430-MC-24-44187 Direct replacemet for MerCruiser part # 44187. - Fits Chevrolet in-line 6 cylinder 250 and 292 C.I.D. with 14" flywheel, Chevrolet V6 200, 201, 229 and 262 C.I.D. with 14" flywheel, Chevrolet V8 (Small Block) 265, 283, 305, 307, 327 and 350 C.I.D. with 14" flywheel and Chevrolet V8 (Big Block) 348, 396, 409, 427 and 454 C.I.D. with 14" flywheel (26 spline applications).
Manufactured by Barr Marine. Part number MC-24-44187.
|
|
430-1880 Complete Barr Marine exhaust kit for the MerCruiser Inline 6 Cylinder 165. Everything listed below is included in this kit, so the complete exhaust setup can be ordered under one part number. Kit includes: - (1) MC-1-58759 MerCruiser Inline 6 Cylinder 165 Exhaust Manifold. Direct replacement water cooled manifold to fit the 6 cyl. GM (Model 165) engine. Includes all plugs, gaskets and mounting hardware to the cylinder head. Replaces MerCruiser 58759A14, Osco 8759, Mallory 9-40500, HGE 8759 and Sierra 18-1960-1.
- (1) MC-20-60426 MerCruiser 4, 6 Cylinder, V8 Log Elbow Riser. Direct replacement exhaust elbow riser (utilizes a stainless steel sleeve at the water/air mixing area). Includes plugs, gasket and mounting hardware to mount to the manifold. Replaces MerCruiser 60426A1.
Fits MerCruiser straight 6 cylinder Model 165 (log style direct replacement). Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.''s are achieved after replacing an OEM manifold with Barr replacement parts. - 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).
Compatible parts: - MC-20-76351 direct replacement exhaust elbow riser.
- MC-20-61851A3 manifold to riser 3" spacer (single block). Includes all mounting hardware, gaskets and drain plug.
- 1-54870 direct replacement exhaust manifold rear end cap. Serial # 4481625 and below.
- 1-54870P rear end cap mounting package.
- 1-60252 direct replacement exhaust manifold end cap/connector.
- 1-60252P front end plate mounting package.
- MC-1-58759P exhaust manifold mounting package.
- MC-1-58764P manifold to carburetor adaptor mounting package.
- MC-20-55730 stainless steel fresh water cooling block off plate for use with MerCruiser riser #''s 60426, 76351 and 76771. Requires (2) gaskets part # MC47-27-52076.
- MC-20-60207 stainless steel block off plate (with vent hole) for use with MerCruiser riser #''s 60426, 76351 and 76771. Requires (2) gaskets part # MC47-2752076.
- MC-20-60426P exhaust riser elbow mounting package. For use with both MC-2060426 and MC-20-76351 risers.
- MC-29-47587 direct replacement lower thermostat housing.
- MC-29-60372 direct replacement upper thermostat housing.
- MC47-27-46401 direct replacement manifold to head gasket.
- MC47-27-48043 direct replacement exhaust manifold end cap/connector gasket (will fit both ends).
- MC47-27-73814 direct replacement exhaust manifold end cap gasket. Utilized with 1-73813 rear end cap.
- MC47-27-99777-3 direct replacement exhaust elbow to manifold gasket.
- MC-1-52390 direct replacement water cooled exhaust manifold. For serial # 3332138 and up.
- MC-1-65603 direct replacement water cooled exhaust manifold (starboard side).
- MC-1-65604 direct replacement water cooled exhaust manifold (port side).
- MC-1-77234 direct replacement water cooled exhaust manifold (port side).
- MC-1-77235 direct replacement water cooled exhaust manifold (starboard side).
- MC-20-76771 direct replacement exhaust elbow riser.
- MC-20-61851A2 manifold to riser 3" spacers (sold in pairs). Includes all mounting hardware, gaskets and drain plugs.
- MC-1-52390P exhaust manifold mounting package.
- MC-1-6560P manifold mounting package.
- MC-1-77234P manifold mounting package.
- MC-27-48104 alternator mounting bracket.
- MC-29-47441 upper thermostat housing.
- MC-29-62898 upper thermostat housing.
- MC-29-63588 lower thermostat housing.
- MC-29-78984 lower thermostat housing.
- MC47-27-33395 direct replacement exhaust manifold to head gasket.
- MC47-27-33395A2 exhaust manifold gasket set.
- MC47-27-52076 direct replacement exhaust elbow to exhaust manifold gasket.
- MC47-27-53354 direct replacement exhaust manifold to cylinder head gasket.
- MC47-27-53354A1 exhaust manifold gasket set.
- MC47-27-73866 direct replacement exhaust manifold to head gasket.
- MC47-488 KIT thermostat kit (includes gasket and thermostat).
