FEATURES:

• Rated for 20A
• Black Anodized Aluminum Housing
  
• Simply remove the switch and rotate it 180° to change from "LED Always On" to "LED On When Pressed."
• 22mm (7/8") Diameter Button - Easier to Push Compared to 19mm
• 25mm (1") Outside Diameter
• Works on 12V or 24V Systems
• LED Backlit Ring in your Choice of Colors
• IP67 Rated - Waterproof
• Silky Smooth Movement
• Rated for 150,000 Cycles (Presses)
• Removable Clip for Wiring Harness
• 3ft of 14AWG Wiring for a Simple Installation
• Mounts in panels up to 3/8" thick
• Fits a 7/8" Hole
• Plash Limited Lifetime Warranty

WIRING:

• BLACK wire = Ground   
• RED wire = Positive V+
• BLUE wire = Ground
• BROWN wire = Positive V+ 

 There are many options when it comes to wiring configuration such as do you want the LED ring to be on all the time, only when the navigation lights are on, or only when the switch is pressed?  Depending on how you wire the switch, and the orientation of the switch, you can decide which function suits you best.

FEATURES:

• Rated for 10A
• Black Anodized Aluminum Housing 
• Simply wire according to the instructions for your choice of color options for both when latched and unlatched. Example: Blue turns to Teal (or pink) when pressed.
• 22mm (7/8") Diameter Button - Easier to Push Compared to 19mm
• 25mm (1") Outside Diameter
• Works on 12V or 24V Systems
• LED Backlit Ring in your Choice of Colors
• IP67 Rated - Waterproof
• Silky Smooth Movement
• Rated for 150,000 Cycles (Presses)
• Removable Clip for Wiring Harness
• 3ft of 14AWG Wiring for a Simple Installation
• Mounts in panels up to 3/8" thick
• Fits a 7/8" Hole
• Plash Limited Lifetime Warranty

WIRING:

• BROWN 14 AWG wire = Positive V+ Out to Load   
• RED 14 AWG wire = Positive V+ From Fuse Panel
• BLACK 18 AWG wire =  Ground
• BLUE 18 AWG wire = Positive V+
• RED 18 AWG wire = Postive V+
• GREEN18 AWG wire = Positive V+

 There are many options when it comes to wiring configuration such as do you want the LED ring to be on all the time, only when the navigation lights are on, or only when the switch is pressed?  Depending on how you wire the switch, and the orientation of the switch, you can decide which function suits you best.

FEATURES:

• Rated for 10A
• Black Anodized Aluminum Housing
• Simply wire according to an RGB Controller for your choice of color options such as color changing Fade, Flash/Strobe, or a single color such as hot pink or teal.
• 22mm (7/8") Diameter Button - Easier to Push Compared to 19mm
• 25mm (1") Outside Diameter
• Works on 12V Systems
• LED Backlit Ring in your Choice of Colors
• IP67 Rated - Waterproof
• Silky Smooth Movement
• Rated for 150,000 Cycles (Presses)
• Removable Clip for Wiring Harness
• 3ft of Wiring for a Simple Installation
• Mounts in panels up to 3/8" thick
• Fits a 7/8" Hole
• Plash Limited Lifetime Warranty

WIRING:

This push button switch has two functions:

A) Illuminating the LED Ring

B) Controlling the Equipment that it is Connected to (such as a bilge pump or light bar).

A) LED Illuminated Ring on the Switch:

The below 4 wires connect to the RGB Controller --> **Sold Separately

• BLACK 18 AWG Wire = Positive V+ (connects to RGB controller)
• RED 18 AWG Wire = Ground (connects to RGB controller)
• BLUE 18 AWG Wire = Ground (connects to RGB controller)
• GREEN 18 AWG Wire = Ground (connects to RGB controller)

• RED 14 AWG Wire = Positive V+  IN from Fuse Panel (verify the fuse is correctly sized for your load)
• BROWN 14 AWG Wire = Positive V+ OUT to Load (example: connects to bilge pump)

 FEATURES

• Stainless Steel Housing - No Rust
• Rated for 15A
• 22mm (7/8") Diameter Button - Easier to Push Compared to 19mm
• 25mm (1") Outside Diameter
• LED Backlit Ring in your Choice of Colors
• IP67 Rated - Waterproof
• Silky Smooth Movement
• Rated for 500,000 Cycles
• Removable Clip for Wiring Harness
• 3ft of 14AWG Copper Tinned Wiring for a Simple Installation
• Fits a 7/8" Hole
• Plash Lifetime Warranty

WIRING

• BLACK wire = Ground  (for LED in Switch)
• ORANGE wire = Positive (for LED in Switch)
• BLUE wire = Normally Closed input
• YELLOW wire = Normally Closed output
• RED wire = Normally Open input
• BROWN wire = Normally Open output 

 FEATURES

• Stainless Steel Housing - No Rust
• Rated for 15A
• 22mm (7/8") Diameter Button - Easier to Push Compared to 19mm
• 25mm (1") Outside Diameter
• LED Backlit Ring in your Choice of Colors
• IP67 Rated - Waterproof
• Silky Smooth Movement
• Rated for 500,000 Cycles
• Removable Clip for Wiring Harness
• 3ft of 14AWG Copper Tinned Wiring for a Simple Installation
• Fits a 7/8" Hole
• Plash Lifetime Warranty

