150-L-04962 "F" Pump Tilt Ring
|
|
150-B-07558 Transom Assembly Bolt Kit
This Berkeley transom assembly bolt kit is comprised of all new stainless
hardware to install your transom assembly.
Includes:
- 8 Flat Head Bolts 2 inches long
- 2 Flat Head Screws
- 8 Washers
- 8 Nuts
|
|
150-S13166 Rubber Gasket for Transom Housing
|
|
150-B-06504 Berkeley Jet Transom Housing Seal Kit
This kit is all the items needed to install your
transom housing for correct sealing /p>
This kit includes:
- 1 Bowl O-Ring #S13731
- 1 Rubber Transom Gasket #S13166
- 1 Steering Tube Cushion #S13531
- 1 Reverse Cable Grommet #S09488
|
|
150-H-02503 Transom Housing, 0 Degrees To 9 Degrees
|
|
150-H-02079 Transom Housing, 9 Degrees To 18 Degrees (Standard)
|
|
150-S15904 Water Pipe Retainer
|
|
150-3000 Wedge Bolt Kit
This bolt kit is used for new droop snoot installations that include a 2 or 4
degree wedge. The comes with all stainless hardware, nozzle gaskets and
everything else you need to do the job right.
Includes:
- 2 Nozzle Gaskets
- 4 1.25" Bolts
- 4 1.50" Bolts
- 4 1.75" Bolts
- 8 Lock Washers
|
|
|
|
|
|
|
|
150-S14493 Hand Hole Wrench Fastener
|
|
150-S23085 #10 Lock washer
|
|
150-S17672 .005 Undersized Stainless Steel Wear Ring - I.D. Installed is 7.245-7.247
Each Berkeley wear ring is constructed from seamless stainless steel. By using a seamless wear ring Berkeley can CNC machine these wear rings to exacting tolerances. These wear rings are not stepped so that there is nowater deflection to the impeller.
|
|
150-S17673 .010 Undersized Stainless Steel Wear Ring - I.D. Installed is 7.240-7.242
Each Berkeley wear ring is constructed from seamless stainless steel.
By using a seamless wear ring Berkeley can CNC machine these wear rings to
exacting tolerances. These wear rings are not stepped so that there is no
water deflection to the impeller.
|
|
150-S15879 .015 Undersized Stainless Steel Wear Ring - I.D. Installed is 7.235-7.237
Each Berkeley wear ring is constructed from seamless stainless steel.
By using a seamless wear ring Berkeley can CNC machine these wear rings to
exacting tolerances. These wear rings are not stepped so that there is no
water deflection to the impeller.
|
|
150-S17674 .020 Undersized Stainless Steel Wear Ring - I.D. Installed is 7.230-7.232
Each Berkeley wear ring is constructed from seamless stainless steel.
By using a seamless wear ring Berkeley can CNC machine these wear rings to
exacting tolerances. These wear rings are not stepped so that there is no
water deflection to the impeller.
|
|
150-S17675 .025 Undersized Stainless Steel Wear Ring - I.D. Installed is 7.225-7.227
Each Berkeley wear ring is constructed from seamless stainless steel.
By using a seamless wear ring Berkeley can CNC machine these wear rings to
exacting tolerances. These wear rings are not stepped so that there is no
water deflection to the impeller.
|
|
150-S15880 .030 Undersized Stainless Steel Wear Ring - I.D. Installed is 7.220-7.222
Each Berkeley wear ring is constructed from seamless stainless steel.
By using a seamless wear ring Berkeley can CNC machine these wear rings to
exacting tolerances. These wear rings are not stepped so that there is no
water deflection to the impeller.
|
|
150-S15881 .045 Undersized Stainless Steel Wear Ring - I.D. Installed is 7.205-7.207
Each Berkeley wear ring is constructed from seamless stainless steel.
By using a seamless wear ring Berkeley can CNC machine these wear rings to
exacting tolerances. These wear rings are not stepped so that there is no
water deflection to the impeller.
|
|
150-S23087 1/4" Lock Washer
|
|
