Generic

Replaces: OMC 387094, 395207, 585062, 586288
8-tooth drive gear

• Replaces: OMC 387094, 395207, 585062, 586288


• 8-tooth drive gear

Description: New , Type: New

Sold: Each

FOR MERCURY - Fits:

• 65-85 HP 4-cyl


• 10 tooth drive gear

• 65-85 HP 4-cyl


• 10 tooth drive gear

Type: New

Sold: Each

1985-Up
10 tooth drive gear
Replaces OMC 393570, 585060, 583285

• 1985-Up


• 10 tooth drive gear


• Replaces OMC 393570, 585060, 583285

Description: New, Type: New

Sold: Each

Replaces: OMC 386591, 392133, & 585061, 586278, 385401, 174942 and 175019
11-tooth drive gear

• Replaces: OMC 386591, 392133, & 585061, 586278, 385401, 174942 and 175019


• 11-tooth drive gear

Type: New

Sold: Each

Replaces: Mercury 50-57465A1, 50-72467
10-tooth drive gear

• Replaces: Mercury 50-57465A1, 50-72467


• 10-tooth drive gear

Type: New

Sold: Each

For Mercury/Mariner-Fits:
40-50 HP
10-tooth drive gear

Type: New

Sold: Each

Replaces: Merc 50-79472, 50-77141, 50-44415, 50-7942-1, 5079472T2
8-tooth drive gear

• Replaces: Merc 50-79472, 50-77141, 50-44415, 50-7942-1, 5079472T2


• 8-tooth drive gear

Type: New

Sold: Each

CHRYSLER/FORCE - Fits:

• 35-50 HP


• 11 tooth drive gear

• 35-50 HP


• 11 tooth drive gear

Type: New

Sold: Each

"For Mercury/Mariner-Fits:
'86-96/6-15 HP
'80-'03/18-25 HP
2 1/2" motor casing
10-tooth drive gear"

Description: Brush holder assembly

Sold: Each

Fits: Mercury/Force
90-120 HP Sport Jet
9-tooth drive gear

Type: New

Sold: Each

Description: O/B Kit w/Ladder, Size: 18"W x 15-1/2" D

Outboard Swivel Thru Hull Rigging Flange Kit - Fits 2" ID / 2.5" OD Hose

While the rest of the world is stuck in just one spot Hardin Marine has taken on the challenge to design the freedom of movement for your outboards rigging hose connection. With more movement than ever from today's popular outboard engines when being trimmed or stored for travel the industry has been faced with kinked rigging hoses and cowling damage due to the rigid hoes connection option that has only been available until now. This version fits 2" ID (2-1/2" OD) rigging hose.

Hardin's new  non-corrosive 2264 Delrin directional swivel hose connection provides 12 degrees of angle for hose/ tube movement and a water tight seal. With hidden non-exposed mounting hardware this unit features the ultimate in a clean smooth finish.

Attachment of the rigging hose couldn't be easier as the unit is threaded so that the rigging hose screws counter clockwise into the swivel ball connector requiring no additional hardware for hose attachment for the ultimate in finished appearance.

The 3/4" tall flange has a 5" diameter OEM factory mounting foot print. and requires a 3-3/8” hole to install with (4) #10 fasteners (NOT included). The Connector assembly measures 2-1/2" overall installed height.

This Multi angle rigging tube connector is available in a OEM black finish or with an optional polished or powdercoated Stainless Steel trim ring both individually or as a kit with rigging hose.

Kits include a Transom swivel connector and 5' long, 2" ID (2-1/2" OD) diameter premium corrugated black, gray or white rigging hose that is durable, flexible, and kink resistant to provide an excellent protection for cables and wiring from dirt, abrasion, sun and water. Our rigging hose is the hose of choice for most OEM boat builders.

Outboard Swivel Thru Hull Rigging Flange Kit - Fits Large 2.5" ID / 3" OD Hose

While the rest of the world is stuck in just one spot Hardin Marine has taken on the challenge to design the freedom of movement for your outboards rigging hose connection. With more movement than ever from today's popular outboard engines when being trimmed or stored for travel the industry has been faced with kinked rigging hoses and cowling damage due to the rigid hoes connection option that has only been available until now. This version fits larger size 2-1/2" ID (3" OD) rigging hose.

Hardin's new  non-corrosive 2264 Delrin directional swivel hose connection provides 12 degrees of angle for hose/ tube movement and a water tight seal. With hidden non-exposed mounting hardware this unit features the ultimate in a clean smooth finish.

Attachment of the rigging hose couldn't be easier as the unit is threaded so that the rigging hose screws counter clockwise into the swivel ball connector requiring no additional hardware for hose attachment for the ultimate in finished appearance.

The 3/4" tall flange has a 5" diameter OEM factory mounting foot print. and requires a 3-3/8” hole to install with (4) #10 fasteners (NOT included). The Connector assembly measures 2-1/2" overall installed height.

This Multi angle rigging tube connector is available in a OEM black finish or with an optional polished or powder coated Stainless Steel trim ring both individually or as a kit with rigging hose.

Kits include a Transom swivel connector and 5' long 2-1/2" ID (3" OD) diameter premium corrugated black, gray or white rigging hose that is durable, flexible, and kink resistant to provide an excellent protection for cables and wiring from dirt, abrasion, sun and water. Our rigging hose is the hose of choice for most OEM boat builders.

Designed for outboard marine shops. Absorbs oil, water, grease into suspension. Removes oil slick from water surface. Lower units come out clean. No wipe down necessary. Real oil eater. Concentrated. Self-activating. Commercial formulation. Biodegradable.

Size: Gallon, Case: 4

Sold: Each

Use 18-2362 mounting nuts.
Contains: O-ring SIE 7513 and 2 outdrive seals SIE 2996.

Fits: Volvo SX Drives

Sold: Bag

Fits: All Bravo, Replaces: 16755A1, 16755Q1, 16755T1

Sold: Each

Fits: R, MR, Alpha I, Alpha Gen II (1983-Newer), Replaces: 27-64818A3, 27-94996Q2, 27-94996T2

Sold: Each

Mercruiser: For Bravo. Replaces 12708.

Description: Mercruiser: For Bravo. Replaces 12708.

Sold: Each

The rod consists of two stainless steel tubes.

Description: Outer Tube Ball Joint

Sold: Each

A simple arrangement of neon lights which visually indicates correct wiring, reverse polarity, open ground, neutral or hot wire, hot and ground reversed, hot wire on neutral terminal and hot terminal un-wired. Simply plug into a single phase 125 volt, 2 pole, 3 wire outlet and combination of lit/unlit lamps will immediately indicate condition of circuit. Instructions and symbol identification are printed on durable polyester labels permanently attached to tester. Can test other 2 pole, 3 wire phase 125 volt outlets with proper use of correct adapter.