Identifying the function of each push button switch is simple with the interchangeable 3M adhesive backed actuator PU Dome Backlit Labels. These labels are used when using translucent actuator buttons that allows the LEDs in the switch body to pass light through the label. The result is excellent visibility at night. There are over 100 Switch Function Icons to choose from.
Features & Benefits:
Over 100 Interchangeable 3M Adhesive Backed PU Dome Backlit Function Icon Labels to choose from.
Identifying the function of each push button switch is simple with the interchangeable 3M adhesive backed actuator PU Dome Backlit Labels. These labels are used when using translucent actuator buttons that allows the LEDs in the switch body to pass light through the label. The result is excellent visibility at night. There are over 100 Switch Function Icons to choose from.
Features & Benefits:
Over 100 Interchangeable 3M Adhesive Backed PU Dome Backlit Function Icon Labels to choose from.
Finally a Sea Water Pump designed to last a life time. Hardin Marine has taken their years of sea water pump manufacturing experience and designed an all new stainless steel water pump to replace the factory pot metal and plastic style pumps used on original equipment applications.
These pumps are cast from 316L high quality stainless steel and each pump uses a double roller bearing style snout assembly while integrating a one piece rear impeller housing. These housings will not crack and erode like the factory style units. A factory style press on pump mandrel can be used to accommodate most pulleys. A unique feature to this pump is that the rear housing has 1"npt female inlet/outlet ports so that a wide range of fittings and hose connections can be used for ease of installation.
If your looking for what could possible be the last sea water pump you ever buy look no further as this is the finest direct replacement sea pump on the market today.
Replaces a sierra #18-3600 and Mercruiser 46-72774A32, 46-807151A9, 46-72774A86, and 46-807151A12. Also replaces two-piece raw water pump. Fits most Bravo, TR, TRS applications
Hardin Marine has taken their years of sea water pump manufacturing experience and blended their Extreme Series Sea Pump with an OEM style housing. These snout assembly on these pumps are cast from 316L high quality stainless steel and each pump uses a double roller bearing style snout assembly while integrating a one piece OEM plastic rear impeller housing. Replaces two-piece raw water pump. Fits most Bravo, TR, TRS applications
This pump is the enhanced duty unit using a OEM style plastic impeller housing and impeller. The pumps are assembled and tested right here in the USA and are the best money can buy. These pumps include a vent equalizer that allows venting of pressure build up inside the Sea Pump housing that could create premature failure to be released through the existing fuel pump vent system. The pumps are assembled and tested right here in the USA and are the best money can buy.
Enhanced Duty Version includes vent equalizer system.
Perfect for users looking for an upgrade on the stock pump design.
For Extreme Heavy Duty applications use 625-4118 instead.
Hardin Marine has once again used their racing support and heritage to develop a superior sea pump replacement option for the Mercruiser generation 5/6 application that requires the mechanical fuel pump mounting provision. This pump uses a 316L heat treated Stainless steel snout with a 17-4 hardened pump shaft and high speed roller bearings to provide the ultimate sea pump foundation for years of service. This pump is available in two (2) versions one which is the standard duty unit using a OEM style plastic impeller housing and impeller and a superduty version that employs Hardin's all stainless steel "Life Time" impeller housing with OEM Mercuiser impeller. These new pumps include a vent equalizer that allows venting of pressure build up inside the Sea Pump housing that could create premature failure to be released through the existing fuel pump vent system. The pumps are assembled and tested right here in the USA and are the best money can buy.
Heavy Duty "Extreme" Version
Extreme Series Stainless Steel Housing
Hardin Stainless Steel Snout
17-4 Hardened Pump Shaft
High Speed Roller Bearings
Accepts OEM Factory Pulley
Includes #625-4221 Vent Equalizer in kit.
Replaces Mercruiser #'s 46-807151A8, 46-8m0084270, 46-807151A31, and 72774A82
Expansive kit to replace water impeller, upper and lower housings, face plate, gaskets and o-rings.
For select Mercury DFI outboards.
One of the most complete kits available to repair outboard and stern drive water pumps. See your owner's manual or service manual for specific applications and replacement instructions.
Produced by Mercury Marine to our stringent original equipment manufacturer specifications to maximize the performance of your Mercury and Mariner outboard or MerCruiser stern drive
Water pump repair kit 817275A5 is for Mercury 3.0L DFI outboards. The kit includes water impeller, pump housing, face plate, gaskets and o-rings. See your owner's manual or service manual for specific applications and replacement instructions.
Your Price:
$86.49
This Part has options, please click the button below to order.
Acts as a check valve to keep following seas/water from washing back through exhaust to engine when engine is not running or at low RPM.
Shutter is 2.48" diameter at cross pin (hinge pin).
Easy to install with common shop tools.
See your owner's manual or service manual for specific applications and replacement instructions.
Produced by Mercury Marine to our stringent original equipment manufacturer specifications to maximize the performance of your Mercury and Mariner outboard or MerCruiser stern drive
e manifold. For freshwater installations.
Your Price:
$599.99
This Part has options, please click the button below to order.
BBC Gen 4 Stainless Steel Pump And Bracket Mercury Sea Pump Assembly V-Belt
These are new Stainless Steel replacement sea pumps. We have configured options so that you may buy just a replacement pump only or bracket only or even an entire replacement pump assembly including the mounting bracket, V-groove pulley and mandrel. This model include a beautifully polished billet bracket and V-Belt Pulley and Mandrel.
NOTE: Billet bracket cannot be used in Circ Pump applications!
