Generic

TAILLIGHT OVER-80" SUBM LEFT

Wesbar Submersible Over 80" Taillights are for use on boat and PWC trailers more than 80" wide and feature gasketed lenses which protect bulbs and contacts when submerged. They are pre-wired and when properly mounted meet all DOT-108 requirements.

Features:
• Size: 6.29" x 4.66" x 3-3/4"
• Color: Red
• 8 Function, left hand/drivers side

TAILLIGHT OVER-80" SUBM RIGHT

Wesbar Submersible Over 80" Taillights are for use on boat and PWC trailers more than 80" wide and feature gasketed lenses which protect bulbs and contacts when submerged. They are pre-wired and when properly mounted meet all DOT-108 requirements.

Features:
• Size: 6.29" x 4.66" x 3-3/4"
• Color: Red
• 7 Function, right hand/curb side

TAILLIGHT UNDER-80" COMBO LEFT

Wesbar Under 30" Combination Taillights feature universal 2" center stud mounting and screw-on main and side marker lenses to allow for easy bulb replacement. They include quick connect/disconnect wiring and meet FMVSS/CMVSS 108 requirements.

Features:
• Size: 5.13" x 4.59" x 2.87"
• Color: Red
• 7 Function, left hand/drivers side

TAILLIGHT UNDER-80" COMBO RIGHT

Wesbar Under 30" Combination Taillights feature universal 2" center stud mounting and screw-on main and side marker lenses to allow for easy bulb replacement. They include quick connect/disconnect wiring and meet FMVSS/CMVSS 108 requirements.

Features:
• Size: 5.13" x 4.59" x 2.87"
• Color: Red
• 6 Function, right hand/curb side

TAILLIGHT UNDER-80" SUBM RIGHT

Wesbar Submersible Under 80" Taillights are for use on boat and PWC trailers less than 80" wide and feature gasketed lenses which protect bulbs and contacts when submerged. They are pre-wired and when properly mounted meet all DOT-108 requirements.

Features:
• Size: 5-1/4" x 4.66" x 3-3/4"
• Color: Red
• 6 Function, right hand/curb side

Take apart hinge

Take-Apart Hinge Right SS

The Seadog Take-Apart Hinges have an investment cast 316 stainless steel construction.

• Size: (A) 3-1/2" (B) 1-3/4" (C) 1-3/4" (D) 2" (E) 3/16"
• Side: right
• Fastener: #10 FH
• 2 per package

Type: Right, A: 3-7/8", B: 1-15/16", C: 1-15/16", D: 2", E: 3/16"

Type: Right, A: 1-1/2", B: 3/4", C: 3/4", D: 2-3/4", E: 1/16"

Description: 6" Setback Bracket for Transom Mt. Application

"Plastic coated straps resist corrosion, while insuring a secure installation of tank. Includes:
(8 each) 22"L Tank Cradle Metal Straps
(2 each) 1/4"-20 x 3" Fully Threaded Hex Head Bolt
(8 each) 1/4"-20 x 1/2" Phillips Head Cap Screw
(10 each) 1/4"-20 Nylock Nut
(4 each) #14 x 1-1/4" Phillips Button Head Screw"

:

Sold: Each

Below deck tank mounting strips. Self-adhesive mounting strips cushion between the tank and the hull and provide room for circulation. Can be used for topside tanks as well.
Closed Cell Poly Foam Construction
Can also be used for padding with hold down straps

• Closed Cell Poly Foam Construction


• Can also be used for padding with hold down straps

Size: 2" x 30" x 1/4", Color: Black, Bag: 2

Sold: Bag

The Quick Connect system can be used by anyone to install additional outlets or to replumb your boat or recreational vehicle. Whale Quick Connect fittings offer many benefits, all ensuring a high integrity plumbing system. The pipework's flexibility enables tight bends to be formed, hence reducing both the number of fittings and time required at installation. Whale Quick Connectsemi-rigid pipework offers the integrity of metal, but the usability of plastic, and is fully tested and recommended for use with the complete range of Whale fittings.

• Unique ?Double Gripper' design provides secure lifelong pipework retention even at excessive pressures


• The innovative ?cage collet' eliminates leaks where fittings are installed close to tight bends


• Collet has internal support ring ensuring o ring seal is held in position and does not distort or leak under pressure


• High integrity single piece moulding improves the strength of the fittings


• Outer sleeve incorporates collet cover, thus preventing accidental pipework release


• Collet clips are not necessary and therefore reduce installation time


• Pipework includes measured cut marks, designed to be a visual guide to ensure that fittings are pushed fully home

• Unique 'Double Gripper' design provides secure lifelong pipework retention even at excessive pressures


• The innovative 'cage collet' eliminates leaks where fittings are installed close to tight bends


• Collet has internal support ring ensuring o ring seal is held in position and does not distort or leak under pressure


• High integrity single piece moulding improves the strength of the fittings


• Outer sleeve incorporates collet cover, thus preventing accidental pipework release


• Collet clips are not necessary and therefore reduce installation time


• Pipework includes measured cut marks, designed to be a visual guide to ensure that fittings are pushed fully home

Description: "Tap Tail Adapter 1/2" BSP Male"

Sold: Each

Seam tape with (PSA) pressure sensative adhesive.

Size: 2" x 125'

Seam tape with (PSA) pressure sensative adhesive.

Size: 4" x 125'

Hull Plate - Zinc

Size: 14" L x 1-1/4" T ", Material: Zinc

Sold: Each

Hull Plate - Zinc

Size: 9" L x 1-1/8" T ", Material: Zinc

Sold: Each

Attaches inline to your hose to improve the taste and smell of your drinking water for up to 120 days. Filters down to 150 microns. Also eliminates water spots on fiberglass when used for wash down.

Case: 6

Sold: Each

Pack: 2

Extend the life of your boat cover by preventing water from pooling on top. Includes a non-marring tip on each end of the telescoping aluminum pole and a durable plastic adjustment knob for easy height adjustment.

Length: 37"-70"

Sold: Each