Generic

Shell is made of high density polyethylene and keeps mooring/pendant line dry. Protects boat from contact with mooring hardware. Stable in water - won't roll over causing mooring line to get wet. They are stackable when not in use. Lifting grips aid in handling.

Dia.: 18", Color: White w/ blue band, Tube: 2.5", Buoyancy: 105 lbs.

Shell is made of high density polyethylene and keeps mooring/pendant line dry. Protects boat from contact with mooring hardware. Stable in water - won't roll over causing mooring line to get wet. They are stackable when not in use. Lifting grips aid in handling.

Dia.: 24", Color: White w/ blue band, Tube: 3", Buoyancy: 240 lbs.

Shell is made of high density polyethylene and keeps mooring/pendant line dry. Protects boat from contact with mooring hardware. Stable in water - won't roll over causing mooring line to get wet. They are stackable when not in use. Lifting grips aid in handling.

Dia.: 30", Color: White w/ blue band, Tube: 3", Buoyancy: 460 lbs.

"Vinyl coated trolling type with 1" polypropylene shroud lines, except for 925 which is for use with horseshoe buoy. Easily collapses for storage. Not for storm use."

Dia.: 10", Weight: 4 lbs

"Vinyl coated trolling type with 1" polypropylene shroud lines, except for 925 which is for use with horseshoe buoy. Easily collapses for storage. Not for storm use."

Dia.: 18", Weight: 5 lbs

"Vinyl coated trolling type with 1" polypropylene shroud lines, except for 925 which is for use with horseshoe buoy. Easily collapses for storage. Not for storm use."

Dia.: 24", Weight: 6 lbs

"Vinyl coated trolling type with 1" polypropylene shroud lines, except for 925 which is for use with horseshoe buoy. Easily collapses for storage. Not for storm use."

Dia.: 30", Weight: 8 lbs

"Soft, tough and easy to clean. Made of vinyl coated unicellular foam to provide life saving buoyancy. 1" webbing loops pass through the cushion body so they can't pull out. USCG Approved Type IV PFD Orange."

Color: Orange, Case: 6

"Soft, tough and easy to clean. Made of vinyl coated unicellular foam to provide life saving buoyancy. 1" webbing loops pass through the cushion body so they can't pull out. USCG Approved Type IV PFD White."

Color: White, Case: 6

RE504480 John Deere Heat Exchanger 02035-005 cupro-nickel (CuNi) core.

JT3288 Johnson & Towers Heat Exchanger (J&T) 8.2 TI

JT3288CN Johnson & Towers Heat Exchanger (J&T) 8.2 TI with standard copeer nickel (CuNi) core.

JT4150 Johnson & Towers Heat Exchanger (J&T) 8.2 GM

JT4150CN Johnson & Towers Heat Exchanger (J&T) 8.2 GM with standard copeer nickel (CuNi) core.

This kit is for use with CC170 series cables, 35HP and below, 1973-78.

:

Sold: Each

Johnson / Evinrude Thermostat Kit

Description: Kit V-4 Crossflow

Sold: Bag

"Used to test V4/V6 optical sensor on the engine or bench. Sounds an audible alert when setting the ignition timing, to allow an optional "eyes free" operation. Includes case, test leads and manual.
See CDI catalog for complete application information."

:

Sold: Each

Remember that the impeller should be replaced every year with a Johnson Pump Brand original impeller to ensure it matches your pump exactly. Remove the impeller with a slip joint plier or an Impuller.

Blades: 6, Dia.: 2"

Sold: Each

Remember that the impeller should be replaced every year with a Johnson Pump Brand original impeller to ensure it matches your pump exactly. Remove the impeller with a slip joint plier or an Impuller.

Blades: 12, Dia.: 2.25"

Sold: Each

Remember that the impeller should be replaced every year with a Johnson Pump Brand original impeller to ensure it matches your pump exactly. Remove the impeller with a slip joint plier or an Impuller.

Blades: 12, Dia.: 3.74"

Sold: Each