V-Drive Components - V-Drive Accessories

Used with our 1" Strut Bushing Install Tool to fit 1 1/8" bushings. Make easy work installing strut bushings.

Made from beautifully machined 6061-T6 aluminum. This piece mounts to the scoop to hold the other end of your standard 3/4" rope guard. Used in conjunction with our Top V-Drive Rope Guard Cap. There are 2x mounting holes for 1/4" bolts. Approx. size is 2 3/8" long, 1 1/4" tall and 7/8" wide.

Billet Aluminum Passenger Foot Pegs

Two beautifully machined 4" long foot pegs made from 6061-T6 aluminum. Mounts easily to your stinger with 2x 5/16" bolts. Included are 2x foot pegs, 2x mounting plates and 8x rubber o-rings. Ready to polish, anodized or powder coat to match your current rigging.

• Made from 6061-T6 Aluminum
• Machined Satin Finish
• 5" long and 1" wide. 
• Fits standard Casale V-drives
• Two machined spacers are extra long to fit the different styles of cases.
• You have to cut the spacers to fit your application. 
• Long 5/16" bolt not included.

Cavitation Plate Lockout

Safe, low profile 5 position lockout assembly. Fits standard ½” diameter cavitation rods. Made from 6061-T6 aluminum that can be easily polished or anodized to match your existing hardware. Each tab incorporates a built-in Teflon washer to avoid any metal to metal contact and a smooth operation. Four bolt aluminum safety collar is included. Approximate size is 3” x 3” x 3 5/16”. Secures to stringer using 2x 5/16” tapped holes.

This bolts to the engine side of the driveline tube. Fits standard 5" outside diameter tube. 7 1/2" housing o.d. 1 3/8" thick. 4x 3/8" diameter mounting bolt holes. O-Ring included for a tight fit. Made for 6061-T6 Aluminum.

Make easy work installing strut bushings. Slide your 1" strut bushing onto this tool and gently knock it into your strut. We do recommend to slightly chamfer one side of the strut bushing for a clean start.

Made from beautifully machined 6061-T6 aluminum that is approximately 11 3/4" long x 4 1/4" tall. Fits a standard 4 bolt pattern Casale v-drive. Clean one piece design that replaces the cast shift box cover. Check out our Air Shift Kit for 1 stop shopping.

Fits Casale V-Drive. Clean 1 piece air shift bracket that eliminates the stock shift box cast cover. Made from 6061-T6 Aluminum that can be easily polished or anodized to match your existing hardware. Kit comes with Air Shift Bracket, Shift Arm, 12V Solenoid 4way / 2 position 50-150psi valve, Bimba Air Cylinder, V-Drive Gasket and Shift Arm O-Ring. Only the best parts are used in this kit!!!

Made from beautifully machined 6061-T6 aluminum. This cap is vented and is a direct replacement for your cast top bearing cap. It features a 3/4" counter bored hole to fit your rope guard tubing. There is a 1/4" tapped hole in the side to lock your rope guard in place. 6 counter bored hole bolt pattern for a clean appearance.

Made from beautifully machined 6061-T6 aluminum. 6 hole bolt pattern. This bolts on the top rear of your v-drive that allows you to attach a driveshaft guard. Fits 5" inside diameter driveshaft guards or can be turned down to fit your application.

Standard V-Drive Mid-plate. Material is 6061-T6 aluminum. 3/8" or 1/2" thick versions. 28" wide. 12 3/4" tall. 2x tapped 5/16"-18 holes to secure rear case during assembly.

The Pro Whirlaway housing replaces your Whirlaway Spacer and Shift Box when running a clutch or transmission for a clean look while using standard whirlaway gears. Fits Casale V-Drives. Made from beautifully machined 6061-T6 aluminum that is approximately 5 3/4" long. Fits a standard 6 bolt pattern v-drive. Never forget to drop it in gear again!!!

100% Gloss black powder coated and laser engraved. 4" diameter Sketchy logo. Fits standard 2' receivers. Foam pad on backside to prevent rattling. No disappointments!!

Made from beautifully machined 6061-T6 aluminum. This cap is vented and is a direct replacement for your cast top bearing cap with a tach drive. 6 counter bored hole bolt pattern for smooth appearance.

Made from beautifully machined 6061-T6 aluminum. 6 hole bolt pattern plus one hole for shift box. Used to adapt a Whirlaway to your v-drive. The Whirlaway Housing bolts in-between the v-drive case and shift box.