Generic

The Lighted Handle Rings: 7000 Series attach easily to existing handles within the boat, including RDI’s Grab Handles. The Lighted Handle Rings (LHRs) are available in a variety of colors and sizes. These rings produce accent lighting, which allows boaters to see handles and navigate through the boat at night easier.

• Lighted Handle Rings exceed strength test standard of ABYC
• The LHRs fit between the Grab Handle and the installation surface
• LHRs are anchored in position by the stud of the Grab Rail and its attachment to the surface
• Low amperage draw
• Creates safer and easier-to-navigate boating environment
• Easy to install
• Sold in pairs

• Charges at the speed required by specific devices
• Internal filtering for reduced electronic interference
• Over temperature protection
• Protective dust cap keeps debris and moisture out
• Conformal coated circuit board for the harsh marine environment
• Regulatory RoHS, CE Certified

Mounts in a common 1-1/8" (29 mm) diameter hole

Description: Socket Mount, Input: 9V-32V, Output: 5V, 4.8A

Heavy duty circuit protection when switching and circuit protection are both required. Single lever operation is clearly visible. Ignition protected (conforming to SAE J1171), safe for installation aboard gas-powered boats. Weather resistant. 5/16-18 terminal studs. Maximum voltage 42 volts DC.

Amps: 30, Mount: Panel

Heavy duty circuit protection when switching and circuit protection are both required. Single lever operation is clearly visible. Ignition protected (conforming to SAE J1171), safe for installation aboard gas-powered boats. Weather resistant. 5/16-18 terminal studs. Maximum voltage 42 volts DC.

Amps: 50, Mount: Panel

Heavy duty circuit protection when switching and circuit protection are both required. Single lever operation is clearly visible. Ignition protected (conforming to SAE J1171), safe for installation aboard gas-powered boats. Weather resistant. 5/16-18 terminal studs. Maximum voltage 42 volts DC.

Amps: 80, Mount: Panel

Heavy duty circuit protection when switching and circuit protection are both required. Single lever operation is clearly visible. Ignition protected (conforming to SAE J1171), safe for installation aboard gas-powered boats. Weather resistant. 5/16-18 terminal studs. Maximum voltage 42 volts DC.

Amps: 100, Mount: Panel

Heavy duty circuit protection when switching and circuit protection are both required. Single lever operation is clearly visible. Ignition protected (conforming to SAE J1171), safe for installation aboard gas-powered boats. Weather resistant. 5/16-18 terminal studs. Maximum voltage 42 volts DC.

Amps: 150, Mount: Panel

Heavy duty circuit protection when switching and circuit protection are both required. Single lever operation is clearly visible. Ignition protected (conforming to SAE J1171), safe for installation aboard gas-powered boats. Weather resistant. 5/16-18 terminal studs. Maximum voltage 42 volts DC.

Amps: 30, Mount: Surface

Heavy duty circuit protection when switching and circuit protection are both required. Single lever operation is clearly visible. Ignition protected (conforming to SAE J1171), safe for installation aboard gas-powered boats. Weather resistant. 5/16-18 terminal studs. Maximum voltage 42 volts DC.

Amps: 50, Mount: Surface

Heavy duty circuit protection when switching and circuit protection are both required. Single lever operation is clearly visible. Ignition protected (conforming to SAE J1171), safe for installation aboard gas-powered boats. Weather resistant. 5/16-18 terminal studs. Maximum voltage 42 volts DC.

Amps: 70, Mount: Surface

Heavy duty circuit protection when switching and circuit protection are both required. Single lever operation is clearly visible. Ignition protected (conforming to SAE J1171), safe for installation aboard gas-powered boats. Weather resistant. 5/16-18 terminal studs. Maximum voltage 42 volts DC.

Amps: 80, Mount: Surface

Heavy duty circuit protection when switching and circuit protection are both required. Single lever operation is clearly visible. Ignition protected (conforming to SAE J1171), safe for installation aboard gas-powered boats. Weather resistant. 5/16-18 terminal studs. Maximum voltage 42 volts DC.

Amps: 90, Mount: Surface

Heavy duty circuit protection when switching and circuit protection are both required. Single lever operation is clearly visible. Ignition protected (conforming to SAE J1171), safe for installation aboard gas-powered boats. Weather resistant. 5/16-18 terminal studs. Maximum voltage 42 volts DC.

Amps: 100, Mount: Surface

Heavy duty circuit protection when switching and circuit protection are both required. Single lever operation is clearly visible. Ignition protected (conforming to SAE J1171), safe for installation aboard gas-powered boats. Weather resistant. 5/16-18 terminal studs. Maximum voltage 42 volts DC.

Amps: 120, Mount: Surface

Heavy duty circuit protection when switching and circuit protection are both required. Single lever operation is clearly visible. Ignition protected (conforming to SAE J1171), safe for installation aboard gas-powered boats. Weather resistant. 5/16-18 terminal studs. Maximum voltage 42 volts DC.

Amps: 150, Mount: Surface

"Industry standard BusBar features tin-plated copper bus, 1/4" stainless steel studs and 8-32 terminal screws. Continuous rating 150 Amps AC/DC, maximum voltage 300 Volts AC, 48 Volts DC."

Gang: 20 with cover, Stud: 1/4"-20", Terminal Screw: #8-32

Sold: Each

"Provides medium duty circuit protection for 25 to 200 amp loads when switching and circuit protection are both required. "Trip-free" - cannot be held closed after trip. Visible reset lever shows open condition. Drop in replacement for 185-Series circuit breakers. Maximum operating voltage 48 volts DC. Meets SAE J1171 external ignition protection requirements. IP67-protected against immersion up to 1 meter for 30 minutes."

Amps: 70, Mount: Panel

"Provides medium duty circuit protection for 25 to 200 amp loads when switching and circuit protection are both required. "Trip-free" - cannot be held closed after trip. Visible reset lever shows open condition. Drop in replacement for 185-Series circuit breakers. Maximum operating voltage 48 volts DC. Meets SAE J1171 external ignition protection requirements. IP67-protected against immersion up to 1 meter for 30 minutes."

Amps: 80, Mount: Panel

"Provides medium duty circuit protection for 25 to 200 amp loads when switching and circuit protection are both required. "Trip-free" - cannot be held closed after trip. Visible reset lever shows open condition. Drop in replacement for 185-Series circuit breakers. Maximum operating voltage 48 volts DC. Meets SAE J1171 external ignition protection requirements. IP67-protected against immersion up to 1 meter for 30 minutes."

Amps: 100, Mount: Panel

"Provides medium duty circuit protection for 25 to 200 amp loads when switching and circuit protection are both required. "Trip-free" - cannot be held closed after trip. Visible reset lever shows open condition. Drop in replacement for 185-Series circuit breakers. Maximum operating voltage 48 volts DC. Meets SAE J1171 external ignition protection requirements. IP67-protected against immersion up to 1 meter for 30 minutes."

Amps: 120, Mount: Panel