Composite kit picture Shown is for reference only. See list of included parts above in the description. Composite kit picture shown is for reference only. See list of included parts above in the description.
|
|
430-1890 Complete Barr Marine exhaust kit for the MerCruiser Inline 6 Cylinder 165. Everything listed below is included in this kit, so the complete exhaust setup can be ordered under one part number. Kit includes: - (1) MC-1-58759 MerCruiser Inline 6 Cylinder 165 Exhaust Manifold. Direct replacement water cooled manifold to fit the 6 cyl. GM (Model 165) engine. Includes all plugs, gaskets and mounting hardware to the cylinder head. Replaces MerCruiser 58759A14, Osco 8759, Mallory 9-40500, HGE 8759 and Sierra 18-1960-1.
- (1) MC-20-60426 MerCruiser 4, 6 Cylinder, V8 Log Elbow Riser. Direct replacement exhaust elbow riser (utilizes a stainless steel sleeve at the water/air mixing area). Includes plugs, gasket and mounting hardware to mount to the manifold. Replaces MerCruiser 60426A1.
- (1) MC-20-61851A3 MerCruiser 4 and 6 Cylinder Riser Spacer Block 3 Inch. Manifold to riser 3" spacer (single block). Includes all mounting hardware, gaskets and drain plug. Each spacer block kit includes the spacer block(s) and the corresponding package to mount. Replaces MerCruiser 61851A3.
Fits MerCruiser straight 6 cylinder Model 165 (log style direct replacement). Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.''s are achieved after replacing an OEM manifold with Barr replacement parts. - 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).
Compatible parts: - MC-20-76351 direct replacement exhaust elbow riser.
- 1-54870 direct replacement exhaust manifold rear end cap. Serial # 4481625 and below.
- 1-54870P rear end cap mounting package.
- 1-60252 direct replacement exhaust manifold end cap/connector.
- 1-60252P front end plate mounting package.
- MC-1-58759P exhaust manifold mounting package.
- MC-1-58764P manifold to carburetor adaptor mounting package.
- MC-20-55730 stainless steel fresh water cooling block off plate for use with MerCruiser riser #''s 60426, 76351 and 76771. Requires (2) gaskets part # MC47-27-52076.
- MC-20-60207 stainless steel block off plate (with vent hole) for use with MerCruiser riser #''s 60426, 76351 and 76771. Requires (2) gaskets part # MC47-2752076.
- MC-20-60426P exhaust riser elbow mounting package. For use with both MC-2060426 and MC-20-76351 risers.
- MC-29-47587 direct replacement lower thermostat housing.
- MC-29-60372 direct replacement upper thermostat housing.
- MC47-27-46401 direct replacement manifold to head gasket.
- MC47-27-48043 direct replacement exhaust manifold end cap/connector gasket (will fit both ends).
- MC47-27-73814 direct replacement exhaust manifold end cap gasket. Utilized with 1-73813 rear end cap.
- MC47-27-99777-3 direct replacement exhaust elbow to manifold gasket.
- MC-1-52390 direct replacement water cooled exhaust manifold. For serial # 3332138 and up.
- MC-1-65603 direct replacement water cooled exhaust manifold (starboard side).
- MC-1-65604 direct replacement water cooled exhaust manifold (port side).
- MC-1-77234 direct replacement water cooled exhaust manifold (port side).
- MC-1-77235 direct replacement water cooled exhaust manifold (starboard side).
- MC-20-76771 direct replacement exhaust elbow riser.
- MC-20-61851A2 manifold to riser 3" spacers (sold in pairs). Includes all mounting hardware, gaskets and drain plugs.
- MC-1-52390P exhaust manifold mounting package.
- MC-1-6560P manifold mounting package.
- MC-1-77234P manifold mounting package.
- MC-27-48104 alternator mounting bracket.
- MC-29-47441 upper thermostat housing.
- MC-29-62898 upper thermostat housing.
- MC-29-63588 lower thermostat housing.
- MC-29-78984 lower thermostat housing.
- MC47-27-33395 direct replacement exhaust manifold to head gasket.
- MC47-27-33395A2 exhaust manifold gasket set.
- MC47-27-52076 direct replacement exhaust elbow to exhaust manifold gasket.
- MC47-27-53354 direct replacement exhaust manifold to cylinder head gasket.
- MC47-27-53354A1 exhaust manifold gasket set.
- MC47-27-73866 direct replacement exhaust manifold to head gasket.
- MC47-488 KIT thermostat kit (includes gasket and thermostat).
- MC-1-95862 direct replacement water cooled manifold (Rochester (3 1/4" X 1 7/8") bolt pattern). 6 bolt mounting.
- MC-1-96705 direct replacement water cooled manifold (Rochester (3 1/4" X 1 7/8") bolt pattern). 6 bolt mounting.
- MC-1-99798 direct replacement water cooled manifold (MerCarb (3 11/16" X 2") bolt pattern). 6 bolt mounting.
- MC-20-12076 direct replacement exhaust riser.
- MC-20-76325 direct replacement exhaust riser.
