462-6-172550003P See Jabsco Impeller Cross Reference and Impeller Identification Guide for impeller silhouettes and drive types. Fig.: D, Type: Nitrile, Blades: 6, Size: 1-9/16", Shaft: 1/4" Sold: Each
|
|
462-354-5200215 "Molded nylon. Designed to fit securely in a 1" hole without the use of fasteners. The ridges on the body of the drain plug are designed to keep the plug in place. Sealant should be applied prior to installation to make a watertight seal." Description: Replacement Plug & Gasket, Pack: 30 Sold: Each
|
|
462-177-14249 Replacement Plug Description: Plug w/Lead, Size: 6" Sold: Each
|
|
462-36-M4100P12 Yellow Zytel® super tough nylon watertight plug has gasketed locking ring to make plug/receptacle interface watertight. Cord grip range is 1.00?1.94 in. (25.4?49.3).
Rating: 100A 125/250V, Description: 3 Pole, 4 Wire Grounding
Sold: Each
|
|
462-36-M5100P9 Yellow Zytel® super tough nylon watertight plug has gasketed locking ring to make plug/receptacle interface watertight. Cord grip range is 1.00?1.94 in. (25.4?49.3).
Rating: 100A 120/208V, Description: 4 Pole, 5 Wire Grounding
Sold: Each
|
|
464-520021-1 Replacement Plug & Gasket
The Seadog Replacement Drain Plug and Gasket is made of injection molded nylon.
|
|
462-354-520021 Replacement parts for 520010 & 520020 series drain plugs. Description: Replacement Plug & Gasket, Pkg.: Bulk Sold: Each
|
|
462-354-5200211 Replacement parts for 520010 & 520020 series drain plugs. Description: Replacement Plug & Gasket, Pkg.: Card, Pack: 2 Sold: Pack
|
|
464-520041-1 REPLACEMENT PLUG F/520040-1
The Seadog Garboard Drain and Plug is constructed of machined bronze and has 1/2"NPT thread size.
|
|
462-354-520041 "Has a flange diameter of 2". Pipe size is 1/2". Fastener is #8 FH. Bronze." Description: Replacement Plug , Thread: 1/2" NPT ", Pkg.: Bulk Sold: Each
|
|
462-354-5200411 "Has a flange diameter of 2". Pipe size is 1/2". Fastener is #8 FH. Bronze." Description: Replacement Plug, Thread: 1/2" NPT", Pkg.: Card Sold: Each
|
|
462-23-114046 This durable lock set is a complete replacement kit for your pontoon's gate latch. Universal sizing fits square frames of 1", 1-1/8", and 1-1/4" on both left- and right-hinged gates. Secure closure stabilizes gate and prevents inward swinging. Includes mounting hardware for quick and easy installation. Fits: 1", 1-1/8" & 1-1/4" square frame
|
|
462-194-CMPNAD Replacement Prop Nut Anode
Size: D, Length: 2.95", Shaft: 1-1/4", Material: Aluminum
Sold: Each
|
|
462-194-CMPNZB Replacement Prop Nut Anode
Size: B, Length: 2.05", Shaft: 7/8", Material: Zinc
Sold: Each
|
|
462-194-CMPNZD Replacement Prop Nut Anode
Size: D, Length: 2.95", Shaft: 1-1/4", Material: Zinc
Sold: Each
|
|
462-354-4001611 For 400160, 400165 and 400170, Red & Green.
Description: Replacement lens, Red and Green, Pack: 1 pr.
Sold: Pack
|
|
420-460116 Replacement Screen, Gil /Hardin Style Sea Strainer Lid
Replacement screen, for a Gil style sea strainer lid, with 3/8" hole. Designed to fit Gil Generation 2 (Single Knob) and Hardin Offshore Generation 1 Sea Strainers.
|
|
462-9-043200112V 12 volt sealed beam unit.
Description: 12V, 35 Watts, Size: Spare Sealed Beam Unit, Amps: 3
Sold: Each
|
|
462-232-RS3DP Solid cast aluminum. Welds to lower unit. Easily cut to shape. Application: Bombardier, Evinrude, Johnson, OMC, Yamaha V4 Outboards (40-80 HP), A: 4", B: 4-1/4", C: 7-1/2", D: 7"
|
|
462-232-RS2DP Solid cast aluminum. Welds to lower unit. Easily cut to shape. Application: Bombardier, Evinrude, Johnson, OMC, Yamaha V4 Outboards (85 to 140 HP), A: 4-1/2", B: 5-3/4", C: 9-1/2", D: 10"
|
|
