Generic

Strips can be cut on the cut-marks and can be wired together to make longer runs.

• Short lengths are wired on both ends
• 16' Reels can be cut on cut marks and sealed with end caps
• 16' Reels can be wired together for long runs
• IP-68 waterproof
• SMD 5050 LED
• Fits 14mm Flex-Trak mounting channel
• Wired on both ends
• Mounting clips included
• End caps included

Length: 16', Width: 14mm, LED Colors: Blue-White or Red-White, LEDs: 60/Meter

Strips can be cut on the cut-marks and can be wired together to make longer runs.

• Short lengths are wired on both ends
• 16' Reels can be cut on cut marks and sealed with end caps
• 16' Reels can be wired together for long runs
• IP-68 waterproof
• Wired on both ends
• SMD 5050 LED
• Blue, Red or Cool White or dual color
• Fits: 14mm Flex-Trak mounting channel
• Mounting clips included
• End caps included

Lengths: 21" or 48", Width: 14mm, LED Color: Blue-White, LEDs: 60/Meter

Strips can be cut on the cut-marks and can be wired together to make longer runs.

• Short lengths are wired on both ends
• 16' Reels can be cut on cut marks and sealed with end caps
• 16' Reels can be wired together for long runs
• IP-68 waterproof
• SMD 5050 LED
• Fits 14mm Flex-Trak mounting channel
• Mounting clips included
• End caps included

Lengths: 21" or 48", Width: 14mm, LED Color: Red-White, LEDs: 60/Meter

"A 7-diode, LED oval stop, turn and tail light suitable for over-80" vehicle width applications. It uses the industry-standard PL3 socket that is integrated into the housing. 9-16 volt operating range. Meets FMVSS 108 requirements in horizontal, vertical or any 360 degree position.
Includes light w/flange & pigtail."

Size: 7-7/8" w/Flange"

Sold: Each

Allows you to clip in 12mm flexible LED flexible PCB strips.

Description: Mounting channel, 4' Length, Size: 12mm

12mm LED Flexible PCB 50/50 boards are encapsulated in a rectangular silicon tube that is waterproof and resistant to UV and most cleaners. Perfect for under valances, gunnels, hard tops, dive platforms and pontoon boats. Wired on both ends to simplify daisy chaining and cutting into two lengths. Dimmable, can be cut every 3", and includes 10 mounting clips and additional end caps, interior or exterior mount (IP65 waterproof rating).

• Length: 16'
• Width: 10mm
• LED Color: Warm White
• Volts: 12
• Your choice of:
  • LEDs: 30/meter, Lumens: 400
  • LEDs: 60/meter, Lumens: 800

12mm LED Flexible PCB 50/50 boards are encapsulated in a rectangular silicon tube that is waterproof and resistant to UV and most cleaners. Perfect for under valances, gunnels, hard tops, dive platforms and pontoon boats. Wired on both ends to simplify daisy chaining and cutting into two lengths. Dimmable, can be cut every 3", and includes 10 mounting clips and additional end caps, interior or exterior mount (IP65 waterproof rating).
Includes a radio frequency controller and driver for up to 3 strips. Dial your custom color, dim any color or pick a flash/strobe/fade program.

Lengths: 16' or 23', Width: 12mm, LED Color: Red/Green/Blue, LEDs: 60/meter, Volts: 12

"LED Drink Holder has three LED's. Dual purpose design allows the use of beverage cans with or without insulated can wraps, as well as most sizes of bottles. The bottom is padded with a rubber insert to prevent rattling, and the drain fitting allows water to be drained into the bilge - use 1/4" tubing secured with a tie-wrap. 12 volt DC. Stamped 304 stainless."

LEDs: 3 Red, Size: " 4-3/8" ? 3-3/16", Hole: 3-3/4"

"LED Drink Holder has three LED's. Dual purpose design allows the use of beverage cans with or without insulated can wraps, as well as most sizes of bottles. The bottom is padded with a rubber insert to prevent rattling, and the drain fitting allows water to be drained into the bilge - use 1/4" tubing secured with a tie-wrap. 12 volt DC. Stamped 304 stainless."

LEDs: 3 Blue, Size: " 4-3/8" ? 3-3/16", Hole: 3-3/4"

"Injection molded nylon and aluminum. Approved for USCG 2 NM. Mounts on 1-1/4" square tubing. #10 FH fastener."

A: 24", B: 2-7/8", C: 3-3/8"

Sold: Each

"Injection molded nylon and aluminum. Approved for USCG 2 NM. Mounts on 1-1/4" square tubing. #10 FH fastener."

A: 9", B: 2-7/8", C: 3-3/8"

Sold: Each

LED G4 bulb is designed for interior use only. 12V, 60 mA.

LEDs: 14, A: 1-1/4", B: 7/8", Watts: 0.7, Case: 5

Sold: Each

"A 7-diode, LED oval stop, turn and tail light suitable for over-80" vehicle width applications. It uses the industry-standard PL3 socket that is integrated into the housing. 9-16 volt operating range. Meets FMVSS 108 requirements in horizontal, vertical or any 360 degree position.
Includes light, grommet & pigtail."

Size: 6-1/2" w/o Grommet"

Sold: Each

Lens: Amber, Volts: 12 /24V DC

Lens: Green, Volts: 12 /24V DC

Lens: Green, Volts: 120V AC

Lens: Red, Volts: 120V AC

Lens: Red, Volts: 12 /24V DC

"Hellamarine 3" round LED UV resistant courtesy lamps can be installed almost anywhere onboard. Advanced lens technology provides a cool, even spread of soft light while consuming less than .5W, a fraction of the energy of traditional bulbs. Each lamp is completely sealed, highly shock, impact and vibration resistant and run extremely cool for safer installations where the heat of an incandescent lamp may cause damage. Flush mount installations require a 2" cutout. Flush/Surface mount models include an adapter ring for surface mount applications."

Size: 3", Bezel: White, LED Color: White, Mount: Flush or Surface, Volts: 12

Sold: Each

"Low profile, waterproof lights designed specifically for harsh marine conditions. Packaged set includes: two LED over 80" tail lights and mounting hardware for quick and easy upgrade to LED. Contents: (1) STL-16RB, (1) STL-17RB and stainless steel mounting hardware. Lifetime LED Warranty."

Description: LED Set

Sold: Pack