The Gravity LED Deck Lights feature a machined aluminum housing are surface mounted to the substrate. No need to core a hole. Just run your wire, connect, and fasten to the fiberglass roof or wall of your boat. This unique aspect of the Gravity LED lights makes it a favorite for boat builders.

With the housing being the same for each model, we give you the option to pick and choose which faceplate you would like such as Dome, Surface Mounted, Flush Mount, and Eyelid. Each faceplate is available in stainless steel, white, and black housing as well as the LED colors are blue, green, red, cool white, warm white, and RGB.

• Input: DC12V~DC24V
• Power: 1.2WAmp
• Draw: 0.2A @ 12VDC
• Lamp type: 1PC x 1W OSRAM LED
• Temperature Color: RGB (Red, Green, Blue)
• Beam Angle: 120 Degrees
• IP Rating: IP67
• Power Wire: 9ft of Copper Tinned 4 Conductor Wire, Black Insulated Jacket
• Warranty: Lifetime 
• RGB Controller is Sold Separately.

Light up the night, or at least your drink with these lighted beverage holders! Easy to wire to show 7 colors, Red, Green, Blue, Yellow, Cyan, Magenta or White

• Fits: cans, bottles and kuzis
• EASY  wiring - Black to Positive, Color wire(s) to Ground.
• Heavy Duty corrosion resistant Stainless Steel Housing and Rim
• Light shines outside of rim
• 1/4” drain fitting
• 12” harness to hook up to boats electrical system
• 3-1/2" cutout, 4-1/2" overall width, 3" depth

Waterproof LED Channel is a Linear LED light bar fixtures that is a very versatile solution for a variety of lighting needs. This includes under gunnel lighting for boats, hatch lighting, cutting board work areas, tool box lighting, cabinet lighting, under-cabinet lighting, desk lighting, bookshelf lighting, showcase lighting, truck bed lighting, RV ceiling lights, and many more.

Aluminum channels are a crucial part of any linear LED fixture. They act as a durable, lightweight housing for LED strip lighting of any color temperature, color, or output. Most importantly they act as the primary source of thermal management for your LED strips.

This 3/4" wide aluminum LED light bar emits up to 710 lumens per foot and is available in many color options as well as RGB, dual-color, and custom OEM designs. This waterproof light fixture has 12 VDC operation and is equipped with a 3 ft black insulated power wire on one end and mounting tabs on both ends for easy installation.  Mounting hardware sold separately.

Great for: Boats, Docks, Outdoor Bars & Patios, Bathrooms, Kitchens, Swimming Areas, Steps, Coves, Under Cabinets, Side by Sides, Work Trucks, Tool Boxes, Truck Beds, Amp Steps.

Dimensions: 3/4" WIDE (18mm)  x  1/2" TALL (12mm)  x  LENGTH ORDERED

Specifications:

• IP68 Waterproof
• Fully Potted - UV Rated
• 9ft. Black Insulated Power Cord Included 
• 12 Volts DC Input 
• Amp Draw: 0.275A / per foot @ 12V
• High Quality / High Output LED's - Will Not Go Out Premature (Like Others)
• RGB Multi Color Light
  
• 30,000 Hours Expected Lifetime
• Extremely Durable
• Mounting Tab on Each End
• PlashLights Full Lifetime Warranty

*NOTE - Over voltage will permanently damage the light strip (15+ V)

* It is recommended to secure (fasten or embed in silicone) the center of the longer aluminum channels to prevent movement.

Waterproof LED Channel is a Linear LED light bar fixtures that is a very versatile solution for a variety of lighting needs. This includes under gunnel lighting for boats, hatch lighting, cutting board work areas, tool box lighting, cabinet lighting, under-cabinet lighting, desk lighting, bookshelf lighting, showcase lighting, truck bed lighting, RV ceiling lights, and many more.

Aluminum channels are a crucial part of any linear LED fixture. They act as a durable, lightweight housing for LED strip lighting of any color temperature, color, or output. Most importantly they act as the primary source of thermal management for your LED strips.

