462-79-MDR740 Protects against corrosion. Ideal for battery switches and terminals, bilge pumps and electrical connections. Dielectric, resists moisture and acids. Prevents vibration. Prevents bilge pump failure due to moisture wicking in butt connector on wiring in bilge. Water-based formula for easy cleanup with just water.
Size: 4 oz.
Sold: Each
|
|
462-108-770055 Liquid MareLube™ is designed for valves where access is difficult or convenience is desired. Simply pour Liquid MareLube into the system through the valve tailpipe or hose, and activate the handle of the valve. This is a true Readily Biodegradable and biorenewable liquid lubricant developed for the regular maintenance of marine valves and seacocks. This valve service should be performed several times a season to reduce marine growth and keep seals lubricated. Size: 16oz. Sold: Each
|
|
462-639-765012 Provides low cost watertight cable entries into panels and junction boxes. UL and CSA approved to work with round and flat cable. Resistant to saltwater, gasoline, alcohol, ketones and mineral oil. Safe underwater to 300 ft. (150 PSIG).
Description: Flat, Wire Range: 14/2-12/3, Cable Size: ---
|
|
462-148-10107 "Locks the outboard motor in the forward position while trailering, greatly reducing the damaging effects of road shock. Does not "tie" engine's lower-unit to trailer, eliminating excessive pressure on hydraulic seals and unsightly scuff marks. Small compact mount can be easily stored in just about any boat compartment. Constructed of black powder-coated steel with stainless steel pins."
Fits: Mercury engines 200 OpitMax, 255 OptiMax, 225HP EFI, 250HP EFI
Sold: Each
|
|
160-14-0721-02 Lock Washer
|
|
160-14-0722-01 Lock washer
|
|
160-14-1895-00 Lock washer
|
|
462-220-580400 These receiver locks are safe and secure to keep your vehicle and trailer connected. Covered key slot helps prevent dust and corrosion in the locking mechanism.
Description: Bent Pin Lock, Finish: Chrome, Size: 5/8", Receiver: Class III-IV
|
|
462-220-580401 These receiver locks are safe and secure to keep your vehicle and trailer connected. Covered key slot helps prevent dust and corrosion in the locking mechanism.
Description: Dog Bone Lock, Finish: Chrome, Size: 5/8", Receiver: Class III-IV
|
|
462-220-580402 These receiver locks are safe and secure to keep your vehicle and trailer connected. Covered key slot helps prevent dust and corrosion in the locking mechanism.
Description: Dog Bone Lock, Finish: Stainless Steel, Size: 5/8", Receiver: Class III-IV
|
|
462-220-580410 Rotating lock housing provides easy key access. These locks fit around the coupler making it impossible to hitch to anyone's vehicle. Covered key slot helps prevent dust and corrosion in the locking mechanism. 580409 features a long shaft for multiple coupler applications.
|
|
462-220-580409 Rotating lock housing provides easy key access. These locks fit around the coupler making it impossible to hitch to anyone's vehicle. Covered key slot helps prevent dust and corrosion in the locking mechanism. 580409 features a long shaft for multiple coupler applications.
|
|
462-354-2018001 Stamped 304 Stainless Steel. #8 FH Fastener. Carded.
A: 2-7/8", B: 1-7/16", C: 1-7/16", D: 2-3/8", E: 1/16", Pack: 2
Sold: Pack
|
|
462-354-3316201 Stamped 304 stainless steel. Carded. Size: 6-3/4" L x 2-3/8" W ", Fastener: #8 RH Sold: Each
|
|
462-354-150128 316 Stainless steel. Provides for the secure attachment to lines for use on safety harnesses, fishing lines, mooring buoy lines, etc. Locking gate reduces the possibility of accidental opening.
A: 7/16", B: 4-3/4", C: 11/16", D: 15/16", Pkg.: Bulk
Sold: Each
|
|
462-354-351321L1 Investment Cast 316 Stainless steelPrevent fuel theftsIncludes two keysThe cap threads are 1-1/4" - 11-1/2. Type: Diesel, A: 1-1/2" Hose, B: 3-1/4", C: 3-7/16", Fastener: #10 FH - Investment Cast 316 Stainless steel
- Prevent fuel thefts
- Includes two keys
- The cap threads are 1-1/4" - 11-1/2.
|
|
462-354-351320L1 Investment Cast 316 Stainless steelPrevent fuel theftsIncludes two keysThe cap threads are 1-1/4" - 11-1/2. Type: Gas, A: 1-1/2" Hose, B: 3-1/4", C: 3-7/16", Fastener: #10 FH - Investment Cast 316 Stainless steel
- Prevent fuel thefts
- Includes two keys
- The cap threads are 1-1/4" - 11-1/2.
|
|
|
|
|
462-29-LP900D Description: Non-automatic pump, GPH: 900, Volts: 12
|
|
462-29-LP900S Description: Fully automatic pump, GPH: 900, Volts: 12
|
|
