Login
See us on:
Visit CP on Facebook Visit CP on Instagram Visit CP on YouTube
Is your boat in the gallery?
Image Gallery  
Instructions & Guides:
Instructions  
Find Parts by Mercury Model:
OEM Part Finder  
What's popular today?
Popular Items  
What are you looking for Today?

Need Help? Call Us:

1-800-225-9871

Outside the USA? Call 707-585-9871


Items Per Page:
55 Results (Viewing 1 - 12 of 55)
Olds Steel Valve Cover Bolt Kit
Your Price:
$16.99

Olds Steel Valve Cover Bolt Kit

620-53104

Stainless Steel Bolt Kits - Olds Steel Valve Cover Bolt Kit
We offer a full selection of manifold bolt kits to fit most popular marine engines.  These kits come complete with the correct number of b

Lightning Narrow Big Block Chevy Freshwater Merc Headers 33" Wide
Starting From:
$3,689.99

This Part has options, please click the button below to order.

Lightning Narrow Big Block Chevy Freshwater Merc Headers 33" Wide

310-40 + Option(s)

Narrow Big Block Chevy Freshwater Merc Kit 33" Wide

THE ULTIMATE "FRESH WATER" EXHAUST SYSTEM

Finally an affordable alternative to all stainless steel water jacketed headers. For the thousands of pleasure boaters "NOT" affected by the corrosion problems associated with Salt Water there is at last the availability of a true tubular header system for the Fresh Water boater. These headers are designed to be a replacement for Mercury manifolds. However, they terminate approximately 8" aft of stock manifolds and are projected to meet the exhaust tips providing they are in the stock location. Low Port Headers are also available for under the swim step applications. Standard width headers will have about 1/2" clearance between header and tall style Moroso valve cover. Headers come complete with bolts, gaskets, water fittings, pet cocks, etc. (less 4" hose and 4" hose clamps). Factory oil filter requires relocation.

THE LIGHTNING CONSTRUCTION DIFFERENCE IS WHAT COUNTS !
Our Magnum header starts with Mandrel bent 316L stainless steel interior tubes. The exterior tubes are Mandrel bent heavy wall steel tube (.074). The tubes are then mechanically etched by sand blasting and then assembled. Finally,a corrosion resistant silicone ceramic coating is applied to the interior of the header while the exterior receives a powder coat finish.

ALL THIS PLUS THE BEST 2-YEAR WARRANTY IN THE INDUSTRY

Through continuing research Lightning Mfg. has developed a Dual Porcelain Coating that resists corrosive water environments. Now able to apply the same high tech coating to the fresh water series of steel outer lined thus aiding in the prevention cracking and deterioration.

NOTE: LIGHTNING HEADERS HAVE A 4-6 WEEKS BUILD TIME.

Standard Big Block Chevy Freshwater Merc Headers 36" Wide
Starting From:
$3,289.99

This Part has options, please click the button below to order.

Lightning Big Block Chevy Freshwater Merc Headers 36" Wide

310-40 + Option(s)

Standard Big Block Chevy Freshwater Merc Kit 36" Wide - STOCK Measurements

THE ULTIMATE "FRESH WATER" EXHAUST SYSTEM

Finally an affordable alternative to all stainless steel water jacketed headers. For the thousands of pleasure boaters "NOT" affected by the corrosion problems associated with Salt Water there is at last the availability of a true tubular header system for the Fresh Water boater. These headers are designed to be a replacement for Mercury manifolds. However, they terminate approximately 8" aft of stock manifolds and are projected to meet the exhaust tips providing they are in the stock location. Low Port Headers are also available for under the swim step applications. Standard width headers will have about 1/2" clearance between header and tall style Moroso valve cover. Headers come complete with bolts, gaskets, water fittings, pet cocks, etc. (less 4" hose and 4" hose clamps). Factory oil filter requires relocation.

THE LIGHTNING CONSTRUCTION DIFFERENCE IS WHAT COUNTS !
Our Magnum header starts with Mandrel bent 316L stainless steel interior tubes. The exterior tubes are Mandrel bent heavy wall steel tube (.074). The tubes are then mechanically etched by sand blasting and then assembled. Finally,a corrosion resistant silicone ceramic coating is applied to the interior of the header while the exterior receives a powder coat finish.

ALL THIS PLUS THE BEST 2-YEAR WARRANTY IN THE INDUSTRY

Through continuing research Lightning Mfg. has developed a Dual Porcelain Coating that resists corrosive water environments. Now able to apply the same high tech coating to the fresh water series of steel outer lined thus aiding in the prevention cracking and deterioration.