- MC-1-99798P exhaust manifold to cylinder head mounting package.
- MC47-27-96429 direct replacement exhaust manifold to cylinder head gasket.
Composite kit picture Shown is for reference only. See list of included parts above in the description. Composite kit picture shown is for reference only. See list of included parts above in the description.
|
|
430-1900 Complete Barr Marine exhaust kit for the MerCruiser Inline 6 Cylinder 165. Everything listed below is included in this kit, so the complete exhaust setup can be ordered under one part number. Kit includes: - (1) MC-1-58759 MerCruiser Inline 6 Cylinder 165 Exhaust Manifold. Direct replacement water cooled manifold to fit the 6 cyl. GM (Model 165) engine. Includes all plugs, gaskets and mounting hardware to the cylinder head. Replaces MerCruiser 58759A14, Osco 8759, Mallory 9-40500, HGE 8759 and Sierra 18-1960-1.
- (1) MC-20-76351 MerCruiser 4, 6 Cylinder, V8 Log Elbow Riser. Direct replacement exhaust elbow riser. Not pictured. Includes plugs, gasket and mounting hardware to mount to the manifold. Replaces MerCruiser 76351A2, Osco 6351, Mallory 9-40558, HGE 6351, Sierra 18-1971 and GLM 51120.
Fits MerCruiser straight 6 cylinder Model 165 (log style direct replacement). Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.''s are achieved after replacing an OEM manifold with Barr replacement parts. - 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).
Compatible parts: - MC-20-60426 direct replacement exhaust elbow riser (utilizes a stainless steel sleeve at the water/air mixing area).
- MC-20-61851A3 manifold to riser 3" spacer (single block). Includes all mounting hardware, gaskets and drain plug.
- 1-54870 direct replacement exhaust manifold rear end cap. Serial # 4481625 and below.
- 1-54870P rear end cap mounting package.
- 1-60252 direct replacement exhaust manifold end cap/connector.
- 1-60252P front end plate mounting package.
- MC-1-58759P exhaust manifold mounting package.
- MC-1-58764P manifold to carburetor adaptor mounting package.
- MC-20-55730 stainless steel fresh water cooling block off plate for use with MerCruiser riser #''s 60426, 76351 and 76771. Requires (2) gaskets part # MC47-27-52076.
- MC-20-60207 stainless steel block off plate (with vent hole) for use with MerCruiser riser #''s 60426, 76351 and 76771. Requires (2) gaskets part # MC47-2752076.
- MC-20-60426P exhaust riser elbow mounting package. For use with both MC-2060426 and MC-20-76351 risers.
- MC-29-47587 direct replacement lower thermostat housing.
- MC-29-60372 direct replacement upper thermostat housing.
- MC47-27-46401 direct replacement manifold to head gasket.
- MC47-27-48043 direct replacement exhaust manifold end cap/connector gasket (will fit both ends).
- MC47-27-73814 direct replacement exhaust manifold end cap gasket. Utilized with 1-73813 rear end cap.
- MC47-27-99777-3 direct replacement exhaust elbow to manifold gasket.
- MC-1-52390 direct replacement water cooled exhaust manifold. For serial # 3332138 and up.
- MC-1-65603 direct replacement water cooled exhaust manifold (starboard side).
- MC-1-65604 direct replacement water cooled exhaust manifold (port side).
- MC-1-77234 direct replacement water cooled exhaust manifold (port side).
- MC-1-77235 direct replacement water cooled exhaust manifold (starboard side).
- MC-20-76771 direct replacement exhaust elbow riser.
- MC-20-61851A2 manifold to riser 3" spacers (sold in pairs). Includes all mounting hardware, gaskets and drain plugs.
- MC-1-52390P exhaust manifold mounting package.
- MC-1-6560P manifold mounting package.
- MC-1-77234P manifold mounting package.
- MC-27-48104 alternator mounting bracket.
- MC-29-47441 upper thermostat housing.
- MC-29-62898 upper thermostat housing.
- MC-29-63588 lower thermostat housing.
- MC-29-78984 lower thermostat housing.
- MC47-27-33395 direct replacement exhaust manifold to head gasket.
- MC47-27-33395A2 exhaust manifold gasket set.
- MC47-27-52076 direct replacement exhaust elbow to exhaust manifold gasket.
- MC47-27-53354 direct replacement exhaust manifold to cylinder head gasket.
- MC47-27-53354A1 exhaust manifold gasket set.
- MC47-27-73866 direct replacement exhaust manifold to head gasket.
- MC47-488 KIT thermostat kit (includes gasket and thermostat).
