Generic

Sold in standard packs only

Model #: 824, Pack: 4

Sold: Each

• 3 Spoke design
• Black plastic wheel rim
• Fits standard 3/4" tapered shaft
• Diameter: 13.5"

Charging valve for Pro extractor.

Description: Valve , For: 756015P

Sold: Each

Description: S.S. Receptacle w/Cap, Case: 12

The Quick Connect system can be used by anyone to install additional outlets or to replumb your boat or recreational vehicle. Whale Quick Connect fittings offer many benefits, all ensuring a high integrity plumbing system. The pipework's flexibility enables tight bends to be formed, hence reducing both the number of fittings and time required at installation. Whale Quick Connectsemi-rigid pipework offers the integrity of metal, but the usability of plastic, and is fully tested and recommended for use with the complete range of Whale fittings.

• Unique ?Double Gripper' design provides secure lifelong pipework retention even at excessive pressures


• The innovative ?cage collet' eliminates leaks where fittings are installed close to tight bends


• Collet has internal support ring ensuring o ring seal is held in position and does not distort or leak under pressure


• High integrity single piece moulding improves the strength of the fittings


• Outer sleeve incorporates collet cover, thus preventing accidental pipework release


• Collet clips are not necessary and therefore reduce installation time


• Pipework includes measured cut marks, designed to be a visual guide to ensure that fittings are pushed fully home

• Unique 'Double Gripper' design provides secure lifelong pipework retention even at excessive pressures


• The innovative 'cage collet' eliminates leaks where fittings are installed close to tight bends


• Collet has internal support ring ensuring o ring seal is held in position and does not distort or leak under pressure


• High integrity single piece moulding improves the strength of the fittings


• Outer sleeve incorporates collet cover, thus preventing accidental pipework release


• Collet clips are not necessary and therefore reduce installation time


• Pipework includes measured cut marks, designed to be a visual guide to ensure that fittings are pushed fully home

Description: Stem Check Valve 15mm

Sold: Each

Forged bronze wire.

Finish: Chrome, A: 3/8", B: 1/2", C: 1-3/4", Fastener: #10 FH, Pack: Bulk

Sold: Each

Forged bronze wire.

Finish: Chrome, A: 3/8", B: 1/2", C: 1-3/4", Fastener: #10 FH, Pack: 2

Sold: Pack

Chrome Zinc Round Base 60° 7/8"

The Seadog Base Rail Fittings have a die cast zinc construction with a chrome plated finish.

• 7/8" Tube O.D.
• Base: 2-5/8"

Chrome Zinc Round Base 90° 7/8"

The Seadog Base Rail Fittings have a die cast zinc construction with a chrome plated finish.

• 7/8" Tube O.D.
• Base: 2-5/8"

1699-07698 Chris Craft Heat Exchanger, Chris Craft 283-327 V8 Model F. Also replaces Sen-Dure Model #1051-1-5.
The end castings from your old heat exchanger are required to make this custom order par.

1699-08003 Chris Craft Heat Exchanger

For: Chris Craft Ford 427 CID V8, also replaces Sen-Dure Model #1067-2-5.

The end castings from your old heat exchanger are required to make this custom order part.

1699-08336 Chris Craft Heat Exchanger, Chris Craft 350 V8 Model Q. Also replaces Sen-Dure Model #1375-2-5.
The end castings from your old heat exchanger are required to make this custom order part.

1699-08763 Chris Craft Heat Exchanger for Chris Craft 454 Model K. Also replaces Sendure #2148-2-5.

1699-08771 Chris Craft Heat Exchanger for Chris Craft Model 305-350 K. Also replaces Sendure #2196-4-5.

1699-07351 Chris Craft Oil Cooler Exact replacement used on Chris Craft Model 283-327F.

"Chrome plated zinc cowl with black plastic base. 3" Duct hose threads into neck. Hose clamps not required. Mouth opening is 7 square inches. Screw size is #8."

Size: 5-3/4" L x 4-3/8" W 2-5/8" H "

Sold: Each

Chrome plated zinc. Black plastic flange and cap. With strap. Grounding screw included. Use #6 fasteners.

Type: Gas w/o Lock, Length: 1-7/8", Hose: 1-1/2", Fastener: #6

Sold: Each

Chrome plated. Black plastic base.

Size: 6-1/4" L x 1" H ", Fastener: 1/4", Pack: 2

Sold: Pack

Black plastic cap with built-in five pin tumbler lock. Supplied with two keys. Gasketed to prevent possible moisture from entering the tank. This locking cap will fit all Perko Chromalex gas fills already in use. Skin packed.

Fits: 1313, 1399, Size: 1-15/32" OD"

Sold: Each

Chrome plated zinc. Black plastic flange and cap. With strap. Grounding screw included. Use #6 fasteners.

Type: Gas w/ Lock, Length: 1-7/8", Hose: 1-1/2", Fastener: #6

Sold: Each