NOTE: LIGHTNING HEADERS HAVE A 4-6 WEEKS BUILD TIME.

460 Ford OMC Headers 39" Wide
Starting From:
$3,950.99

This Part has options, please click the button below to order.

460 Ford OMC Headers 39" Wide

310-40 + Option(s)

460 Ford Freshwater OMC Kit 39" Wide - Note: This package uses BBC headers with adapters to fit Ford Engines.

THE ULTIMATE "FRESH WATER" EXHAUST SYSTEM

Finally an affordable alternative to all stainless steel water jacketed headers. For the thousands of pleasure boaters "NOT" affected by the corrosion problems associated with Salt Water there is at last the availability of a true tubular header system for the Fresh Water boater. These headers are designed to be a replacement for Mercury manifolds. However, they terminate approximately 8" aft of stock manifolds and are projected to meet the exhaust tips providing they are in the stock location. Low Port Headers are also available for under the swim step applications. Standard width headers will have about 1/2" clearance between header and tall style Moroso valve cover. Headers come complete with bolts, gaskets, water fittings, pet cocks, etc. (less 4" hose and 4" hose clamps). Factory oil filter requires relocation.

THE LIGHTNING CONSTRUCTION DIFFERENCE IS WHAT COUNTS !
Our Magnum header starts with Mandrel bent 316L stainless steel interior tubes. The exterior tubes are Mandrel bent heavy wall steel tube (.074). The tubes are then mechanically etched by sand blasting and then assembled. Finally,a corrosion resistant silicone ceramic coating is applied to the interior of the header while the exterior receives a powder coat finish.

ALL THIS PLUS THE BEST 2-YEAR WARRANTY IN THE INDUSTRY

Through continuing research Lightning Mfg. has developed a Dual Porcelain Coating that resists corrosive water environments. Now able to apply the same high tech coating to the fresh water series of steel outer lined thus aiding in the prevention cracking and deterioration.

NOTE: LIGHTNING HEADERS HAVE A 4-6 WEEKS BUILD TIME.

460 Ford Jet Drive Headers 39" Wide
Starting From:
$3,950.99

This Part has options, please click the button below to order.

460 Ford Jet Drive Headers 39" Wide

310-40 + Option(s)

460 Ford Freshwater Jet Kit 39" Wide - Note: This package uses BBC headers with adapters to fit Ford Engines.

THE ULTIMATE "FRESH WATER" EXHAUST SYSTEM

Finally an affordable alternative to all stainless steel water jacketed headers. For the thousands of pleasure boaters "NOT" affected by the corrosion problems associated with Salt Water there is at last the availability of a true tubular header system for the Fresh Water boater. These headers are designed to be a replacement for Mercury manifolds. However, they terminate approximately 8" aft of stock manifolds and are projected to meet the exhaust tips providing they are in the stock location. Low Port Headers are also available for under the swim step applications. Standard width headers will have about 1/2" clearance between header and tall style Moroso valve cover. Headers come complete with bolts, gaskets, water fittings, pet cocks, etc. (less 4" hose and 4" hose clamps). Factory oil filter requires relocation.

THE LIGHTNING CONSTRUCTION DIFFERENCE IS WHAT COUNTS !
Our Magnum header starts with Mandrel bent 316L stainless steel interior tubes. The exterior tubes are Mandrel bent heavy wall steel tube (.074). The tubes are then mechanically etched by sand blasting and then assembled. Finally,a corrosion resistant silicone ceramic coating is applied to the interior of the header while the exterior receives a powder coat finish.

ALL THIS PLUS THE BEST 2-YEAR WARRANTY IN THE INDUSTRY

Through continuing research Lightning Mfg. has developed a Dual Porcelain Coating that resists corrosive water environments. Now able to apply the same high tech coating to the fresh water series of steel outer lined thus aiding in the prevention cracking and deterioration.

NOTE: LIGHTNING HEADERS HAVE A 4-6 WEEKS BUILD TIME.

Big Block Chevy Freshwater Low Port Headers 33" Wide, 12" Drop
Starting From:
$3,899.99

This Part has options, please click the button below to order.

