Generic

Replacement Impeller for Crank Driven Water Pump

"Fits many diesel engines
Self exciting internal regulator
Negative ground
1-wire connection
Single groove pulley
2" mounting foot"

Description: 12 Volt, 61 Amp

Sold: Each

"Chrome plated zinc. Padlock eye swivels to act as latch. Padlock clearance is 11/32". Screw size is 6."

Size: Spare Keeper

Sold: Each

Replacement Lanyard

Description: Replacement Floating Lanyard

Sold: Each

Lanyard for emergency engine cut-off switch. Kills ignition when lanyard is pulled. For use with conventional or magneto ignitions. Seals out moisture and makes reconnection easier.

Fits: BRP, Replaces: 432230

Sold: Each

Lanyard for emergency engine cut-off switch. Kills ignition when lanyard is pulled. For use with conventional or magneto ignitions. Seals out moisture and makes reconnection easier.

Fits: BRP/OMC 1996+newer, Replaces: 176288

Sold: Each

Lanyard for emergency engine cut-off switch. Kills ignition when lanyard is pulled. For use with conventional or magneto ignitions. Seals out moisture and makes reconnection easier.

Fits: Johnson/Evinrude, OMC 1995-older, Replaces: 432230

Sold: Each

Lanyard for emergency engine cut-off switch. Kills ignition when lanyard is pulled. For use with conventional or magneto ignitions. Seals out moisture and makes reconnection easier.

Fits: Johnson/Evinrude, OMC Sterndrive/Cobra, Replaces: 398602

Sold: Each

Lanyard for emergency engine cut-off switch. Kills ignition when lanyard is pulled. For use with conventional or magneto ignitions. Seals out moisture and makes reconnection easier.

Fits: Yamaha, Replaces: 682-82556-00-00

Sold: Each

Replacement LED Insert for #680-211M and #730-LEDPUBL - NEWER Style

These inserts fit the 210-M and 211-M LED Pop-Up Bow Lights. Due to design changes throughout the years, there are two different inserts, and they are NOT interchangeable. The older style is no longer available. PLEASE DOUBLE CHECK WHICH INSERT YOUR LIGHT TAKES BEFORE ORDERING.

"Lights exceed DOT requirements for stop, tail, turn signal, rear and side reflex, side marker light and license illuminator (L suffix only). E440L measures 4-1/2" x 5" x 2-7/8"."

Description: Red Lens only

Sold: Pack

Removes contaminants introduced into the air from both outside and inside the vessel. Sand, salt, carpet fibers and other contaminants are trapped in the oil-impregnated Vaporloc filter media. Turbo noise is reduced by the unique design of the air filter/silencer housing. Contains a washable media and is ruggedly built to provide an extended service life.

:

Sold: Each

• Hardcoated Intake.
• Replacement for Merc# 849901A1.
• Includes gaskets, O-ring, and stainless steel studs.

See Jabsco Impeller Cross Reference and Impeller Identification Guide for impeller silhouettes and drive types.

Fig.: O, Type: Neoprene, Blades: 9, Size: 3-3/4", Depth: 2-1/2", Drive Type: 7

Sold: Each

See Jabsco Impeller Cross Reference and Impeller Identification Guide for impeller silhouettes and drive types.

Fig.: F, Type: Neoprene, Blades: 10, Size: 1-19/32", Depth: 3/4", Drive Type: 4

Sold: Each

See Jabsco Impeller Cross Reference and Impeller Identification Guide for impeller silhouettes and drive types.

Fig.: M, Type: Neoprene, Blades: 8, Size: " 2-9/16", Depth: 2", Shaft: 5/8"

Sold: Each

See Jabsco Impeller Cross Reference and Impeller Identification Guide for impeller silhouettes and drive types.

Fig.: M, Type: Neoprene, Blades: 8, Size: 2-9/16", Depth: 1-7/16", Drive Type: 7

Sold: Each

See Jabsco Impeller Cross Reference and Impeller Identification Guide for impeller silhouettes and drive types.

Fig.: B, Type: Neoprene, Blades: 8, Size: 1-1/4", Depth: 15/32", Drive Type: 4

Sold: Each

See Jabsco Impeller Cross Reference and Impeller Identification Guide for impeller silhouettes and drive types.

Fig.: Y, Description: Impeller, Type: Neoprene, Blades: 10, Size: 2-9/16", Depth: 2"

Sold: Each