Designed for top mounting in aluminum, plastic or stainless steel fuel tanks in all types of marine vessels. All stainless steel construction resists corrosion and is ethanol compliant. Meets and exceeds current NMMA and ABYC specifications. SS 1/4" NPT female thread with 3/8" barb. 1/4" ground spade terminal. Pre-bent 90 degree float arm.
How It Works
Measurement is done by series of reed switches positioned inside the level tube. A float with built in magnets then triggers the reed relays generating a potential - free resistance with an ohm value that increases or decreases. Resistance output is fully customizable. The float is the only moving part of the sensors, thereby minimizing potential mechanical failures. All sensors are fully insulated to protect against voltage inside the tank.
Suitable for Gas, Diesel and Water
316 Stainless Steel
SAE 5 Hole Pattern
Gasket Included
240-33 OHMS (240 ohm empty and 33 ohm full)
Constructed to meet and/or exceed all applicable
ISO, NMMA/ABYC and USCG standards
Optional threaded NPT Adapter for screw in applications
Sensors are fully insulated to protect against voltage inside the tank
Float is the only moving part of the sensor, minimizing mechanical failure
Sending unit length should be a minimum of one (1) inch less than the plastic tank depth, and three quarters (0.75) of an inch less than the metal tank depth. Note: If metal tank surface flexes, deduct one (1) inch from the depth.