Composite kit picture Shown is for reference only. See list of included parts above in the description. Composite kit picture shown is for reference only. See list of included parts above in the description.
|
|
430-1910 Complete Barr Marine exhaust kit for the MerCruiser Inline 6 Cylinder 165. Everything listed below is included in this kit, so the complete exhaust setup can be ordered under one part number. Kit includes: - (1) MC-1-58759 MerCruiser Inline 6 Cylinder 165 Exhaust Manifold. Direct replacement water cooled manifold to fit the 6 cyl. GM (Model 165) engine. Includes all plugs, gaskets and mounting hardware to the cylinder head. Replaces MerCruiser 58759A14, Osco 8759, Mallory 9-40500, HGE 8759 and Sierra 18-1960-1.
- (1) MC-20-76351 MerCruiser 4, 6 Cylinder, V8 Log Elbow Riser. Direct replacement exhaust elbow riser. Not pictured. Includes plugs, gasket and mounting hardware to mount to the manifold. Replaces MerCruiser 76351A2, Osco 6351, Mallory 9-40558, HGE 6351, Sierra 18-1971 and GLM 51120.
- (1) MC-20-61851A3 MerCruiser 4 and 6 Cylinder Riser Spacer Block 3 Inch. Manifold to riser 3" spacer (single block). Includes all mounting hardware, gaskets and drain plug. Each spacer block kit includes the spacer block(s) and the corresponding package to mount. Replaces MerCruiser 61851A3.
Fits MerCruiser straight 6 cylinder Model 165 (log style direct replacement). Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.''s are achieved after replacing an OEM manifold with Barr replacement parts. - 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).
Compatible parts: - MC-20-60426 direct replacement exhaust elbow riser (utilizes a stainless steel sleeve at the water/air mixing area).
- 1-54870 direct replacement exhaust manifold rear end cap. Serial # 4481625 and below.
- 1-54870P rear end cap mounting package.
- 1-60252 direct replacement exhaust manifold end cap/connector.
- 1-60252P front end plate mounting package.
- MC-1-58759P exhaust manifold mounting package.
- MC-1-58764P manifold to carburetor adaptor mounting package.
- MC-20-55730 stainless steel fresh water cooling block off plate for use with MerCruiser riser #''s 60426, 76351 and 76771. Requires (2) gaskets part # MC47-27-52076.
- MC-20-60207 stainless steel block off plate (with vent hole) for use with MerCruiser riser #''s 60426, 76351 and 76771. Requires (2) gaskets part # MC47-2752076.
- MC-20-60426P exhaust riser elbow mounting package. For use with both MC-2060426 and MC-20-76351 risers.
- MC-29-47587 direct replacement lower thermostat housing.
- MC-29-60372 direct replacement upper thermostat housing.
- MC47-27-46401 direct replacement manifold to head gasket.
- MC47-27-48043 direct replacement exhaust manifold end cap/connector gasket (will fit both ends).
- MC47-27-73814 direct replacement exhaust manifold end cap gasket. Utilized with 1-73813 rear end cap.
- MC47-27-99777-3 direct replacement exhaust elbow to manifold gasket.
- MC-1-52390 direct replacement water cooled exhaust manifold. For serial # 3332138 and up.
- MC-1-65603 direct replacement water cooled exhaust manifold (starboard side).
- MC-1-65604 direct replacement water cooled exhaust manifold (port side).
- MC-1-77234 direct replacement water cooled exhaust manifold (port side).
- MC-1-77235 direct replacement water cooled exhaust manifold (starboard side).
- MC-20-76771 direct replacement exhaust elbow riser.
- MC-20-61851A2 manifold to riser 3" spacers (sold in pairs). Includes all mounting hardware, gaskets and drain plugs.
- MC-1-52390P exhaust manifold mounting package.
- MC-1-6560P manifold mounting package.
- MC-1-77234P manifold mounting package.
- MC-27-48104 alternator mounting bracket.
- MC-29-47441 upper thermostat housing.
- MC-29-62898 upper thermostat housing.
- MC-29-63588 lower thermostat housing.
- MC-29-78984 lower thermostat housing.
- MC47-27-33395 direct replacement exhaust manifold to head gasket.
- MC47-27-33395A2 exhaust manifold gasket set.
- MC47-27-52076 direct replacement exhaust elbow to exhaust manifold gasket.
- MC47-27-53354 direct replacement exhaust manifold to cylinder head gasket.
- MC47-27-53354A1 exhaust manifold gasket set.
- MC47-27-73866 direct replacement exhaust manifold to head gasket.
- MC47-488 KIT thermostat kit (includes gasket and thermostat).
- MC-1-95862 direct replacement water cooled manifold (Rochester (3 1/4" X 1 7/8") bolt pattern). 6 bolt mounting.
- MC-1-96705 direct replacement water cooled manifold (Rochester (3 1/4" X 1 7/8") bolt pattern). 6 bolt mounting.
- MC-1-99798 direct replacement water cooled manifold (MerCarb (3 11/16" X 2") bolt pattern). 6 bolt mounting.
- MC-20-12076 direct replacement exhaust riser.
- MC-20-76325 direct replacement exhaust riser.
- MC-1-99798P exhaust manifold to cylinder head mounting package.