This 3/4" wide aluminum LED light bar emits up to 710 lumens per foot and is available in many color options as well as RGB, dual-color, and custom OEM designs. This waterproof light fixture has 12 VDC operation and is equipped with a 3 ft black insulated power wire on one end and mounting tabs on both ends for easy installation.  Mounting hardware sold separately.

Great for: Boats, Docks, Outdoor Bars & Patios, Bathrooms, Kitchens, Swimming Areas, Steps, Coves, Under Cabinets, Side by Sides, Work Trucks, Tool Boxes, Truck Beds, Amp Steps.

Dimensions: 3/4" WIDE (18mm)  x  1/2" TALL (12mm)  x  LENGTH ORDERED

Specifications:

• IP68 Waterproof
• Fully Potted - UV Rated
• 9ft. Black Insulated Power Cord Included 
• 12 Volts DC Input 
• Amp Draw: 0.275A / per foot @ 12V
• High Quality / High Output LED's - Will Not Go Out Premature (Like Others)
• RGBW Multi Color Light
  
• 30,000 Hours Expected Lifetime
• Extremely Durable
• Mounting Tab on Each End
• PlashLights Full Lifetime Warranty

*NOTE - Over voltage will permanently damage the light strip (15+ V)

* It is recommended to secure (fasten or embed in silicone) the center of the longer aluminum channels to prevent movement.

FEATURES:

• Rated for 10A
• Black Anodized Aluminum Housing
• Simply wire according to an RGB Controller for your choice of color options such as color changing Fade, Flash/Strobe, or a single color such as hot pink or teal.
• 22mm (7/8") Diameter Button - Easier to Push Compared to 19mm
• 25mm (1") Outside Diameter
• Works on 12V Systems
• LED Backlit Ring in your Choice of Colors
• IP67 Rated - Waterproof
• Silky Smooth Movement
• Rated for 150,000 Cycles (Presses)
• Removable Clip for Wiring Harness
• 3ft of Wiring for a Simple Installation
• Mounts in panels up to 3/8" thick
• Fits a 7/8" Hole
• Plash Limited Lifetime Warranty
• Momentary switch is no longer available, only latching switch available 

WIRING:

This push button switch has two functions:

A) Illuminating the LED Ring

B) Controlling the Equipment that it is Connected to (such as a bilge pump or light bar).

A) LED Illuminated Ring on the Switch:

The below 4 wires connect to the RGB Controller --> **Sold Separately

• BLACK 18 AWG Wire = Positive V+ (connects to RGB controller)
• RED 18 AWG Wire = Ground (connects to RGB controller)
• BLUE 18 AWG Wire = Ground (connects to RGB controller)
• GREEN 18 AWG Wire = Ground (connects to RGB controller)

• RED 14 AWG Wire = Positive V+  IN from Fuse Panel (verify the fuse is correctly sized for your load)
• BROWN 14 AWG Wire = Positive V+ OUT to Load (example: connects to bilge pump)

FEATURES:

• Rated for 10A
• Stainless Steel Housing - No Rust
• Simply wire according to an RGB Controller for your choice of color options such as color changing Fade, Flash/Strobe, or a single color such as hot pink or teal.
• 22mm (7/8") Diameter Button - Easier to Push Compared to 19mm
• 25mm (1") Outside Diameter
• Works on 12V Systems
• LED Backlit Ring in your Choice of Colors
• IP67 Rated - Waterproof
• Silky Smooth Movement
• Rated for 150,000 Cycles (Presses)
• Removable Clip for Wiring Harness
• 3ft of Wiring for a Simple Installation
• Mounts in panels up to 3/8" thick
• Fits a 7/8" Hole
• Plash Limited Lifetime Warranty

WIRING:

This push button switch has two functions:

A) Illuminating the LED Ring

B) Controlling the Equipment that it is Connected to (such as a bilge pump or light bar).

