Chrysler - V8 Big Block

Complete Barr Marine exhaust kit for the Chrysler Big Block V8 (log style). Everything listed below is included in this kit, so the complete exhaust setup can be ordered under one part number.

Kit includes:

• (2) CM-1-5972A Chrysler Big Block V8 Exhaust Manifold. Direct replacement water cooled manifold for big block Chrysler. Replaces Chrysler 3619695/E7081M, Osco 7081 and Mallory 9-40300.
• (2) CM-1-5972G-P Chrysler Big Block V8 Exhaust Manifold Mounting Kit. Manifold to cylinder head mounting kit (includes bolts, manifold to head gaskets and brass drain plug).
• (2) CM-20-9234 Chrysler Big Block V8 Lower Riser Elbow. Exhaust riser lower elbow. Direct replacement for Chrysler part # E9234M. Replaces Mallory 9-40314.
• (2) CM-20-9234P Chrysler Big Block V8 Lower Elbow Mounting Kit. Mounting kit for lower elbow riser (includes bolts, gasket and pipe plugs).
• (2) CM-20-4142411 Chrysler V8 Upper Riser Elbow. Exhaust riser/upper elbow. Direct replacement for Chrysler part #''s 3745639, 2847623, 2487404 and E9233M. Replaces Chrysler 2847405/2847623/3745639/E9233M, Osco 5639 and Mallory 9-40311.
• (2) CM-20-4142411P Chrysler V8 Upper Riser Mounting Kit. Mounting kit for upper riser/elbow (includes sleeve, O-rings, retainers, bolts and pipe plugs).

Fits Chrysler V8 361, 383, 400, 413, 426 and 440 C.I.D., all models 1959 and up (log style direct replacement).

Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.''s are achieved after replacing an OEM manifold with Barr replacement parts.

• 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).

Compatible parts:

• CM-20-1947617 exhaust elbow extension retainer.
• CM-20-9232 6" exhaust elbow high riser extension. Direct replacement for Chrysler part # E9232M.
• 1-0007 adaptor for rear end of manifold. Use with Barr style exhaust risers or elbow connectors.
• CM-1-5972B direct replacement front end plate.
• CM-1-5972C end plate gasket, (2) required per manifold.
• CM-1-5972D copper water distribution tube.
• CM-1-5972P manifold to cylinder head mounting gasket set.
• CM-1-5972SS-P manifold to cylinder head mounting kit (includes stainless steel studs and nuts, manifold to head gaskets and brass drain plugs).
• CM-20-9224 exhaust to elbow extension retainer sleeve.
• CM-20-9225 exhaust to elbow extension inner seal.
• CM-20-9226 exhaust to elbow extension outer seal.
• CM-20-9232P mounting kit for 6" extension (includes sleeve, O-rings, retainers and bolts).
• CM-50-6023040 stainless steel exhaust manifold stud.
• CM-1-6677A direct replacement water cooled manifold for model years 1973 to 1986.
• CM-20-2600402 exhaust riser lower elbow. Direct replacement for Chrysler part # 2600402.
• CM-20-2847405 90 degree exhaust elbow. Direct replacement for Chrysler part #''s 2847405 and 2469639.
• CM-20-6672 fully jacketed 20 degree exhaust elbow. Accepts 3" I.D. exhaust hose.
• CM-20-6674 fully jacketed exhaust riser. 6" riser protection. Direct replacement for Chrysler part # 2846689.
• CM-1-6672B front end plate without the water connector, (1) required per manifold (Chrysler part # 2846106). May require mounting kit # CM-1-6672B-P (shown on next page).
• CM-1-6672C adaptor for rear end of manifold. Use with Barr style exhaust risers or elbows, (1) required per manifold.
• CM-1-6672E copper water distribution tube, (1) required per manifold. Will fit both manifold styles.
• CM-1-6672H front end plate with 1/2" N.P.T. water connection. For use where water connection is made from the front of the manifold.
• CM-1-6677P manifold to cylinder head mounting kit (Order (1) of the appropriate mounting kits according to your requirements).
• CM-1-6677SS-P stainless steel manifold to cylinder head mounting kit (includes stainless studs, nuts, manifold to head gaskets and brass drain plugs).
• CM-20-6672P mounting kit for exhaust elbow connector for raw water cooled manifold (includes bolts, gasket and pipe plug).

Composite kit picture shown is for reference only. See list of included parts above in the description.

Complete Barr Marine exhaust kit for the Chrysler Big Block V8 (log style). Everything listed below is included in this kit, so the complete exhaust setup can be ordered under one part number.