- MC47-27-96429 direct replacement exhaust manifold to cylinder head gasket.
Composite kit picture Shown is for reference only. See list of included parts above in the description. Composite kit picture shown is for reference only. See list of included parts above in the description.
|
|
430-MC-20-60426 Direct replacement exhaust elbow riser (utilizes a stainless steel sleeve at the water/air mixing area). Replaces MerCruiser 60426A1. Fits these applications: - MerCruiser 4 cylinder 181 C.I.D. 140 H.P., Model 140 engine (log style direct replacement).
- MerCruiser straight 6 cylinder Model 165 (log style direct replacement).
- MerCruiser V8 198, 228, 255, 260 and 898, inboard and stern drive units (log style direct replacement).
- MerCruiser V8 (Ford) 302 and 351 C.I.D., Models 188, 215, 225, 233, 255 and 888 inboard and I/O units (log style direct replacement).
Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.'s are achieved after replacing an OEM manifold with Barr replacement parts. - Replaces MerCruiser part #B-60426A1.
- Includes plugs, gasket and mounting hardware to mount to the manifold.
- 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).
Compatible parts: - MC-1-52390 direct replacement water cooled exhaust manifold. For serial # 3332138 and up.
- MC-1-58759 direct replacement water cooled manifold to fit the 6 cyl. GM (Model 165) engine.
- MC-1-65603 direct replacement water cooled exhaust manifold (starboard side).
- MC-1-65604 direct replacement water cooled exhaust manifold (port side).
- MC-1-77234 direct replacement water cooled exhaust manifold (port side).
- MC-1-77235 direct replacement water cooled exhaust manifold (starboard side).
- MC-20-76351 direct replacement exhaust elbow riser.
- MC-20-76771 direct replacement exhaust elbow riser.
- MC-20-61851A2 manifold to riser 3" spacers (sold in pairs). Includes all mounting hardware, gaskets and drain plugs.
- MC-20-61851A3 manifold to riser 3" spacer (single block). Includes all mounting hardware, gaskets and drain plug.
- 1-54870 direct replacement exhaust manifold rear end cap. Serial # 4481625 and below.
- 1-54870P rear end cap mounting package.
- 1-60252 direct replacement exhaust manifold end cap/connector.
- 1-60252P front end plate mounting package.
- MC-1-52390P exhaust manifold mounting package.
- MC-1-58759P exhaust manifold mounting package.
- MC-1-58764P manifold to carburetor adaptor mounting package.
- MC-1-6560P manifold mounting package.
- MC-1-77234P manifold mounting package.
- MC-20-55730 stainless steel fresh water cooling block off plate for use with MerCruiser riser #'s 60426, 76351 and 76771. Requires (2) gaskets part # MC47-27-52076.
- MC-20-60207 stainless steel block off plate (with vent hole) for use with MerCruiser riser #'s 60426, 76351 and 76771. Requires (2) gaskets part # MC47-2752076.
- MC-20-60426P exhaust riser elbow mounting package. For use with both MC-2060426 and MC-20-76351 risers.
- MC-27-48104 alternator mounting bracket.
- MC-29-47441 upper thermostat housing.
- MC-29-47587 direct replacement lower thermostat housing.
- MC-29-60372 direct replacement upper thermostat housing.
- MC-29-62898 upper thermostat housing.
- MC-29-63588 lower thermostat housing.
- MC-29-78984 lower thermostat housing.
- MC47-27-33395 direct replacement exhaust manifold to head gasket.
- MC47-27-33395A2 exhaust manifold gasket set.
- MC47-27-46401 direct replacement manifold to head gasket.
- MC47-27-48043 direct replacement exhaust manifold end cap/connector gasket (will fit both ends).
- MC47-27-52076 direct replacement exhaust elbow to exhaust manifold gasket.
- MC47-27-53354 direct replacement exhaust manifold to cylinder head gasket.
- MC47-27-53354A1 exhaust manifold gasket set.
- MC47-27-73814 direct replacement exhaust manifold end cap gasket. Utilized with 1-73813 rear end cap.
- MC47-27-73866 direct replacement exhaust manifold to head gasket.
- MC47-27-99777-3 direct replacement exhaust elbow to manifold gasket.
- MC47-488 KIT thermostat kit (includes gasket and thermostat).
Manufactured by Barr Marine. Part number MC-20-60426.
|
|
430-MC-20-76351 Direct replacement exhaust elbow riser. Replaces MerCruiser 76351A2, Osco 6351, Mallory 9-40558, HGE 6351, Sierra 18-1971 and GLM 51120. Fits these applications: - MerCruiser 4 cylinder 181 C.I.D. 140 H.P., Model 140 engine (log style direct replacement).
- MerCruiser straight 6 cylinder Model 165 (log style direct replacement).
- MerCruiser V8 198, 228, 255, 260 and 898, inboard and stern drive units (log style direct replacement).
