SEI Marine Products

2 Qts of SEI HP Gear Lube and a Quart Size Gear Lube Pump with 3/8-16 Adapter.
Does not include adaptor for Yamaha

Gear Lube pump for quart sized bottles. Includes a metal adapter with 3/8-16 threads.
Not for use on Yamaha or Suzuki

Includes all seals, o'rings, bearings and gears for the lower unit.

Mercury / Mariner 3.0 liter outboards (Fleetmaster units only)
1.75:1 ratio 12 / 21 tooth count
1994 - 1999 units with 3.265" OD & 1.875" ID forward bearing
Single upper driveshaft bearing
Ratcheting clutch

GEAR REPAIR KIT Fits Mercury Repair Kit 91-216-805K

Gear Set 1.47
Fits 1973 and newer I, R, MR, Alpha I drives. Gen II drives Serial Number 0K999999 and below

Gear Set 1.81
Fits 1973 and newer I, R, MR, Alpha I drives. Gen II drives Serial Number 0K999999 and below

Fits 1973 and newer I, R, MR, Alpha I drives.
Also fits Gen II drives Serial Number 0K999999 and below.

Fits Mercury & Mariner 2.0 / 2.4 / 2.5 liter engines
Standard rotation, non-ratcheting
Fits 3.265" Diameter forward bearing only
15/28 Teeth 1.87:1 Ratio

Fits Mercury & Mariner 2.0 / 2.4 / 2.5 liter engines
Standard rotation, non-ratcheting
Fits 3.265" Diameter forward bearing only
14/28 Teeth 2:1 Ratio

Fits Mercury/Mariner L3 & L4 1987 to Current.
Also fits some "Bigfoot" 30-65 HP.
Also fits most Force 90-120 HP, 1995-1999.
6 Jaw reverse only.
Includes drain plugs.

For use with two bolt style propshaft bearing carrier.
4.750" Diameter Bullet.
Has provisions for pitot hook-up.
Comes with pinion bearing, drain plugs and water intake screens.
Also used on some V4 engines.

Fits most Mercury / Mariner 2.0, 2.4 & 2.5 Liter V6 engines.
4 3/4" bullet diameter.
3.265" OD forward bearing.
Includes, pinion bearing, alignment dowels,drain plugs and mounting studs.

Fits all V4 2 stroke Yamahas, 115-130 Hp.
4 1/4" Bullet diameter.
Includes pinion bearing, drain plugs, and water intake screens.

Fits 60 degree V4 outboards 1995 to present.
Uses two bolt bearing carrier.
Includes pinion bearing, drain plugs, and water intake screens.

Fits most 90 degree, 2.6 liter 2 stroke.
Fits most 4 cylinder 4 stroke, 150hp.
Includes pinion bearing, drain plugs and water intake screens.

Replaces seals in SEI's SE205 replacement lower unit

Gear Housing Seal Kit replaces OE# 26-43035A 4

Fits 75/80/90/100 EFI & 4-stroke

Replaces OE# 26-85090A1

Replaces OE# 26-85090A2

Gearcase Seal Kit. This gearcase seal kit fits Evinrude/ Johnson outboard lower units with the following applications: 4 - 8 HP 2 Stroke (1980-2005), and 5 - 6 HP 4 Stroke (1996-2004).

Replaces OE #26-79831A1 and #5000309
Fits Mercury Gearcase Seal 26-79831A1 and Fits OMC Gearcase Seal 5000309

Replaces OE# 26-41365A3