeke Gasoline Generator models:
8.5BTG, 8.5BTGA, 12.5BTG, 15.0BTG, 15.0BTGA.
Can be used to replace Westerbeke 36902.
|
|
This Part has options, please click the button below to order.
542-36903CN 36903CN Westerbeke Heat Exchanger Gen Set 3" Diamter x 16" long w/ mounts. Used on Westerbeke 35B Three / 38B Four / 42B Four Generator - Cooling System.
Same as Westerbeke 35135CN.
|
|
This Part has options, please click the button below to order.
542-36905CN 36905CN Westerbeke Heat Exchanger with cupro nickel (CuNi) core, used on W52 Generator.
Replaces 24308 for W52 Engine.
|
|