- MerCruiser V8 (Ford) 302 and 351 C.I.D., Models 188, 215, 225, 233, 255 and 888 inboard and I/O units (log style direct replacement).
Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.'s are achieved after replacing an OEM manifold with Barr replacement parts. - Replaces MerCruiser part # B-76351A1.
- Not pictured.
- Includes plugs, gasket and mounting hardware to mount to the manifold.
- 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).
Compatible parts: - MC-1-52390 direct replacement water cooled exhaust manifold. For serial # 3332138 and up.
- MC-1-58759 direct replacement water cooled manifold to fit the 6 cyl. GM (Model 165) engine.
- MC-1-65603 direct replacement water cooled exhaust manifold (starboard side).
- MC-1-65604 direct replacement water cooled exhaust manifold (port side).
- MC-1-77234 direct replacement water cooled exhaust manifold (port side).
- MC-1-77235 direct replacement water cooled exhaust manifold (starboard side).
- MC-20-60426 direct replacement exhaust elbow riser (utilizes a stainless steel sleeve at the water/air mixing area).
- MC-20-76771 direct replacement exhaust elbow riser.
- MC-20-61851A2 manifold to riser 3" spacers (sold in pairs). Includes all mounting hardware, gaskets and drain plugs.
- MC-20-61851A3 manifold to riser 3" spacer (single block). Includes all mounting hardware, gaskets and drain plug.
- 1-54870 direct replacement exhaust manifold rear end cap. Serial # 4481625 and below.
- 1-54870P rear end cap mounting package.
- 1-60252 direct replacement exhaust manifold end cap/connector.
- 1-60252P front end plate mounting package.
- MC-1-52390P exhaust manifold mounting package.
- MC-1-58759P exhaust manifold mounting package.
- MC-1-58764P manifold to carburetor adaptor mounting package.
- MC-1-6560P manifold mounting package.
- MC-1-77234P manifold mounting package.
- MC-20-55730 stainless steel fresh water cooling block off plate for use with MerCruiser riser #'s 60426, 76351 and 76771. Requires (2) gaskets part # MC47-27-52076.
- MC-20-60207 stainless steel block off plate (with vent hole) for use with MerCruiser riser #'s 60426, 76351 and 76771. Requires (2) gaskets part # MC47-2752076.
- MC-20-60426P exhaust riser elbow mounting package. For use with both MC-2060426 and MC-20-76351 risers.
- MC-27-48104 alternator mounting bracket.
- MC-29-47441 upper thermostat housing.
- MC-29-47587 direct replacement lower thermostat housing.
- MC-29-60372 direct replacement upper thermostat housing.
- MC-29-62898 upper thermostat housing.
- MC-29-63588 lower thermostat housing.
- MC-29-78984 lower thermostat housing.
- MC47-27-33395 direct replacement exhaust manifold to head gasket.
- MC47-27-33395A2 exhaust manifold gasket set.
- MC47-27-46401 direct replacement manifold to head gasket.
- MC47-27-48043 direct replacement exhaust manifold end cap/connector gasket (will fit both ends).
- MC47-27-52076 direct replacement exhaust elbow to exhaust manifold gasket.
- MC47-27-53354 direct replacement exhaust manifold to cylinder head gasket.
- MC47-27-53354A1 exhaust manifold gasket set.
- MC47-27-73814 direct replacement exhaust manifold end cap gasket. Utilized with 1-73813 rear end cap.
- MC47-27-73866 direct replacement exhaust manifold to head gasket.
- MC47-27-99777-3 direct replacement exhaust elbow to manifold gasket.
- MC47-488 KIT thermostat kit (includes gasket and thermostat).
Manufactured by Barr Marine. Part number MC-20-76351.
|
|
430-MC-1-87114P Mounting package for mounting a MerCruiser center discharge exhaust manifold to engine cylinder head for MC-1-87114 V8 wet joint small block manifold Manufactured by Barr Marine. Part number MC-1-87114P.
|
|
430-MC-1-89011P Mounting package for mounting a MerCruiser center discharge exhaust manifold to engine cylinder head for MC-1-89011P V8 wet joint big block manifold Manufactured by Barr Marine. Part number MC-1-89011P.
|
|
430-MC-6-0001P Exhaust manifold plumbing fittings package for model 215. Fits these applications: - MerCruiser V8 (Ford) 302 and 351 C.I.D., all models (center riser generic).
- OMC V8 283, 302, 305, 307 and 350 C.I.D., all models (center riser generic).
- OMC (Ford) V8 302 and 351 C.I.D., all models (center riser generic).
Compatible parts: - CHV-1-83 water cooled center discharge manifold to fit the small block GM engine (3/4" N.P.T. cooling hose connections). All years.
- FM-1-83 water cooled center discharge manifold to fit the small block Ford engine (3/4" N.P.T. cooling hose connections). All years.
- 20-0082 water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 3" I.D. exhaust hose.
- 20-0100 water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 4" I.D. exhaust hose.
