464-270200-1 Deck Hinge 90° SS
Seadog Deck Hinge Fittings are made from investment cast 316 stainless steel.
- Base: 3/4" x 2-1/4"
- Pin size: 1/4"
|
|
464-270210-1 Deck Hinge 90° SS Removable Pin
Seadog Deck Hinge Fittings are made from investment cast 316 stainless steel.
- Base: 3/4" x 2-1/4"
- Pin size: 1/4"
|
|
464-273230-1 Deck Hinge Angled Black Nylon
The Seadog Nylon Angled Deck Hinges are made from injection molded nylon.
- Color: Black
- Base size: 7/8" x 2-7/16"
- Pin size: 3/16"
|
|
464-273231-1 Deck Hinge Angled White Nylon
The Seadog Nylon Angled Deck Hinges are made from injection molded nylon.
- Color: white
- Base size: 7/8" x 2-7/16"
- Pin size: 3/16"
|
|
462-354-2732851 Injection molded nylon. Slide combination with Filister lock screw for .850 track. Port and starboard. Includes nylon track slide. Color: Black, Pin: 3/16" Bolt", Size: 2-7/16" L x 7/8" W ", Pack: 2 Sold: Pack
|
|
462-354-2732861 Injection molded nylon. Slide combination with Filister lock screw for .850 track. Port and starboard. Includes nylon track slide. Color: White, Pin: 3/16" Bolt", Size: 2-7/16" L x 7/8" W ", Pack: 2 Sold: Pack
|
|
464-273200-1 DECK HINGE NYLON Black LG 2PK
The Seadog Nylon Hinge Fittings are made from injection molded nylon.
- Colors: Black
- Base size: 2-7/16"L x 13/16"W
- Pin size: 3/16"
|
|
464-273205-1 Deck Hinge Nylon Small Black
The Seadog Nylon Hinge Fittings are made from injection molded nylon.
- Colors: Black
- Base size: 2-3/8"L x 13/16"W
- Pin size: 3/16"
|
|
464-273201-1 Deck Hinge Nylon White Large
The Seadog Nylon Hinge Fittings are made from injection molded nylon.
- Color: White
- Base size: 2-7/16"L x 13/16"W
- Pin size: 3/16"
|
|
464-273250-1 Deck Hinge Side Mount Nylon Black
The Seadog Nylong Angled Deck Hinges are made from injection molded nylon.
- Color: Black
- Base size: 7/8"L x 2-7/16"W
- Pin size: 3/16"
|
|
462-354-3274101 New recessed base design allows for a water tight seal without the use of gaskets. Use fastener #10FH.
Size: 7/16" x 2", Pack: 1 pr.
Sold: Pack
|
|
462-49-G844W Has UV stabilized resin and an O-ring seal. Locking center.
ID: 9-1/4", OD: 12-1/2", Hole: 10-1/2", Color: Stark White
Sold: Each
|
|
462-49-G840W Has UV stabilized resin and an O-ring seal. Locking center.
ID: 7-5/16", OD: 10-9/16", Hole: 8-1/2", Color: Stark White
Sold: Each
|
|
462-354-3356991 Fits all cast stainless steel Sea Dog Deck Fill Caps. Formed 304 stainless steel.
Size: 7"
Sold: Each
|
|
462-9-124878DP Plain zinc. 1-1/2" key has 1" spade on handle that allows them to fit many other slot type opening deck plates. Material: Plastic, Length: 3-3/8", Size: 1-1/4" & 1-1/2", Case: 10
|
|
464-351399-1 DECK PLATE KEY SS
Seadog Deck Plate Keys are constructed of stainless steel or nylon. They have a lug span of 1-3/16" center to center.
|
|
464-357399-1 Deck Plate Key Nylon
Seadog Deck Plate Keys are constructed of stainless steel or nylon. They have a lug span of 1-3/16" center to center.
|
|
462-354-3280131 Injection molded rubber/stamped 304 stainless steel.
A: 3-3/8", B: 8-7/8", C: 8-3/16", Fastener: #8 FH, Pack: 2, Case: 10
Sold: Pack
|
|
462-27-1810125 Automatically raise or lower your anchor. 12 volt operation. Special anti-drag system senses bottom to allow for controlled drifting. Then, at the touch of a button, lock the winch to prevent drifting. Anchor not included.
DH-25: Pre spooled with 60' of 800 lb test nylon rope. Includes remote mountable anchor davit. Consistent hole pattern with older DeckHand models.
Description: DH-25, Max Capacity: 25 lbs.
Sold: Each
|
|
462-27-1810126 Automatically raise or lower your anchor. 12 volt operation. Special anti-drag system senses bottom to allow for controlled drifting. Then, at the touch of a button, lock the winch to prevent drifting. Anchor not included.
Pre spooled with 60' of 800 lb test nylon rope. Includes remote mountable anchor davit and 12' corded remote control.
Description: DH-25R w/ 12' Corded Remote Control, Max Capacity: 25 lbs.
Sold: Each
|
|