Lightning Narrow Big Block Chevy Low Port Headers 33" Wide

310-40 + Option(s)

Big Block Chevy Freshwater Low Port Kit 33" Wide, 12" Drop

  • Available in: Black or Silver Powder Coated
  • Material: 316L stainless Steel
  • Width: 33"
  • Depth: 12"
  • Included:
    • Bolts, Gaskets, Water fittings, Pet cocks, etc. (less 4" hose and 4" hose clamps)
  • Replaces: Mercury, OMC or Jet manifolds

THE ULTIMATE "FRESH WATER" EXHAUST SYSTEM

Finally an affordable alternative to all stainless steel water jacketed headers. For the thousands of pleasure boaters "NOT" affected by the corrosion problems associated with Salt Water there is at last the availability of a true tubular header system for the Fresh Water boater. These headers are designed to be a replacement for Mercury, OMC or jet manifolds. However, they terminate approximately 8" aft of stock manifolds and are projected to meet the exhaust tips providing they are in the stock location. Low Port Headers are also available for under the swim step applications. Standard width headers will have about 1/2" clearance between header and tall style Moroso valve cover. Headers come complete with bolts, gaskets, water fittings, pet cocks, etc. (less 4" hose and 4" hose clamps). Factory oil filter requires relocation.

THE LIGHTNING CONSTRUCTION DIFFERENCE IS WHAT COUNTS !

Our Magnum header starts with Mandrel bent 316L stainless steel interior tubes. The exterior tubes are Mandrel bent heavy wall steel tube (.074). The tubes are then mechanically etched by sand blasting and then assembled. Finally,a corrosion resistant silicone ceramic coating is applied to the interior of the header while the exterior receives a powder coat finish.

ALL THIS PLUS THE BEST 2-YEAR WARRANTY IN THE INDUSTRY

Through continuing research Lightning Mfg. has developed a Dual Porcelain Coating that resists corrosive water environments. Now able to apply the same high tech coating to the fresh water series of steel outer lined thus aiding in the prevention cracking and deterioration.

NOTE:ALL LIGHTNING HEADERS ARE BUILT TO ORDER IN 4-6 WEEKS

Standard Jacketed Header - Big Block Chevy Jet Drive 36" Wide
Starting From:
$3,199.99

This Part has options, please click the button below to order.

Lightning Big Block Chevy Jet Drive 36" Wide Standard Jacketed Header

310-40 + Option(s)

Standard Jacketed Header - Big Block Chevy Jet Drive 36" Wide

These headers are designed to be a replacement for Jet manifolds. However, they terminate approximately 8" aft of stock manifolds and are projected to meet the exhaust tips providing they are in the stock location. Headers will have about 1/2" clearance between header and tall Moroso valve covers. Headers come complete with bolts, gaskets, water fittings, pet cocks, etc. (less 4" hose and 4" hose clamps). Factory oil filter requires relocation.

LIGHTNING PERFORMANCE
When comparing performance exhaust systems it's good to understand the different systems on the market today and the performance demands of your engine. Understanding how a header works will help you decide on which exhaust system is best suited for your application.

Headers have two basic functions. First is to simply relieve back pressure. For example, when looking at a manifold you see a 4" diameter exhaust hose, but the actual exhaust gas opening is about 2-1/2" diameter. Most performance manifolds and some header manufacturers use a 4" exhaust hose and 3" or 3-1/2" OD exhaust gas tube. All of these headers use a 4" OD exhaust gas tube and a 5" water jacket tube until the water gets introduced into the exhaust gas stream, then it gets reduced from 5" to its 4" exhaust hose diameter. At no time does the exhaust gases see a diameter smaller than 4" OD. When looking at these exhaust gas openings consider their area not their diameter. For example, a 4" OD opening has an area of approximately 12.56 sq. in. A 3-1/2" opening has an area of approximately 9.62 sq. in.That is 25% smaller! A 3" opening is approximately 7.06 sq. in. and a 2-1/2" opening is approximately 4.90 sq. in. which is 60% smaller.

LIGHTNING HORSE POWER COMPARISON
Performance figures on headers vary considerably. As a rule, the higher horsepower engines benefit more than the lower horsepower engines. For example, the 330 hp Mercury engine will gain approximately 50 to 75 rpm, where as the 365 hp Mercury engine will gain approximately 300 to 400 rpm (45 hp). Blown engines gain up to 800 rpm (80 hp). Of course this is comparing these headers against stock Mercury center rise manifolds.

LIGHTNING CONSTRUCTION
Our Magnum header starts with Mandrel bent 316L stainless steel interior tubes. The exterior tubes are Mandrel bent heavy wall steel tube (.074). The tubes are then mechanically etched by sand blasting and then assembled. Finally, a corrosion resistant silicone ceramic coating is applied to the interior of the header while the exterior receives a powder coat finish.