- 20-0097 3" spacer block (complete with mounting hardware, gasket and 3/4" pipe plug). Capable of stacking.
Manufactured by Barr Marine. Part number MC-6-0001P.
|
|
430-MC-29-79468 Lower Thermostat Housing - Models 330 (GM) Manufactured by Barr Marine. Part number MC-29-79468.
|
|
430-MC47-27-99757 Direct replacement manifold to head gasket. Replaces Mallory 9-61421, HGE 99757, Sierra 18-2909 and GLM 32170. Fits these applications: - MerCruiser V6 229 and 262 C.I.D., Models 185R, 185MR, 205R and 205MR (center riser direct replacement).
- OMC V6 4.3L Cobra, all models (center riser direct replacement).
- Volvo V6 4.3L Cobra, all models (center riser direct replacement).
Compatible parts: - MC-1-99746 direct replacement water cooled exhaust manifold.
- OMC-1-3857656 direct replacement exhaust manifold.
- MC-20-44354 direct replacement water cooled center discharge riser. Accepts 4" I.D. exhaust hose (8 degree angle).
- MC-20-98504 direct replacement water cooled center discharge riser. Accepts 3" I.D. exhaust hose (15 degree angle).
- OMC-20-913784 direct replacement exhaust riser/ elbow.
- VO-20-3862627 direct replacement exhaust riser/ elbow 11.3 "New style tall one piece".
- MC-20-93320A3 manifold to riser 3" spacer blocks (pair) with fastener and gasket package.
- MC-20-93322A3 manifold to riser 6" spacer blocks (pair) with fastener and gasket package.
Manufactured by Barr Marine. Part number MC47-27-99757.
|
|
430-MC47-27-73814 Direct replacement exhaust manifold end cap gasket. Replaces Sierra 18-0928 and GLM 30920. Fits these applications: - MerCruiser 4 cylinder 181 C.I.D. 140 H.P., Model 140 engine (log style direct replacement).
- MerCruiser 4 cylinder 153 and 181 C.I.D., 120 H.P. (2.5L) and 140 H.P. (3.0L), Models 120R and 140R-MR/Alpha 1 (log style direct replacement).
- MerCruiser straight 6 cylinder Model 165 (log style direct replacement).
- Utilized with 1-73813 rear end cap.
Compatible parts: - MC-1-52390 direct replacement water cooled exhaust manifold. For serial # 3332138 and up.
- MC-1-58759 direct replacement water cooled manifold to fit the 6 cyl. GM (Model 165) engine.
- MC-1-95862 direct replacement water cooled manifold (Rochester (3 1/4" X 1 7/8") bolt pattern). 6 bolt mounting.
- MC-1-96705 direct replacement water cooled manifold (Rochester (3 1/4" X 1 7/8") bolt pattern). 6 bolt mounting.
- MC-1-99798 direct replacement water cooled manifold (MerCarb (3 11/16" X 2") bolt pattern). 6 bolt mounting.
- MC-20-12076 direct replacement exhaust riser.
- MC-20-60426 direct replacement exhaust elbow riser (utilizes a stainless steel sleeve at the water/air mixing area).
- MC-20-76325 direct replacement exhaust riser.
- MC-20-76351 direct replacement exhaust elbow riser.
- MC-20-61851A3 manifold to riser 3" spacer (single block). Includes all mounting hardware, gaskets and drain plug.
Manufactured by Barr Marine. Part number MC47-27-73814.
|
|
430-MC47-27-41811 Direct replacement restrictor gasket. To be used with MC-20-87918 ((2) required per plate used). Replaces Osco 8503-GB, Mallory 9-61422, HGE 41811, Sierra 18-0672 and GLM 30220. Fits these applications: - MerCruiser V6 229 and 262 C.I.D., Models 185R, 185MR, 205R and 205MR (center riser direct replacement).
- MerCruiser V8 Models 898R, 228R and 260R (center riser direct replacement).
- MerCruiser V8 Models 330, 340 and 454 Magnum, inboard and stern drive units (center riser direct replacement).
- Replaces MerCruiser part # 27-41811.
Compatible parts: - MC-1-87114 direct replacement water cooled exhaust manifold.
- MC-1-89011 direct replacement water cooled exhaust manifold.
- MC-1-99746 direct replacement water cooled exhaust manifold.
- MC-20-44354 direct replacement water cooled center discharge riser. Accepts 4" I.D. exhaust hose (8 degree angle).
- MC-20-98502 direct replacement water cooled center discharge riser. Accepts 3" I.D. exhaust hose (0 degree angle).
- MC-20-98504 direct replacement water cooled center discharge riser. Accepts 3" I.D. exhaust hose (15 degree angle).
- MC-20-93320A3 manifold to riser 3" spacer blocks (pair) with fastener and gasket package.
- MC-20-93322A3 manifold to riser 6" spacer blocks (pair) with fastener and gasket package.
