462-232-AHJ8VDP This high-tech, high-speed, one piece design features an innovative Rod and Slot lift system to handle the stresses from the heaviest and most powerful V6 outboards on the market. All hydraulics are built into the jack, eliminating the installation of pumps and reservoirs inside the transom as well as hydraulic hoses running through the transom. The high-tech engineered polymer rods are 6 times more abrasion resistant than steel and are manufactured from self-lubricating material. Lifts from top to bottom in 8 seconds and installs in half the time of comparable jacks. Handles all outboards including the powerful Verado V6 motors. Setback: 8"
|
|
462-232-AHJM4DP "The smallest and lightest hydraulic jack on the market is ideal for shallow water skiffs and flats boats. It has a footprint of only 14-5/8" W x 11-1/2" H with a weight of only 23 lbs. The strong, self-contained actuator takes only 8 seconds to go from top to bottom and has 5" of travel. 3 mounting hole options on the transom side and 2 on the engine side. Optional adapter available to accommodate clamp-on outboard motors if needed." "The smallest and lightest hydraulic jack on the market is ideal for shallow water skiffs and flats boats. It has a footprint of only 14-5/8" W x 11-1/2" H with a weight of only 23 lbs. The strong, self-contained actuator takes only 8 seconds to go from top to bottom and has 5" of travel. 3 mounting hole options on the transom side and 2 on the engine side. Optional adapter available to accommodate clamp-on outboard motors if needed." Setback: 4", Application: 115hp Sold: Each
|
|
462-232-FAGK1SSDP "Digital LED position gauges fit Atlas hydraulic jack plates. Numbers range from 0-20 and each number indicates a 1/4" rise. Atlas jack plates are predrilled to accept sensors." Fits: 4" and 8" Models", Color: Black w/SS Bezel
|
|
462-232-FAGK2DP "Digital LED position gauges fit Atlas hydraulic jack plates. Numbers range from 0-20 and each number indicates a 1/4" rise. Atlas jack plates are predrilled to accept sensors." Fits: 6", 10" and 12" Models", Color: Black w/Black Bezel
|
|
462-232-FAGK2SSDP "Digital LED position gauges fit Atlas hydraulic jack plates. Numbers range from 0-20 and each number indicates a 1/4" rise. Atlas jack plates are predrilled to accept sensors." Fits: 6", 10" and 12" Models", Color: Black w/SS Bezel
|
|
462-232-NBH31SSCOPT
- Shaped inserts fit both Optima®D27M and D31M series
- Rugged poly tray with 8 mounting slots
- Poly strap with stainless steel buckle
- Resistant to UV and corrosion
|
|
462-232-BK1DP "Bolt kit for mounting outboard engine to jack plates. Kit contains:
- 4 each 1/2"-13 x 3" long bolts - stainless steel
- 4 each 1/2"-13 lock nuts - brass with nylon insert
- 8 each 1/2"-flat washers - stainless steel
"" - 4 each 1/2"-13 x 3" long bolts - stainless steel
- 4 each 1/2"-13 lock nuts - brass with nylon insert
- 8 each 1/2"-flat washers - stainless steel
" : Sold: Pack
|
|
462-232-TH1290CPDP High quality UV and chemical resistant virgin polypropelene. Features a finished head and a single pass around nut. A: 1-7/8", B: 3-1/2", C: 1-1/8", D: 1-1/8", E: 1-3/8", Pack: Carded Sold: Each
|
|
462-232-TH1590CPDP High quality UV and chemical resistant virgin polypropelene. Features a finished head and a single pass around nut. A: 2-7/8", B: 4-1/4", C: 1-5/8", D: 1-1/2", E: 2", Pack: Carded Sold: Each
|
|
462-232-TH7590CPDP High quality UV and chemical resistant virgin polypropelene. Features a finished head and a single pass around nut. A: 1-1/2", B: 2-1/2", C: 1", D: 3/4", E: 1", Pack: Carded Sold: Each
|
|
462-232-BSR1KDP "Distributes strain from bends in the hose. Watertight gripper fitting-no leaks. Flange is 2-3/4" diameter and requires 1-1/4" installation hole." : Sold: Each
|
|
462-232-CB4DP Provides a fully open area to pass wiring and cables through and when rigging is complete. Constructed of rugged black vinyl that resists UV rays, gasoline and oil. Description: 4-1/2" Cable Boot", Pack: Card Sold: Each
|
|
462-232-CS1DP Molded, UV and weather resistant. Color: Black, Size: 9/16" x 1-7/8", Pack: 2, Case: 12 Sold: Pack
|
|
462-232-CS2DP Molded, UV and weather resistant. Color: White , Size: 9/16" x 1-7/8", Pack: 2, Case: 12
|
|
462-232-CSS1DP Molded, UV and weather resistant. Color: Black , Size: 7/16" x 7/8", Pack: 2, Case: 12 Sold: Pack
|
|
462-232-CSD92DP - The check ball provides better sealing against reverse water flow that occurs when backing boat.
- Injection molded part is high strength and UV stabilized to provide value and durability
- Top of cockpit scupper drain is removable for cleaning
- 90° Outlet
Hole: 2-1/2" dia., Flange: 3-9/16", Fits: 1-1/2" Hose - The check ball provides better sealing against reverse water flow that occurs when backing boat.
- Injection molded part is high strength and UV stabilized to provide value and durability
- Top of cockpit scupper drain is removable for cleaning
- 90° Outlet
|
|
462-232-DP1DP A screw-type plug made of black nylon and features an O-ring for tight sealing. Fine thread insures sealing under high vibration and prevents cross threading. Mounts in a 1" diameter hole. Black nylon. Color: Black, Material: Nylon, Case: 12 A screw-type plug made of black nylon and features an O-ring for tight sealing. Fine thread insures sealing under high vibration and prevents cross threading. Mounts in a 1" diameter hole.
|
|
462-232-DBH27PDP "Holds two Series 27 deep cycle batteries side by side. Patented poly strap with quick release buckle. Meets all NMMA specs for battery retention. 14-1/2" L x 13-1/8"W x 1" H."
Description: Dual Battery Holder, Fits: Group 27
Sold: Each
|
|
462-232-MAGHL2DP
- Powerful magnetic attraction
- Holds lids and doors securely
- Encased in plastic ? won't rust or corrode
|
|
462-232-LEDSMSLC6WT Mounting channel for Flex Rope LED rope lighting. Includes hi-strength 3M adhesive back mounting tape.
Description: Channel Mount, adhesive backed, Length: 6'
Sold: Each
|
|