Kit includes:

• (2) CM-1-5972A Chrysler Big Block V8 Exhaust Manifold. Direct replacement water cooled manifold for big block Chrysler. Replaces Chrysler 3619695/E7081M, Osco 7081 and Mallory 9-40300.
• (2) CM-1-5972SS-P Chrysler Big Block V8 Stainless Exhaust Manifold Mounting Kit. Manifold to cylinder head mounting kit (includes stainless steel studs and nuts, manifold to head gaskets and brass drain plugs).
• (2) CM-20-9234 Chrysler Big Block V8 Lower Riser Elbow. Exhaust riser lower elbow. Direct replacement for Chrysler part # E9234M. Replaces Mallory 9-40314.
• (2) CM-20-9234P Chrysler Big Block V8 Lower Elbow Mounting Kit. Mounting kit for lower elbow riser (includes bolts, gasket and pipe plugs).
• (2) CM-20-4142411 Chrysler V8 Upper Riser Elbow. Exhaust riser/upper elbow. Direct replacement for Chrysler part #''s 3745639, 2847623, 2487404 and E9233M. Replaces Chrysler 2847405/2847623/3745639/E9233M, Osco 5639 and Mallory 9-40311.
• (2) CM-20-4142411P Chrysler V8 Upper Riser Mounting Kit. Mounting kit for upper riser/elbow (includes sleeve, O-rings, retainers, bolts and pipe plugs).

Fits Chrysler V8 361, 383, 400, 413, 426 and 440 C.I.D., all models 1959 and up (log style direct replacement).

Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.''s are achieved after replacing an OEM manifold with Barr replacement parts.

• 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).

Compatible parts:

• CM-20-1947617 exhaust elbow extension retainer.
• CM-20-9232 6" exhaust elbow high riser extension. Direct replacement for Chrysler part # E9232M.
• 1-0007 adaptor for rear end of manifold. Use with Barr style exhaust risers or elbow connectors.
• CM-1-5972B direct replacement front end plate.
• CM-1-5972C end plate gasket, (2) required per manifold.
• CM-1-5972D copper water distribution tube.
• CM-1-5972G-P manifold to cylinder head mounting kit (includes bolts, manifold to head gaskets and brass drain plug).
• CM-1-5972P manifold to cylinder head mounting gasket set.
• CM-20-9224 exhaust to elbow extension retainer sleeve.
• CM-20-9225 exhaust to elbow extension inner seal.
• CM-20-9226 exhaust to elbow extension outer seal.
• CM-20-9232P mounting kit for 6" extension (includes sleeve, O-rings, retainers and bolts).
• CM-50-6023040 stainless steel exhaust manifold stud.
• CM-1-6677A direct replacement water cooled manifold for model years 1973 to 1986.
• CM-20-2600402 exhaust riser lower elbow. Direct replacement for Chrysler part # 2600402.
• CM-20-2847405 90 degree exhaust elbow. Direct replacement for Chrysler part #''s 2847405 and 2469639.
• CM-20-6672 fully jacketed 20 degree exhaust elbow. Accepts 3" I.D. exhaust hose.
• CM-20-6674 fully jacketed exhaust riser. 6" riser protection. Direct replacement for Chrysler part # 2846689.
• CM-1-6672B front end plate without the water connector, (1) required per manifold (Chrysler part # 2846106). May require mounting kit # CM-1-6672B-P (shown on next page).
• CM-1-6672C adaptor for rear end of manifold. Use with Barr style exhaust risers or elbows, (1) required per manifold.
• CM-1-6672E copper water distribution tube, (1) required per manifold. Will fit both manifold styles.
• CM-1-6672H front end plate with 1/2" N.P.T. water connection. For use where water connection is made from the front of the manifold.
• CM-1-6677P manifold to cylinder head mounting kit (Order (1) of the appropriate mounting kits according to your requirements).
• CM-1-6677SS-P stainless steel manifold to cylinder head mounting kit (includes stainless studs, nuts, manifold to head gaskets and brass drain plugs).
• CM-20-6672P mounting kit for exhaust elbow connector for raw water cooled manifold (includes bolts, gasket and pipe plug).

Composite kit picture shown is for reference only. See list of included parts above in the description.

Complete Barr Marine exhaust kit for the Chrysler Big Block V8 (log style). Everything listed below is included in this kit, so the complete exhaust setup can be ordered under one part number.