WIRING

• BLACK wire = Ground  (for LED in Switch)
• ORANGE wire = Positive (for LED in Switch)
• BLUE wire = Normally Closed input
• YELLOW wire = Normally Closed output
• RED wire = Normally Open input
• BROWN wire = Normally Open output 

FEATURES

• Stainless Steel Housing - No Rust
• Rated for 15A
• 22mm (7/8") Diameter Button - Easier to Push Compared to 19mm
• 25mm (1") Outside Diameter
• LED Backlit Ring in your Choice of Colors
• IP67 Rated - Waterproof
• Silky Smooth Movement
• Rated for 50,000 Cycles
• Removable Clip for Wiring Harness
• 3ft of 14AWG Copper Tinned Wiring for a Simple Installation
• Fits a 7/8" Hole
• Plash Lifetime Warranty

WIRING

• BLACK wire = Ground  (for LED in Switch)
• ORANGE wire = Positive (for LED in Switch)
• BLUE wire = Normally Closed input
• YELLOW wire = Normally Closed output
• RED wire = Normally Open input
• BROWN wire = Normally Open output 

FEATURES

• Stainless Steel Housing - No Rust
• Rated for 15A
• 22mm (7/8") Diameter Button - Easier to Push Compared to 19mm
• 25mm (1") Outside Diameter
• LED Backlit Ring in your Choice of Colors
• IP67 Rated - Waterproof
• Silky Smooth Movement
• Rated for 50,000 Cycles
• Removable Clip for Wiring Harness
• 3ft of 14AWG Copper Tinned Wiring for a Simple Installation
• Fits a 7/8" Hole
• Plash Lifetime Warranty

WIRING

• BLACK wire = Ground  (for LED in Switch)
• ORANGE wire = Positive (for LED in Switch)
• BLUE wire = Normally Closed input
• YELLOW wire = Normally Closed output
• RED wire = Normally Open input
• BROWN wire = Normally Open output 

FEATURES:

• Rated for 20A
• Stainless Steel Housing - No Rust
• Simply remove the switch and rotate it 180° to change from "LED Always On" to "LED On When Pressed."
• 22mm (7/8") Diameter Button - Easier to Push Compared to 19mm
• 25mm (1") Outside Diameter
• Works on 12V or 24V Systems
• LED Backlit Ring in your Choice of Colors
• IP67 Rated - Waterproof
• Silky Smooth Movement
• Rated for 150,000 Cycles (Presses)
• Removable Clip for Wiring Harness
• 3ft of 14AWG Wiring for a Simple Installation
• Mounts in panels up to 3/8" thick
• Fits a 7/8" Hole
• Plash Limited Lifetime Warranty

WIRING:

• BLACK wire = Ground   
• RED wire = Positive V+
• BLUE wire = Ground
• BROWN wire = Positive V+ 

 There are many options when it comes to wiring configuration such as do you want the LED ring to be on all the time, only when the navigation lights are on, or only when the switch is pressed?  Depending on how you wire the switch, and the orientation of the switch, you can decide which function suits you best.

FEATURES:

• Rated for 10A
• Stainless Steel Housing - No Rust
• Simply wire according to the instructions for your choice of color options for both when latched and unlatched. Example: Blue turns to Teal (or pink) when pressed.
• 22mm (7/8") Diameter Button - Easier to Push Compared to 19mm
• 25mm (1") Outside Diameter
• Works on 12V or 24V Systems
• LED Backlit Ring in your Choice of Colors
• IP67 Rated - Waterproof
• Silky Smooth Movement
• Rated for 150,000 Cycles (Presses)
• Removable Clip for Wiring Harness
• 3ft of 14AWG Wiring for a Simple Installation
• Mounts in panels up to 3/8" thick
• Fits a 7/8" Hole
• Plash Limited Lifetime Warranty

WIRING:

• BROWN 14 AWG wire = Positive V+ Out to Load   
• RED 14 AWG wire = Positive V+ From Fuse Panel
• BLACK 18 AWG wire =  Ground
• BLUE 18 AWG wire = Positive V+
• RED 18 AWG wire = Postive V+
• GREEN18 AWG wire = Positive V+

 There are many options when it comes to wiring configuration such as do you want the LED ring to be on all the time, only when the navigation lights are on, or only when the switch is pressed?  Depending on how you wire the switch, and the orientation of the switch, you can decide which function suits you best.

FEATURES:

• Rated for 20A
• Stainless Steel Housing - No Rust
• Simply remove the switch and rotate it 180° to change from "LED Always On" to "LED On When Pressed."
• 22mm (7/8") Diameter Button - Easier to Push Compared to 19mm
• 25mm (1") Outside Diameter
• Works on 12V or 24V Systems
• LED Backlit Ring in your Choice of Colors
• IP67 Rated - Waterproof
• Silky Smooth Movement
• Rated for 150,000 Cycles (Presses)
• Removable Clip for Wiring Harness
• 3ft of 14AWG Wiring for a Simple Installation
• Mounts in panels up to 3/8" thick
• Fits a 7/8" Hole
• Plash Limited Lifetime Warranty

WIRING:

• BLACK wire = Ground   
• RED wire = Positive V+
• BLUE wire = Ground
• BROWN wire = Positive V+ 

 There are many options when it comes to wiring configuration such as do you want the LED ring to be on all the time, only when the navigation lights are on, or only when the switch is pressed?  Depending on how you wire the switch, and the orientation of the switch, you can decide which function suits you best.