Manufactured by Barr Marine. Part number MC47-27-41811.
|
|
430-MC-20-99208P MerCruiser center discharge restrictor plate. Made of stainless steel.
- Includes gaskets and plate.
Manufactured by Barr Marine. Part number MC-20-99208P.
|
|
430-MC-20-60426P Exhaust riser elbow mounting package. Replaces Mallory 9-40170. Fits these applications: - MerCruiser 4 cylinder 181 C.I.D. 140 H.P., Model 140 engine (log style direct replacement).
- MerCruiser straight 6 cylinder Model 165 (log style direct replacement).
- MerCruiser V8 198, 228, 255, 260 and 898, inboard and stern drive units (log style direct replacement).
- MerCruiser V8 (Ford) 302 and 351 C.I.D., Models 188, 215, 225, 233, 255 and 888 inboard and I/O units (log style direct replacement).
Compatible parts: - MC-1-52390 direct replacement water cooled exhaust manifold. For serial # 3332138 and up.
- MC-1-58759 direct replacement water cooled manifold to fit the 6 cyl. GM (Model 165) engine.
- MC-1-65603 direct replacement water cooled exhaust manifold (starboard side).
- MC-1-65604 direct replacement water cooled exhaust manifold (port side).
- MC-1-77234 direct replacement water cooled exhaust manifold (port side).
- MC-1-77235 direct replacement water cooled exhaust manifold (starboard side).
- MC-20-60426 direct replacement exhaust elbow riser (utilizes a stainless steel sleeve at the water/air mixing area).
- MC-20-76351 direct replacement exhaust elbow riser.
- MC-20-76771 direct replacement exhaust elbow riser.
- MC-20-61851A2 manifold to riser 3" spacers (sold in pairs). Includes all mounting hardware, gaskets and drain plugs.
- MC-20-61851A3 manifold to riser 3" spacer (single block). Includes all mounting hardware, gaskets and drain plug.
Manufactured by Barr Marine. Part number MC-20-60426P.
|
|
430-MC-20-44354P Mounting package for MC-20-44354 riser. Replaces Mallory 9-40578. Fits these applications: - MerCruiser V6 229 and 262 C.I.D., Models 185R, 185MR, 205R and 205MR (center riser direct replacement).
- MerCruiser V8 Models 898R, 228R and 260R (center riser direct replacement).
- MerCruiser V8 Models 330, 340 and 454 Magnum, inboard and stern drive units (center riser direct replacement).
Compatible parts: - MC-1-87114 direct replacement water cooled exhaust manifold.
- MC-1-89011 direct replacement water cooled exhaust manifold.
- MC-1-99746 direct replacement water cooled exhaust manifold.
- MC-20-44354 direct replacement water cooled center discharge riser. Accepts 4" I.D. exhaust hose (8 degree angle).
- MC-20-98502 direct replacement water cooled center discharge riser. Accepts 3" I.D. exhaust hose (0 degree angle).
- MC-20-98504 direct replacement water cooled center discharge riser. Accepts 3" I.D. exhaust hose (15 degree angle).
- MC-20-93320A3 manifold to riser 3" spacer blocks (pair) with fastener and gasket package.
- MC-20-93322A3 manifold to riser 6" spacer blocks (pair) with fastener and gasket package.
Manufactured by Barr Marine. Part number MC-20-44354P.
|
|
430-MC-20-55538P Riser to exhaust manifold mounting package. Replaces Mallory 9-40571. Fits MerCruiser 4 cylinder 153 C.I.D. 120 H.P., Model 120 engine (log style direct replacement). Compatible parts: - MC-1-63122 direct replacement water cooled exhaust manifold.
- MC-20-55538 direct replacement exhaust elbow/ riser.
Manufactured by Barr Marine. Part number MC-20-55538P.
|
|
430-MC-20-72963P Exhaust riser elbow mounting package. Fits these applications: - MerCruiser V8 225, 250, 255, 270 and 280, inboard and stern drive units (log style direct replacement).
- MerCruiser V8 325, 330, 350, 370 and 400, inboard and stern drive units (log style direct replacement).
Compatible parts: - MC-1-47735 direct replacement water cooled exhaust manifold (port side).
- MC-1-47736 direct replacement water cooled exhaust manifold (starboard side).
- MC-1-47737 direct replacement water cooled exhaust manifold (port side).
- MC-1-47738 direct replacement water cooled exhaust manifold (starboard side).
- MC-20-72963 direct replacement exhaust elbow riser.
- MC-20-76668 direct replacement exhaust elbow riser.
- MC-20-61811A4 manifold to riser 3" spacers (sold in pairs). Includes all mounting hardware, gaskets and drain plugs.
Manufactured by Barr Marine. Part number MC-20-72963P.
|
|
430-MC-20-76325P Mounting package for MerCruiser exhaust riser MC-20-76325. - Includes gasket and bolts.
Manufactured by Barr Marine. Part number MC-20-76325P.
|
|
