462-88-1480586 Heavy duty sanitation hose for toilet to holding tank, self-draining lines, intake, holding tank vent and pump out applications. Also good for bilge pump intake/discharge, potable water fill, livewell intake/drain, and sink, shower, or scupper drains. Resistant to odor permeation. Smooth white FDA grade PVC w/vinyl helix and rated for full vacuum. Resistant to mild chemicals, salt water, and permeation. Do not use glycol based antifreeze in hose. Not for use in pressurized water systems. ID: 5/8", Length: 50', Bend: 3", VAC: 28 Shields Vac Extra Heavy Duty/FDA Hose has a smooth white FDA grade PVC with vinyl helix. It is rated for full vacuum and is resistant to mild chemicals, permeation, and saltwater. This hose is primarily used for bilge pump intake and discharge, drains (sinks, shower, and scupper), livewell intake and drain, potable water tank fill, and sanitation (toilet to holding tank, intake, self draining lines vent and pump out). This hose is resistant to odor permeation. Do not use ethylene glycol based antifreeze in hose. Do not use in pressurized water systems.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Designed for critical water connections such as heat exchangers, toilet intake, small engine intake, and bilge pump intake/discharge hose. Approved for below water line drains and scuppers. EPDM tube and cover, fabric reinforced, good bend radius. Resistant to: mild chemicals, heat, cold, ozone, salt water. Temperature range: -40°F to +190°F.
ID: 5/8", OD: 1", Length: 50', Working Pressure: 1000#
ID: 1", OD: 1-29/64", Length: 50', Working Pressure: 800#
|
|
620-32941 Extra O2 Bung for LS Marine Aluminum Exhaust Manifold System
The 620-32940 Exhaust System comes with a single O2 Bung, however some systems require a 2nd O2 bung. Order this part alongside a 620-32940 system to have two O2 bungs.
|
|
462-49-NS2039EX 4Extruded Screens
Fits N0039-10FX, N0039-10FXN, N1039-10A, N2039-10A hatches.
|
|
462-354-0804661 Eyebolt with shoulder helps spread the load over a broader area. Machined AISI 304 stainless steel. Metric threads. A: 1/4"- 6 mm, B: 3-3/8" , C: 1/2" , D: 2-5/16" , E: 1" , Pkg.: Card Machined AISI 304 stainless steel. Metric threads.
|
|
462-354-080466 Eyebolt with shoulder helps spread the load over a broader area. Machined AISI 304 stainless steel. Metric threads. A: 1/4"- 6 mm, B: 3-3/8" , C: 1/2" , D: 2-5/16" , E: 1" , Pkg.: Bulk Machined AISI 304 stainless steel. Metric threads.
|
|
462-354-0804831 Eyebolt with shoulder helps spread the load over a broader area. Machined AISI 304 stainless steel. Metric threads. A: 5/16" - 8 mm, B: 2-9/16" , C: 9/16" , D: 1-5/16" , E: 1" , Pkg.: Card Machined AISI 304 stainless steel. Metric threads.
|
|
462-354-0804881 Eyebolt with shoulder helps spread the load over a broader area. Machined AISI 304 stainless steel. Metric threads. A: 5/16" - 8 mm, B: 4-5/16" , C: 5/8" , D: 3" , E: 1" , Pkg.: Card Machined AISI 304 stainless steel. Metric threads.
|
|
462-354-080463 Eyebolt with shoulder helps spread the load over a broader area. Machined AISI 304 stainless steel. Metric threads. A: 1/4"- 6 mm, B: 2-3/16" , C: 1/2" , D: 1-1/8" , E: 1" , Pkg.: Bulk Machined AISI 304 stainless steel. Metric threads.
|
|
462-354-080488 Eyebolt with shoulder helps spread the load over a broader area. Machined AISI 304 stainless steel. Metric threads.
A: 5/16" - 8 mm", B: 4-5/16", C: 5/8", D: 3", E: 1", Pkg.: Bulk
Sold: Each
|
|
462-354-080495 Eyebolt with shoulder helps spread the load over a broader area. Machined AISI 304 stainless steel. Metric threads.
A: 3/8" - 10 mm", B: 3-3/8", C: 5/8", D: 1-15/16", E: 1-3/16", Pkg.: Bulk
Sold: Each
|
|
462-354-080499 Eyebolt with shoulder helps spread the load over a broader area. Machined AISI 304 stainless steel. Metric threads.
A: 3/8" - 10 mm", B: 5-3/8", C: 5/8", D: 3-15/16", E: 1-3/16", Pkg.: Bulk
Sold: Each
|
|
462-354-080483 Eyebolt with shoulder helps spread the load over a broader area. Machined AISI 304 stainless steel. Metric threads. A: 5/16" - 8 mm, B: 2-9/16" , C: 9/16" , D: 1-5/16" , E: 1" , Pkg.: Bulk Machined AISI 304 stainless steel. Metric threads.
|
|
462-698-AS3719 Eyebolt/Clamp Plate Assembly for Gusher 10 Pump Description: Bushed eyebolt and clamping plate assembly, Fits: Gusher 10 Sold: Each
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO ->
- 011802 (NTSC Model):
- High Res. 650TV Lines (Color) / 700 TV Lines (B/W)
- Video Output: 1/0Vp-p Composite 75
- 1/3" Sony 960H CCD Image Sensor
- 3.6mm Lens with wide 768 x 494 angle
- 1-3/8" Hole size
- 011803 (HD Model):
- High Res. 1920 x 1080p
- Video Output: 1/0Vp-p Composite 75
- 1/2.7" High Sensitivity Progressive CMOS Sensor
- 4.06mm Fixed Lens
- 1-3/8" Hole size
|
|
462-757-EZ76010 EZ-Steer Evinrude E-Tec Main Engine Outboard Bracket.
|
|
462-757-EZ60010 EZ-Steer Large Outboard Bracket Assembly, 2-Stroke.
For: Main Engine
|
|
462-757-EZ50010 EZ-Steer Long-Shaft Bracket Assembly (Standard 2-Stroke or 4-Stroke), 4".
|
|
462-757-EZ10001 Patented, self-adjusting Stainless rod attaches your boat's main engine to the auxiliary engine. The rod consists of an inner and outer tube, that slide one inside the other and utilize the patented EZ-Steer Detente System Adjustment. The detente provides precise tension that allows for varying rod lengths as the two engines tilt independently. The user can tilt either engine up or down while maintaining steering control of both engines simultaneously.
- The self-adjusting rod is pre-set to approximately 18-20 lbs. of pressure and can be adjusted if necessary
- Length is center-to-center in down position
- Length: 19"-22"
|
|
462-757-EZ10002 Patented, self-adjusting Stainless rod attaches your boat's main engine to the auxiliary engine. The rod consists of an inner and outer tube, that slide one inside the other and utilize the patented EZ-Steer Detente System Adjustment. The detente provides precise tension that allows for varying rod lengths as the two engines tilt independently. The user can tilt either engine up or down while maintaining steering control of both engines simultaneously.
- The self-adjusting rod is pre-set to approximately 18-20 lbs. of pressure and can be adjusted if necessary.
- Length is center-to-center in down position
- Length: 23"-26"
|
|