Kit includes:

• (2) CM-1-5972A Chrysler Big Block V8 Exhaust Manifold. Direct replacement water cooled manifold for big block Chrysler. Replaces Chrysler 3619695/E7081M, Osco 7081 and Mallory 9-40300.
• (2) CM-1-5972G-P Chrysler Big Block V8 Exhaust Manifold Mounting Kit. Manifold to cylinder head mounting kit (includes bolts, manifold to head gaskets and brass drain plug).
• (2) CM-20-9234 Chrysler Big Block V8 Lower Riser Elbow. Exhaust riser lower elbow. Direct replacement for Chrysler part # E9234M. Replaces Mallory 9-40314.
• (2) CM-20-9234P Chrysler Big Block V8 Lower Elbow Mounting Kit. Mounting kit for lower elbow riser (includes bolts, gasket and pipe plugs).
• (2) CM-20-9232 Chrysler V8 High Riser Elbow Extension 6 Inch. 6" exhaust elbow high riser extension. Direct replacement for Chrysler part # E9232M. Replaces Chrysler E9232M.
• (2) CM-20-9232P Chrysler V8 6 Inch Extension Mounting Kit. Mounting kit for 6" extension (includes sleeve, O-rings, retainers and bolts). Replaces Osco 7087-MK.
• (2) CM-20-4142411 Chrysler V8 Upper Riser Elbow. Exhaust riser/upper elbow. Direct replacement for Chrysler part #''s 3745639, 2847623, 2487404 and E9233M. Replaces Chrysler 2847405/2847623/3745639/E9233M, Osco 5639 and Mallory 9-40311.
• (2) CM-20-4142411P Chrysler V8 Upper Riser Mounting Kit. Mounting kit for upper riser/elbow (includes sleeve, O-rings, retainers, bolts and pipe plugs).

Fits Chrysler V8 361, 383, 400, 413, 426 and 440 C.I.D., all models 1959 and up (log style direct replacement).

Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.''s are achieved after replacing an OEM manifold with Barr replacement parts.

• 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).

Compatible parts:

• CM-20-1947617 exhaust elbow extension retainer.
• 1-0007 adaptor for rear end of manifold. Use with Barr style exhaust risers or elbow connectors.
• CM-1-5972B direct replacement front end plate.
• CM-1-5972C end plate gasket, (2) required per manifold.
• CM-1-5972D copper water distribution tube.
• CM-1-5972P manifold to cylinder head mounting gasket set.
• CM-1-5972SS-P manifold to cylinder head mounting kit (includes stainless steel studs and nuts, manifold to head gaskets and brass drain plugs).
• CM-20-9224 exhaust to elbow extension retainer sleeve.
• CM-20-9225 exhaust to elbow extension inner seal.
• CM-20-9226 exhaust to elbow extension outer seal.
• CM-50-6023040 stainless steel exhaust manifold stud.
• CM-1-6677A direct replacement water cooled manifold for model years 1973 to 1986.
• CM-20-2600402 exhaust riser lower elbow. Direct replacement for Chrysler part # 2600402.
• CM-20-2847405 90 degree exhaust elbow. Direct replacement for Chrysler part #''s 2847405 and 2469639.
• CM-20-6672 fully jacketed 20 degree exhaust elbow. Accepts 3" I.D. exhaust hose.
• CM-20-6674 fully jacketed exhaust riser. 6" riser protection. Direct replacement for Chrysler part # 2846689.
• CM-1-6672B front end plate without the water connector, (1) required per manifold (Chrysler part # 2846106). May require mounting kit # CM-1-6672B-P (shown on next page).
• CM-1-6672C adaptor for rear end of manifold. Use with Barr style exhaust risers or elbows, (1) required per manifold.
• CM-1-6672E copper water distribution tube, (1) required per manifold. Will fit both manifold styles.
• CM-1-6672H front end plate with 1/2" N.P.T. water connection. For use where water connection is made from the front of the manifold.
• CM-1-6677P manifold to cylinder head mounting kit (Order (1) of the appropriate mounting kits according to your requirements).
• CM-1-6677SS-P stainless steel manifold to cylinder head mounting kit (includes stainless studs, nuts, manifold to head gaskets and brass drain plugs).
• CM-20-6672P mounting kit for exhaust elbow connector for raw water cooled manifold (includes bolts, gasket and pipe plug).

Composite kit picture shown is for reference only. See list of included parts above in the description.

Complete Barr Marine exhaust kit for the Chrysler Big Block V8 (log style). Everything listed below is included in this kit, so the complete exhaust setup can be ordered under one part number.

