Stainless Steel Oil Filter Bypass Eliminator - BBC Gen 4 and SBC

This strong stainless steel mount does not have a bypass so it eliminates the possibility of unfiltered oil entering the engine while replacing the weak and often failed factory unit.

When a marine engine is installed in the bilge of a boat there is little or no access to the bottom of the engine therefore a remote mounted oil filter is required.  An oil filter block off adapter must be bolted on the original oil filter location to accomplish this.  These block off adapters are constructed of stainless steel.  They are completely O-ringed on the sealing surfaces to eliminate oil leaks, copper sealing washers are NOT used under the mounting bolt heads.

13 Plate Cast Oil Cooler Cover, Port Side for KE or Mercury Flywheel Housing

These oil cooler covers are required for use when a plate style oil cooler is used with a Mercury Racing flywheel housing.  We offer multiple styles in both cast 356-T6 aluminum or 6061-T6 billet aluminum.  Each cover is hard anodized for corrosion resistance.

All of our bravo box style coolers an d remote style boxed coolers use a replacement gasket part #625-8017

Oil Cooler Cover - 8 Plate Cast Aluminum (356-T6) Oil Cooler Cover, Starboard Side For KE or Mercury Flywheel Housing

These oil cooler covers are required for use when a plate style oil cooler is used with a Mercury Racing flywheel housing. Each cover is hard anodized for corrosion resistance.

All of our bravo box style coolers an d remote style boxed coolers use a replacement gasket part #625-8018

Oil Cooler Cover - 13 Plate Cast Aluminum Oil Cooler Cover, Starboard Side For KE or Mercury Flywheel Housing

These oil cooler covers are required for use when a plate style oil cooler is used with a Mercury Racing flywheel housing. Each cover is hard anodized for corrosion resistance.

All of our bravo box style coolers an d remote style boxed coolers use a replacement gasket part #625-8018

13 Plate Stainless Steel Oil Cooler With Cast Aluminum Mercury Style Cover Kit (Port)

Once again these kits are designed for your ordering convenience. Each kit consists of a single oil cooler, cover plate (choice of stainless or billet aluminum), billet jam nuts, bolts and gaskets.

All of our bravo box style coolers an d remote style boxed coolers use a replacement gasket part #625-8017

8 Plate Stainless Steel Starboard Oil Cooler With Cast Aluminum Mercury Style Cover Kit

Once again these kits are designed for your ordering convenience. Each kit consists of a single oil cooler, cover plate (choice of stainless or billet aluminum), billet jam nuts, bolts and gaskets. 8 Plate Cooler rated up to 900 HP.

All of our bravo box style coolers an d remote style boxed coolers use a replacement gasket part #625-8018

13 Plate Stainless Steel Oil Cooler With Cast Aluminum Mercury Style Cover Kit (Starboard)

Once again these kits are designed for your ordering convenience. Each kit consists of a single oil cooler, Cast aluminum oil cooler cover plate, billet jam nuts, bolts and gasket.

All of our bravo box style coolers an d remote style boxed coolers use a replacement gasket part #625-8018

15 Plate Stainless Steel Oil Cooler with Billet Aluminum Mercury Style Cover (Port)

These oil coolers, covers, and kits are required for use when a plate style oil cooler is used with a Hardin Marine or Mercury Racing flywheel housing. We offer multiple styles in both cast 356-T6 aluminum or 6061-T6 billet aluminum. Each cover is hard anodized for corrosion resistance.

Once again these kits are designed for your ordering convenience. Each kit consists of a single oil cooler over plate, choice of stainless steel oil cooler, billet jam nuts, bolts and gaskets.

All of our bravo box style coolers an d remote style boxed coolers use a replacement gasket part #625-8017

15 Plate Billet Oil Cooler Cover, Port Side For KE or Mercury Flywheel Housing

These oil cooler covers are required for use when a plate style oil cooler is used with a Hardin Marine or Mercury Racing flywheel housing. We offer multiple styles in both cast 356-T6 aluminum or 6061-T6 billet aluminum. Each cover is hard anodized for corrosion resistance.

All of our bravo box style coolers an d remote style boxed coolers use a replacement gasket part #625-8017

8 Plate Cast Oil Cooler Cover, Port Side for KE or Mercury Flywheel Housing

These oil cooler covers are required for use when a plate style oil cooler is used with a Mercury Racing flywheel housing.  We offer multiple styles in both cast 356-T6 aluminum or 6061-T6 billet aluminum.  Each cover is hard anodized for corrosion resistance.

All of our bravo box style coolers an d remote style boxed coolers use a replacement gasket part #625-8017