A) LED Illuminated Ring on the Switch:

The below 4 wires connect to the RGB Controller --> **Sold Separately

• BLACK 18 AWG Wire = Positive V+ (connects to RGB controller)
• RED 18 AWG Wire = Ground (connects to RGB controller)
• BLUE 18 AWG Wire = Ground (connects to RGB controller)
• GREEN 18 AWG Wire = Ground (connects to RGB controller)

• RED 14 AWG Wire = Positive V+  IN from Fuse Panel (verify the fuse is correctly sized for your load)
• BROWN 14 AWG Wire = Positive V+ OUT to Load (example: connects to bilge pump)

FEATURES:

Our high intensity LED surface mounted transom lighting is of the utmost quality and mounts virtually anywhere you want on the transom with just a small 3/16" hole required. Each light is built with a 60" wire tail and will include our PlashLights RGB Bluetooth controller to provide endless color options, patterns, etc. These are a custom build product and can be made in different sizes and colors. No other light manufacturer produces such a great output for underwater lighting for as reasonable price. When you hold this light you will understand the quality by the weight of the 316 stainless steel housing, but more importantly when you turn this light on you will see the quality by the light output.

• Night activities
• Swimming
• Safety for loading and unloading at night
• Great for attracting fish on your evening trips
• Easily be seen out on the water
• Extreme intensity for showing off anytime of the day
• An easy way to help your sight when loading / unloading on lifts in the dark

What a simple way to turn heads at the dock. You will be the talk of the marina or the boat ramp.

Specifications

• 23,100 Lm per light / 46,200Lm Total (each color varies)
• 30° Emitting Angle
• Only a 3/16” Hole Required for Power Wire (Surface Mounted Light)
• Input Voltage: DC 12V (9V to 15V Max.)
• Current Draw: 11.2A @ 13.5VDC / 22.4A @ 13.5VDC for the pair
• 50,000+ Hour Life
• 316 Stainless Steel Housing (Polished)
• 6.87" Long x 3.15" Tall x 0.88 Deep
• 6.54" Mounting screw center to center
• Factory Sealed Housing - IP68 Rated
• Lifetime Warranty 
• Underwater Use Only 
• Includes: 2 x lights (PL-UWL-180RGB), 1 x RGB Controller, 20ft x  18-4 power wire

Our high intensity LED surface mounted transom lighting is of the utmost quality and mounts virtually anywhere you want on the transom with just a small 3/16" hole required. Each light is built with a 60" wire tail and must utilize an RGB controller (included) to provide the ability to change colors, patterns, etc.  These are a custom build product and can be made in different sizes and colors. No other light manufacturer produces such a great output for underwater lighting for as reasonable price. When you hold this light you will understand the quality by the weight of the 316 stainless steel housing, but more importantly when you turn this light on you will see the quality by the light output.

Easy way to add some safety for:

• Night activities
• Swimming
• Safety for loading and unloading at night
• Great for attracting fish on your evening trips
• Easily be seen out on the water
• Extreme intensity for showing off anytime of the day
• An easy way to help your sight when loading / unloading on lifts in the dark

What a simple way to turn heads at the dock. You will be the talk of the marina or the boat ramp.

Specifications:

• 14,100 Lumens MAX (each color varies)
• 160° Emitting Angle
• Only a 3/16” Hole Required for Power Wire (Surface Mounted Light)
• Input Voltage: DC 12V (9V to 24V Max.)
• Current Draw: 3.1A @ 12.9VDC
• 50,000+ Hour Life
• 316 Stainless Steel Housing (Polished)
• 8.5" Long x 1.75" Tall x 0.5" Deep
• Factory Sealed Housing - IP68 Rated
• Lifetime Warranty 
• Underwater Use Only 

All RGB or RGBW lights need to have a controller in order to be able to change the light colors.  It is possible that one controller can operate many lights on the boat if they are RGB including speakers rings and accent lights, but that is dependent on the amp draw of said lights. Please contact us with questions.