462-6-118600005 This electrically activated clutch pump features a bronze body with a brass insert and offers all the benefits of flexible impeller pumps with substantial flow rate and horizontally oriented ports. The electric clutch offers convenient remote activation. Equipped with mechanical clutch engagement screws in case of electrical failure. Good for pumping bilges, washdowns, circulating water in bait tanks, or as a utility dock-side pump. Stainless shaft, carbon-ceramic mechanical seal, twin row ball bearings. 2-A belt. Do not run dry. GPM figures are based on running at 1750 RPM. GPM: 23, Impeller: Nitrile, Ports: 1", Volts: 12, Amps: 4
|
|
462-6-432100001 Replacement for stock cast-iron, plastic and aluminum composite water pumps. Made of bronze and stainless steel. Withstands harsh, corrosive marine environments. Left or Right hand rotation. One piece bronze body. Bronze end plate. Replaceable cam and wearplate. Pulley driven. Takes impeller 179540001P. Description: MerCruiser 46-72774-A32, Ports: 1-1/4" Barb" Sold: Each
|
|
462-762-P1710C Impeller Kit: 17000K
Minor Repair Kit: 25123
Major Repair Kit: 25121 Engine: Caterpiller 3116, Note: Sold w/o port elbows Sold: Each
|
|
462-762-P1732C Impeller Kit: 17000K
Minor Repair Kit: 25123
Major Repair Kit: 25121 Engine: Caterpiller 3126, Note: Sold w/o port elbows Sold: Each
|
|
462-762-P1716C - Impeller Kit: 17000K
- Minor Repair Kit: 25124
- Major Repair Kit: 25122
Engine: Cummins 8.3 Litre 6BT/6C TA8.3-M, OEM #: 3922590, 396476, Inlet: 2", Outlet: 1-3/4" Sold: Each
|
|
462-11-CB41100 White handle push button circuit breaker.
- Replacement for popular panel mounted breakers
- Mounts in 3/8" hole
- White push buttons for DC, black for AC
Amps: 3 Sold: Each
|
|
462-11-CB41210B Push Button Circuit Breaker, 10 Amp, Black
- Replacement for popular panel mounted breakers
- Mounts in 3/8" hole
- White push buttons for DC, black for AC
|
|
462-11-CB41210 Push Button Circuit Breaker, 10 Amp, White " - Replacement for popular panel mounted breakers
- Mounts in 3/8" hole
- White push buttons for DC, black for AC
" Amps: 10
|
|
462-11-CB41220 Push Button Circuit Breaker, 15 Amp, White " - Replacement for popular panel mounted breakers
- Mounts in 3/8" hole
- White push buttons for DC, black for AC
" Amps: 15
|
|
462-11-CB41230 Push Button Circuit Breaker, 20 Amp, White " - Replacement for popular panel mounted breakers
- Mounts in 3/8" hole
- White push buttons for DC, black for AC
" Amps: 20
|
|
462-11-CB41200 Push Button Circuit Breaker, 5 Amp, White " - Replacement for popular panel mounted breakers
- Mounts in 3/8" hole
- White push buttons for DC, black for AC
" Amps: 5
|
|
462-354-2243001 Includes both strike plates. Plastic housing. Polished chrome finish brass button. Fastener # 6 RH.
Finish: Polished Chrome, A: 1-15/16", B: 1-7/8", C: 2-1/16", D: 1", Case: 5
Sold: Each
|
|
462-11-MP39320 "Momentary ON-OFF SPST
For starter, horn or other functions.
Solid brass construction. 1-1/4" long, 5/8" diameter mounting stem. Overall length is 2-7/8"
Description: Dust proof rubber boot nut, Screw terminals, Amps: 20
Sold: Each
|
|
462-12-M626 "Normally off. S.P.S.T. Two positions: off - momentary on. On with button depressed. Spring return to off. Silver contacts. Molded plastic insulator with a protective barrier between terminals. Mounting stem 5/8"-32 diameter, 1-3/8" long. Fits panels up through 1" thick. Includes 407-03 black moisture repellent rubber button cover."
Pkg.: Boxed
Sold: Each
|
|
462-12-M492BP "Normally off. S.P.S.T. Two positions: off - momentary on. On with button depressed. Spring return to off. Mounting stem is 5/8" -32 thread, 1-3/8" long. Fits panels up through 1" thick. 2 screw terminals."
Pkg.: Retail
Sold: Each
|
|
462-12-M490BP "Normally OFF. S.P.S.T. Two positions: off - momentary on. On with button depressed. Spring return to off. Silver contacts. Molded plastic insulator with protective barrier between terminals. Mounting stem 5/8"-32 thread, 1-3/8" long. Fits panels up through 1" thick."
Pkg.: Retail
Sold: Each
|
|
620-70150 Push In Chrome Breather, 1" Neck
|
|
462-232-PP118 These push in plugs are used to stop water flow through drains or overflows from baitwell or livewell. Also work well as plugs for sink drains and built in cooler drains. These plugs are injection molded of marine grade PVC for a long lifespan. Plugs feature a pull tab or pull ring for easy removal. They have double seal rings to assure positive sealing. Fits: 1-1/8", Pkg.: Bulk, Case: 50
|
|
464-420390-1 PUSH PULL SWITCH 2-POS BRS
Seadog 420390-1 Two Position On-Off Switch
Features:
- Amps: 15
- Shaft length: 1"
- Shaft diameter: 3/8"
- Stamped brass construction
|
|
464-420410-1 Push Pull Switch 3 Position 1 Circuit
The Seadog Three Position One Circuit Switch has a simple push and pull operation. When pushed all the way in, the switch is in the "off" position. To activate the first circuit, the switch is pulled to the first stop. At the second stop, the first and second circuit are then activated.
- Amps: 15
- Shaft length: 1"
- Shaft diameter: 3/8"
- Stamped brass construction
|
|
