Generic

"Collinear-phased 5/8 wave elements. 6dB gain. The 5225XT is Shakespeare's classic 5225 in a new, stronger, stiffer radome. It's extra tough for use on hard tops, T-tops, radar arches, or wherever its extra resistance to high winds and high speeds is welcome. Brass and copper elements, stainless steel ferrule with standard 1"-14 thread, 20' RG-8/X low-loss cable plus a PL-259 connector."

Length: 8', Ferrule: Stainless Steel

Sold: Each

Shakespeare's best - maximizes range and quality in a great looking antenna. This is Shakespeare's Galaxy^® Style 5225 in a stronger, stiffer radome. It's extra tough for use on hard tops, T-tops, radar arches, or wherever its extra resistance to high winds and high speeds is needed or desired. The 5226-XT has an exclusive Galaxy black finish.

Length: 8', Ferrule: Stainless Steel

Sold: Each

"5/8 Wave over 1/2 wave dipole. 8dB gain. The ultra-performer, the most effective 8dB antenna system available, thanks to its increased signal capture area. Brass and copper elements, stainless steel ferrule with standard 1"-14 thread, includes 20' RG-8/X cable and PL-259 connector. Two sections: base 94", tip 74". Suggested mount: 409 or 410 mounting kit."

• Brass and copper elements


• Stainless steel ferrule with standard 1"-14 thread


• Includes 20' RG-8/X cable and PL-259 connector


• Two sections: base 94", tip 74"


• Suggested mount: 409 or 410 mounting kit

Length: 14', Ferrule: Stainless Steel

Sold: Each

"Entertainment band. This antenna reaches out to pick up those AM/FM signals from afar. Copper elements, stainless ferrule with standard 1"-14 thread. Includes 20' RG-69 cable with Motorola type plug installed. Suggested mount: 4187 ratchet."

Length: 8'

"Center-fed 1/2 wave coaxial sleeve. 3dB gain. Heavy-duty construction for general purpose communications. It's at home on T-tops, Hard-tops and other positions aloft, where its small size can deliver maximum range. Brass and copper elements, stainless steel ferrule with standard 1"-14 thread. Includes 20' RG-8/X cable and PL-259 connector. Suggested mount: 4187."

Length: 4', Color: White, Ferrule: Stainless Steel

Sold: Each

"Entertainment band. Its sturdy construction and outstanding performance make it an excellent choice for T-tops, hard-tops and other elevated mounting positions. Extra rigid, extra tough. Copper elements, and stainless ferrule with standard 1"-14 thread. Includes 12' RG-62 cable with Motorola type plug installed. Suggested mount: 4187."

Length: 4'

"Emergency VHF flex antenna, loaded 1/4 wave whip. Comes packed in a 12" weather resistant plastic tubing. Complete with 12' cable, connector, and rubber suction cup for fast mounting to any smooth horizontal surface. Flexible vinyl outer covering."

Length: 10"

Sold: Each

Used

• Available: (1) One
• SOLD AS IS
• NON RETURNABLE

Please study photo carefully, item is sold as shown.

"Chrome-brass base for deck or side mounting. Base is dual joint, free pivoting to allow easy lowering of antenna for clearing overhead obstructions. Standard 1"-14 male threads. Use with stand-off bracket for larger antennas."

:

Sold: Each

Simple as connecting a garden hose! Flush your boat engine safely and easily. Plastic construction, stainless steel spring. Transparent body allows for visual inspection of water flow. Check valve automatically shuts off hull intake when water pressure is applied. Adapter supplied with FlushPro makes winterizing easy.

Description: Valve, Hose: 1"

Sold: Each

"Cast bronze. Flange is machined to fit hull and grooved to retain bedding compound. Neck is threaded to approximately 3/8" from flange. Includes flange nut. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS."

Hose: 1-1/2", Flange: 3", Max Hull Thickness: 2-1/4"

Sold: Each

For hot or cold pressurized water system supply, washdown pump connections, and head intake hose. Clear, extra heavy duty wall, polyester reinforced PVC. FDA formula vinyl. 50' Roll out cartons.

ID: 1-1/2", OD: 1-15/16", Length: 50'

Designed for livewell intake and drain, hose can also be used for bilge pump intake and discharge, sanitation intake and vent hose, and drain lines for sinks, showers, and scuppers.

ID: 1-1/2", Length: 50'

"Available in plain or chrome plated bronze, these fittings have a hose barb connection and are recommended for use above the waterline only. The flange is machined to fit the hull tightly and grooved to retain bedding compound. Minimum hull thickness 3/8". NOT TO BE USED IN POTABLE WATER SYSTEMS."

Hose: 1-1/2", Flange: 3-1/8", Max Hull Thickness: 1-7/8"

Sold: Each

Designed specifically for the most critical toilet and holding tank connections. Gives excellent flexibility, bend radius and maximum resistance to odor permeation and toilet chemicals. 2 ply.

ID: 1-1/2", OD: 1-55/64", Length: 12-1/2', Working Pressure: 150#

Sold: Each

Flame retardant. Provides chafing and quality appearance in marine wiring systems. Complies with ABYC standard 8.15.19. Meets UL94 V2 standard. High abrasion resistance. Temperature rated to 275° F. Black with Blue stripe.

Size: 1-1/2" x 50'

Sold: Each

Ideal for toilet to holding tank and holding tank pump out applications. Superior resistance to odor permeation. Smooth off white PVC with vinyl helix. Contains anti fungus agent to control odor. Resistant to: mild chemicals, salt water, permeation. Do not use glycol based antifreeze in hose. Do not use for potable water. 5 Year limited warranty.

ID: 1-1/2", Length: 50', Bend: 5"

Sold: Each

ID: 1-1/2", Length: 50', Color: Black

ID: 1-1/2", OD: .125", Length: 50', Working Pressure: 20# (70° F)

"Ideal for bilge pump discharge hose, this hose also works for potable water tank fill and drain hose for sinks, showers, scuppers, and livewells. Clear FDA formula PVC w/vinyl helix. Flexible and abrasion resistant. Resistant to mild chemicals and salt water. Do not use glycol based antifreeze in hose. Do not attach to thru-hull fittings below the water line. For 1-1/2" couplings, use 147-1120 right hand thread cuffs."

ID: 1-1/2", Length: 50', Color: Black

Sold: Each