|
|
|
150-S26618 Cotter Pin, 1/8" x 1/2"
|
|
|
|
|
150-S16167 Transom Seal Bellows
|
|
150-S15338D Double Drilled Billet Bearing Cap - Black Anodized
Double drilled for race applications, however can be used in normal 4 bolt applications as well. Billet Machined 6061 Aluminum and black anodized. Far superior to the original cast aluminum bearing cap.
|
|
150-3001 Droop Snoot Bolt Kit
This bolt kit is used for new droop snoot installations with NO wedge.
The comes with all stainless hardware and a nozzle gasket.
Includes:
|
|
150-2010 Berkeley Droop Snoot Kit
Droop Snoot Kit, includes Berkeley Original Droop Snoot, steering extension and includes gaskets & hardware.
|
|
150-3003 Droop Snoot Stud Kit
This is an installation kit for a droop snoot with NO Wedge. Comes
complete with all stainless hardware.
Includes:
- 8 Studs
- 8 Nuts
- 8 Lockwashers
|
|
150-2003 Berkeley Factory Jet Pump Rebuild For: Berkeley, American Turbine, Legend,
and Dominator
Each pump is disassembled, cleaned and inspected The shaft is checked for straightness The pump is then assembled using all new parts including your choice of aluminum impeller size, bearings (pre greased), impeller nut, seals, packing, bearing snap ring, impeller key-way and a complete gasket set Jet pumps are brought back to stock specifications and have a one year warranty on parts and labor
Only genuine Berkeley parts are used No inferior import pieces
Stage 2 - Disassemble, clean, inspect all parts:
- R&R parts (wear ring, bearings, bushings, seals)
- Machine parts as necessary for proper fit and
clearance (bearing cap shaft, impeller)
- Modify inlet side of impeller for less cavitation
and more flow.
- Lube and precision assemble.
- Add stuffer to bowl to improve water flow off
impeller into bowl
Note: Buyer assumes all costs regarding shipping pump to us for rebuild.
Please wait to be contacted by us before shipping pump.
|
|
150-2004 Berkeley Factory Jet Pump Rebuild For: Berkeley, American Turbine, Legend,
and Dominator
Each pump is disassembled, cleaned and inspected The shaft is checked for straightness The pump is then assembled using all new parts including your choice of aluminum impeller size, bearings (pre greased), impeller nut, seals, packing, bearing snap ring, impeller key-way and a complete gasket set Jet pumps are brought back to stock specifications and have a one year warranty on parts and labor
Only genuine Berkeley parts are used No inferior import pieces /p>
Stage 3 - Disassemble, clean, inspect all parts:
- R&R parts (wear ring, bearings, bushings, seals)
- Machine parts as necessary for proper fit and
clearance (bearing cap shaft, impeller)
- Modify inlet side of impeller for less cavitation
and more flow.
- Lube and precision assemble.
- Add stuffer to bowl to improve water flow off
impeller into bowl
- Modify bowl inlet vanes for smooth flow.
- Modify bowl outlet vanes for less turbulence
and straighter exit flow.
|
|
150-2005 Berkeley Factory Jet Pump Rebuild For: Berkeley, American Turbine, Legend,
and Dominator
Each pump is disassembled, cleaned and inspected The shaft is checked for straightness The pump is then assembled using all new parts including your choice of aluminum impeller size, bearings (pre greased), impeller nut, seals, packing, bearing snap ring, impeller key-way and a complete gasket set Jet pumps are brought back to stock specifications and have a one year warranty on parts and labor
Only genuine Berkeley parts are used No inferior import pieces /p>
Stage 4 - Disassemble, clean, inspect all parts:
- R&R parts (wear ring, bearings, bushings, seals)
- Machine parts as necessary for proper fit and
clearance (bearing cap shaft, impeller)
- Modify inlet side of impeller for less cavitation
and more flow.
- Lube and precision assemble.
- Add stuffer to bowl to improve water flow off
impeller into bowl
- Modify bowl inlet vanes for smooth flow.
- Modify bowl outlet vanes for less turbulence
and straighter exit flow.
- Double bolt suction piece, bowl, and bearing cap.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
150-L-02850 Gasket, Suction to Intake Adapter for Berkeley. Also replaces American Turbine G1006.
|
|
150-L-03495 G-Bowl
Supersedes: 152-J0495
To replace a single piece C-Bowl, you will need to purchase this G-Bowl and G Nozzle Housing 150-L-05026 (see related parts) and all necessary gaskets, bolts and pins. See G-Pump breakdown here.
|
|
150-M-05928 Grate Retainer
|
|
150-S14480 Grease Fitting
Supersedes: 152-J0480
|
|
150-S16549 Grease Fitting Cap
|
|
