Generic

Injection molded fiberglass nylon with a stainless steel pin. Fastener is #8 FH. Carded.

Color: White, A: 3", D: 1-3/8", E: 3/16", Pack: 2

Sold: Pack

Chrome/Brass Separating Hinge-Left

Type: Left, A: 3-7/8", B: 1-15/16", C: 1-15/16", D: 2", E: 3/16"

Quickly and easily install a damaged jaw slide. Hinged jaw slides allow for installation of the slide on the tubing without having to remove the top from the boat or remove canvas, end fitting, or straps in order to install a new fitting.

• Sizes:
  • 7/8"
  • 1"
• Case: 10
• Material: 316 Stainless
• Hinged
• Tube: 7/8"
• Pin: 1/4"

164051030 Hino Heat Exchanger for the EH700, diameter 3-1/4" x length 33-1/2"

164051080 Hino Heat Exchanger for W06 29 3/16" long x 3-1/2" Dia.

728935 Hino Oil Cooler - 6 Cyl (29135).

728935CN Hino Oil Cooler - 6 Cyl (29135CN).

733940 Hino Oil Cooler - 4 Cyl.

733940CN Hino Oil Cooler - 4 Cyl.

See Sierra's catalog for current application information.

Description: Permanent magnet, 5.0L & 5.8L Ford engines, Application: OMC 987811, 3854190, Pleasurecraft 987811, RRK122014, RA122001, Volvo 3854190

Sold: Each

Solid steel hitch balls engineered to meet all safety requirements of VESC regulation V-5. Cold forged for superior strength.
Select the correct ball for the coupler on your trailer. The ball diameter required is stamped into the coupler handle or body. Ensure the trailer ball shank fits the thickness and diameter of your drawbar, ball mount or step bumper

Ball: 1-7/8", Shank: 1" x 2-1/8", GTW: 2,000 lbs., Material: Chrome, Pkg.: Retail

Ball: 1-7/8" , Shank: 1" x 2-1/8", GTW: 2,000 lbs., Material: Chrome, Pkg.: Bulk

Solid steel hitch balls engineered to meet all safety requirements of VESC regulation V-5. Cold forged for superior strength.
Select the correct ball for the coupler on your trailer. The ball diameter required is stamped into the coupler handle or body. Ensure the trailer ball shank fits the thickness and diameter of your drawbar, ball mount or step bumper

Ball: 1-7/8", Shank: 3/4" x 1-1/2", GTW: 2,000 lbs., Material: Chrome, Pkg.: Retail

Solid steel hitch balls engineered to meet all safety requirements of VESC regulation V-5. Cold forged for superior strength.
Select the correct ball for the coupler on your trailer. The ball diameter required is stamped into the coupler handle or body. Ensure the trailer ball shank fits the thickness and diameter of your drawbar, ball mount or step bumper

Ball: 1-7/8", Shank: 3/4" x 2-3/8", GTW: 2,000 lbs., Material: Chrome, Pkg.: Retail

Solid steel hitch balls engineered to meet all safety requirements of VESC regulation V-5. Cold forged for superior strength.
Select the correct ball for the coupler on your trailer. The ball diameter required is stamped into the coupler handle or body. Ensure the trailer ball shank fits the thickness and diameter of your drawbar, ball mount or step bumper

Ball: 2", Shank: 1" x 2-1/8", GTW: 6,000 lbs., Material: Stainless, Pkg.: Bulk

Solid steel hitch balls engineered to meet all safety requirements of VESC regulation V-5. Cold forged for superior strength.
Select the correct ball for the coupler on your trailer. The ball diameter required is stamped into the coupler handle or body. Ensure the trailer ball shank fits the thickness and diameter of your drawbar, ball mount or step bumper

Ball: 2, Shank: 1" x 2-1/8", GTW: 7,500 lbs, Material: Chrome, Pkg.: Retail

"Solid steel hitch balls are engineered to meet all safety requirements of VESC regulations V-5. When installing hitch balls: torque all 3/4" shank balls to 160 ft. lbs., all 1" to 250 ft. lbs., and 1-1/4" shank balls to 450 ft. lbs. Always use the properly rated hitch ball for your towing system.
1. Your towing system's maximum wt. rating is always equal to the lowest rated item in the system.
2. Your hitching system cannot be upgraded to a rating higher than the maximum rating of your hitch."

Ball: 2", Shank: 1" x 2-1/8", GVW: 7,500 lbs., Material: Chrome

Ball: 2", Shank: 1-1/4" x 2-3/4", GTW: 8,000 lbs, Material: Chrome, Pkg.: Bulk

Solid steel hitch balls engineered to meet all safety requirements of VESC regulation V-5. Cold forged for superior strength.
Select the correct ball for the coupler on your trailer. The ball diameter required is stamped into the coupler handle or body. Ensure the trailer ball shank fits the thickness and diameter of your drawbar, ball mount or step bumper

Ball: 2", Shank: 3/4" x 1-1/2", GTW: 3,500 lbs, Material: Chrome, Pkg.: Retail

Solid steel hitch balls engineered to meet all safety requirements of VESC regulation V-5. Cold forged for superior strength.
Select the correct ball for the coupler on your trailer. The ball diameter required is stamped into the coupler handle or body. Ensure the trailer ball shank fits the thickness and diameter of your drawbar, ball mount or step bumper

Ball: 2", Shank: 3/4" x 2-3/8", GTW: 3,500 lbs, Material: Chrome, Pkg.: Retail