ALL THIS PLUS THE BEST 2-YEAR WARRANTY IN THE INDUSTRY

Through continuing research Lightning Mfg. has developed a Dual Porcelain Coating that resists the harshest of salt water environments. Now as an option they are able to apply the same high tech coating to a 316L stainless steel lined header once thought to be the cracking alloy and render it crack resistant.

NOTE: LIGHTNING HEADERS HAVE A 4-6 WEEKS BUILD TIME.

Standard Jacketed Header - 496 8.1L Mercury 37" Wide
Starting From:
$3,859.99

This Part has options, please click the button below to order.

Lightning 496 8.1L Mercury 37" Wide Freshwater Headers

310-40 + Option(s)

  • Replacement for Mercury 496 Manifolds
  • For Freshwater Applications
  • Comes complete with bolts, gaskets, water fittings.
  • Includes Shift and oil filter bracket
  • 2" Primary Tube
  • 37" Wide, see specs for detailed measurements
  • See Additional info for more details on Lightning Headers
  • NOTE ALL LIGHTNING HEADERS ARE BUILT TO ORDER IN 4-6 WEEKS

Below Swim Platform Low Port Exit Jacketed Headers - 454/502 Chevy
Starting From:
$3,725.99

This Part has options, please click the button below to order.

Lightning Big Block Chevy Low Port Exit Jacketed Headers 36" Wide

310-40 + Option(s)

Below Swim Platform Low Port Exit Jacketed System - 454/502 Chevy Low Port Headers 36" Wide

These headers are designed to be a replacement for Mercury, OMC or jet manifolds whenthe exhaust ports are mounted low in the boat. For example, under the swim step or whenelbows are used with the stock manifolds. Headers will have about 1/2" clearance between headerand tall Moroso valve covers. Headers come complete with bolts, gaskets, water fittings, petcocks, 4" elbows for bottom, etc. (less 4" hose and 4" hose clamps). Factory oil filterrequires relocation.

LIGHTNING PERFORMANCE
When comparing performance exhaust systems it's good to understand the different systems on the market today and the performance demands of yourengine. Understanding how a header works will help you decide on which exhaust system is best suited for your application.

Headers have two basic functions. First is to simply relieve back pressure. For example, when looking at a manifold you see a 4" diameter exhaust hose, but theactual exhaust gas opening is about 2-1/2" diameter. Most performance manifolds and some header manufacturers use a 4" exhaust hose and 3" or 3-1/2" OD exhaustgas tube. All of these headers use a 4" OD exhaust gas tube and a 5" water jacket tube until the water gets introduced into the exhaust gas stream, then it getsreduced from 5" to its 4" exhaust hose diameter. At no time does the exhaust gases see a diameter smaller than 4" OD. When looking at these exhaust gas openingsconsider their area not their diameter. For example, a 4" OD opening has an area of approximately 12.56 sq. in. A 3-1/2" opening has an area of approximately 9.62 sq. in.That is 25% smaller! A 3" opening is approximately 7.06 sq. in. and a 2-1/2" opening is approximately 4.90 sq. in. which is 60% smaller.

LIGHTNING HORSE POWER COMPARISON
Performance figures on headers vary considerably. As a rule, the higher horsepower engines benefit more than the lower horsepower engines. For example, the 330hp Mercury engine will gain approximately 50 to 75 rpm, where as the 365 hp Mercury engine will gain approximately 300 to 400 rpm (45 hp). Blown engines gain upto 800 rpm (80 hp). Of course this is comparing these headers against stock Mercury center rise manifolds.

LIGHTNING CONSTRUCTION
Our Magnum header starts with Mandrel bent 316L stainless steel interior tubes. The exterior tubes are Mandrel bent heavy wall steel tube (.074). The tubes arethen mechanically etched by sand blasting and then assembled. Finally, a corrosion resistant silicone ceramic coating is applied to the interior of the header while theexterior receives a powder coat finish.

ALL THIS PLUS THE BEST 2-YEAR WARRANTY IN THE INDUSTRY

Through continuing research Lightning Mfg. has developed a Dual Porcelain Coating that resists the harshest of salt water environments. Now as an option theyare able to apply the same high tech coating to a 316L stainless steel lined header once thought to be the cracking alloy and render it crack resistant.

NOTE: ALL LIGHTNING HEADERS ARE BUILT TO ORDER IN 4-6 WEEKS

Below Swim Platform Low Port Exit Jacketed Headers - 460 Ford
Starting From:
$4,339.99

This Part has options, please click the button below to order.

Below Swim Platform Low Port Exit Jacketed Headers - 460 Ford

310-40 + Option(s)

Below Swim Platform Low Port Exit Jacketed Headers - 460 Ford, 39" Wide - Note: This package uses BBC headers with adapters to fit Ford Engines.