Kit includes:

• (2) CM-1-5972A Chrysler Big Block V8 Exhaust Manifold. Direct replacement water cooled manifold for big block Chrysler. Replaces Chrysler 3619695/E7081M, Osco 7081 and Mallory 9-40300.
• (2) CM-1-5972SS-P Chrysler Big Block V8 Stainless Exhaust Manifold Mounting Kit. Manifold to cylinder head mounting kit (includes stainless steel studs and nuts, manifold to head gaskets and brass drain plugs).
• (2) CM-20-9234 Chrysler Big Block V8 Lower Riser Elbow. Exhaust riser lower elbow. Direct replacement for Chrysler part # E9234M. Replaces Mallory 9-40314.
• (2) CM-20-9234P Chrysler Big Block V8 Lower Elbow Mounting Kit. Mounting kit for lower elbow riser (includes bolts, gasket and pipe plugs).
• (2) CM-20-9232 Chrysler V8 High Riser Elbow Extension 6 Inch. 6" exhaust elbow high riser extension. Direct replacement for Chrysler part # E9232M. Replaces Chrysler E9232M.
• (2) CM-20-9232P Chrysler V8 6 Inch Extension Mounting Kit. Mounting kit for 6" extension (includes sleeve, O-rings, retainers and bolts). Replaces Osco 7087-MK.
• (2) CM-20-4142411 Chrysler V8 Upper Riser Elbow. Exhaust riser/upper elbow. Direct replacement for Chrysler part #''s 3745639, 2847623, 2487404 and E9233M. Replaces Chrysler 2847405/2847623/3745639/E9233M, Osco 5639 and Mallory 9-40311.
• (2) CM-20-4142411P Chrysler V8 Upper Riser Mounting Kit. Mounting kit for upper riser/elbow (includes sleeve, O-rings, retainers, bolts and pipe plugs).

Fits Chrysler V8 361, 383, 400, 413, 426 and 440 C.I.D., all models 1959 and up (log style direct replacement).

Barr Marine castings have a thicker interior wall, are painted to match original manufacturer colors and are packed in foam for added protection during shipping and storage. Barr manifolds and exhaust connectors are designed to minimize back pressure, and in many cases more r.p.m.''s are achieved after replacing an OEM manifold with Barr replacement parts.

• 3 year limited warranty on Barr exhaust manifolds, risers and exhaust connectors (1 year when used for commercial purposes).

Compatible parts:

• CM-20-1947617 exhaust elbow extension retainer.
• 1-0007 adaptor for rear end of manifold. Use with Barr style exhaust risers or elbow connectors.
• CM-1-5972B direct replacement front end plate.
• CM-1-5972C end plate gasket, (2) required per manifold.
• CM-1-5972D copper water distribution tube.
• CM-1-5972G-P manifold to cylinder head mounting kit (includes bolts, manifold to head gaskets and brass drain plug).
• CM-1-5972P manifold to cylinder head mounting gasket set.
• CM-20-9224 exhaust to elbow extension retainer sleeve.
• CM-20-9225 exhaust to elbow extension inner seal.
• CM-20-9226 exhaust to elbow extension outer seal.
• CM-50-6023040 stainless steel exhaust manifold stud.
• CM-1-6677A direct replacement water cooled manifold for model years 1973 to 1986.
• CM-20-2600402 exhaust riser lower elbow. Direct replacement for Chrysler part # 2600402.
• CM-20-2847405 90 degree exhaust elbow. Direct replacement for Chrysler part #''s 2847405 and 2469639.
• CM-20-6672 fully jacketed 20 degree exhaust elbow. Accepts 3" I.D. exhaust hose.
• CM-20-6674 fully jacketed exhaust riser. 6" riser protection. Direct replacement for Chrysler part # 2846689.
• CM-1-6672B front end plate without the water connector, (1) required per manifold (Chrysler part # 2846106). May require mounting kit # CM-1-6672B-P (shown on next page).
• CM-1-6672C adaptor for rear end of manifold. Use with Barr style exhaust risers or elbows, (1) required per manifold.
• CM-1-6672E copper water distribution tube, (1) required per manifold. Will fit both manifold styles.
• CM-1-6672H front end plate with 1/2" N.P.T. water connection. For use where water connection is made from the front of the manifold.
• CM-1-6677P manifold to cylinder head mounting kit (Order (1) of the appropriate mounting kits according to your requirements).
• CM-1-6677SS-P stainless steel manifold to cylinder head mounting kit (includes stainless studs, nuts, manifold to head gaskets and brass drain plugs).
• CM-20-6672P mounting kit for exhaust elbow connector for raw water cooled manifold (includes bolts, gasket and pipe plug).

Composite kit picture shown is for reference only. See list of included parts above in the description.