Generic

Convenient hose barb design
Made of forged brass
Connects permanent tank to a single motor NOT TO BE USED IN POTABLE WATER SYSTEMS.

• Convenient hose barb design


• Made of forged brass


• Connects permanent tank to a single motor

Size: 3/8" Barb x 1/4" NPT"

Sold: Each

The Quick Connect system can be used by anyone to install additional outlets or to replumb your boat or recreational vehicle. Whale Quick Connect fittings offer many benefits, all ensuring a high integrity plumbing system. The pipework's flexibility enables tight bends to be formed, hence reducing both the number of fittings and time required at installation. Whale Quick Connectsemi-rigid pipework offers the integrity of metal, but the usability of plastic, and is fully tested and recommended for use with the complete range of Whale fittings.

• Unique ?Double Gripper' design provides secure lifelong pipework retention even at excessive pressures


• The innovative ?cage collet' eliminates leaks where fittings are installed close to tight bends


• Collet has internal support ring ensuring o ring seal is held in position and does not distort or leak under pressure


• High integrity single piece moulding improves the strength of the fittings


• Outer sleeve incorporates collet cover, thus preventing accidental pipework release


• Collet clips are not necessary and therefore reduce installation time


• Pipework includes measured cut marks, designed to be a visual guide to ensure that fittings are pushed fully home

• Unique 'Double Gripper' design provides secure lifelong pipework retention even at excessive pressures


• The innovative 'cage collet' eliminates leaks where fittings are installed close to tight bends


• Collet has internal support ring ensuring o ring seal is held in position and does not distort or leak under pressure


• High integrity single piece moulding improves the strength of the fittings


• Outer sleeve incorporates collet cover, thus preventing accidental pipework release


• Collet clips are not necessary and therefore reduce installation time


• Pipework includes measured cut marks, designed to be a visual guide to ensure that fittings are pushed fully home

Description: Shut off Valve Plastic 15mm

Sold: Each

Provides a waterproof side entry for antenna cables without requiring removal of the factory installed connector. Stainless steel dress cap conceals mounting hardware and matches stainless steel deck fittings.

• Simple one-piece design for easy side mount installations
• Low profile, contoured edge reduces the risk of tangling lines
• A polished stainless steel dress cap conceals mounting hardware, matches other deck hardware and offers protection from UV
• Includes all fasteners
• For use above the waterline only

Injection molded polycarbonate/stamped stainless steel.

Type: Starboard, Size: 2-7/8" H"

Sold: Each

SIDE LIGHT WTRPRF EAR MNT AMB

Wesbar Waterproof Side/Clearance Lights are constructed of heavy duty polycarbonate and are equipped with a light bulb sealed in the compartment with 15' of lead wire. These lights do not include a reflector.

• Size: 3-1/2" x 1-3/16"
• 3-5/16" Center mounting holes

Housing: Black, Mount: Vertical, Size: 3-1/2" L x 2-1/4" W x 7/8" H , Pack: 2

Stamped 304 stainless. Light arc is 10 pts., 112.5°. port and starboard.

Size: 7-3/4" x 2-5/16", Fastener: #4 RH, Box: 1 pair, Pack: Bulk

Sold: Box

USCG certified for use on power vessels under 20 meters (65.6 ft.). 2-mile visibility. Chrome plated zinc alloy top with black plastic base and gold plated contacts. Horizontal mount. Screw size is 8.

Housing: Chrome, Size: 3-1/4" L x 2-5/16" W x 5/8" H ", Card: 2

Sold: Pack

Stamped 304 stainless steel. Light arc is 10 pts., 112.5?. 1 pair per box (port-Red and starboard-Green).

Size: 1-3/8" H x 2-5/16" dia.", Fastener: #4 RH, Box: 1 pair, Pack: Bulk

Sold: Box

"Gaskets on both rear and side lens. Grounds through mounting studs. Features include stop, turn, tail, rear clearance, rear & side reflex, side marker and license plate illuminator (L suffix only). Mounts on 2" centers and includes mounting hardware. 5-3/4" x 4-1/2" x 2-7/8"."

Description: Side marker lens, red

Sold: Each

Side Mount Deck Hinge, 2-Hole Stainless. Each

Description: Stainless 2-Hole, Base: 2" x 7/8", Pin: 1/4", Case: 10

Side Mount Deck Hinge, 4-Hole Stainless. Each

Description: Stainless 4-Hole, Base: 2-13/16" x 1-7/8", Pin: 5/16", Case: 10

Features single lever/dual action design. Compact construction is perfect for sailboats and other applications where space is at a premium. Drop-in replacement for NW, Onan, TX, Vetus, Volvo and other controls.

Injection molded nylon.
Packed 2 per card.

Colors: Black or White
Base: 2-1/4"L x 7/8"W"
Base: 2-1/4"L x 1"W"
Pin: 1/4"
Pack: 2
Case: 10
Sold: Pack

Setback: 4"

Setback: 6"

Setback: 8"

Setback: 10"

Mount in the lowest part of bilge to secure the intake line. Strainers are valuable in minimizing intake of debris. Supplied with non-return valves.

Description: Side Entry, Size: 6-11/16"L x 4-11/16" W x 2-1/2" H"

Sold: Each

Stud mount. Grounds through mounting stud. Single wire for electrical connection. Features 15,000 hour long-life bulb.

Lens: Amber, Mount: Stud, Size: 2-3/4" x 2-1/8" x 1"

Sold: Each