THE ULTIMATE "FRESH WATER" EXHAUST SYSTEM

Finally an affordable alternative to all stainless steel water jacketed headers. For the thousands of pleasure boaters "NOT" affected by the corrosion problems associated with Salt Water there is at last the availability of a true tubular header system for the Fresh Water boater. These headers are designed to be a replacement for Mercury manifolds. However, they terminate approximately 8" aft of stock manifolds and are projected to meet the exhaust tips providing they are in the stock location. Low Port Headers are also available for under the swim step applications. Standard width headers will have about 1/2" clearance between header and tall style Moroso valve cover. Headers come complete with bolts, gaskets, water fittings, pet cocks, etc. (less 4" hose and 4" hose clamps). Factory oil filter requires relocation.

THE LIGHTNING CONSTRUCTION DIFFERENCE IS WHAT COUNTS !
Our Magnum header starts with Mandrel bent 316L stainless steel interior tubes. The exterior tubes are Mandrel bent heavy wall steel tube (.074). The tubes are then mechanically etched by sand blasting and then assembled. Finally,a corrosion resistant silicone ceramic coating is applied to the interior of the header while the exterior receives a powder coat finish.

ALL THIS PLUS THE BEST 2-YEAR WARRANTY IN THE INDUSTRY

Through continuing research Lightning Mfg. has developed a Dual Porcelain Coating that resists corrosive water environments. Now able to apply the same high tech coating to the fresh water series of steel outer lined thus aiding in the prevention cracking and deterioration.

NOTE: LIGHTNING HEADERS HAVE A 4-6 WEEKS BUILD TIME.

Standard Jacketed Header - S/B Chevy 350 Mercury 31" Wide
Starting From:
$3,599.99

This Part has options, please click the button below to order.

Lightning Small Block Chevy 350 Mercury 31.5" Wide Headers

310-40 + Option(s)

Standard Jacketed Header - S/B Chevy 350 Mercury 31.5" Wide

These headers are designed to be a replacement for Mercury, OMC or jet manifolds.However, they terminate approximately 8" aft of stock manifolds and are projected to meet theexhaust tips providing they are in the stock location. Headers will have about 1/2" clearancebetween header and tall Moroso valve covers. Headers come complete with bolts, gaskets, waterfittings, pet cocks, etc. (less 4" hose and 4" hose clamps). Factory oil filter requires relocation.

LIGHTNING PERFORMANCE
When comparing performance exhaust systems it's good to understand the different systems on the market today and the performance demands of yourengine. Understanding how a header works will help you decide on which exhaust system is best suited for your application.

Headers have two basic functions. First is to simply relieve back pressure. For example, when looking at a manifold you see a 4" diameter exhaust hose, but theactual exhaust gas opening is about 2-1/2" diameter. Most performance manifolds and some header manufacturers use a 4" exhaust hose and 3" or 3-1/2" OD exhaustgas tube. All of these headers use a 4" OD exhaust gas tube and a 5" water jacket tube until the water gets introduced into the exhaust gas stream, then it getsreduced from 5" to its 4" exhaust hose diameter. At no time does the exhaust gases see a diameter smaller than 4" OD. When looking at these exhaust gas openingsconsider their area not their diameter. For example, a 4" OD opening has an area of approximately 12.56 sq. in. A 3-1/2" opening has an area of approximately 9.62 sq. in.That is 25% smaller! A 3" opening is approximately 7.06 sq. in. and a 2-1/2" opening is approximately 4.90 sq. in. which is 60% smaller.

LIGHTNING HORSE POWER COMPARISON
Performance figures on headers vary considerably. As a rule, the higher horsepower engines benefit more than the lower horsepower engines. For example, the 330hp Mercury engine will gain approximately 50 to 75 rpm, where as the 365 hp Mercury engine will gain approximately 300 to 400 rpm (45 hp). Blown engines gain upto 800 rpm (80 hp). Of course this is comparing these headers against stock Mercury center rise manifolds.

LIGHTNING CONSTRUCTION
Our Magnum header starts with Mandrel bent 316L stainless steel interior tubes. The exterior tubes are Mandrel bent heavy wall steel tube (.074). The tubes arethen mechanically etched by sand blasting and then assembled. Finally, a corrosion resistant silicone ceramic coating is applied to the interior of the header while theexterior receives a powder coat finish.

ALL THIS PLUS THE BEST 2-YEAR WARRANTY IN THE INDUSTRY

Through continuing research Lightning Mfg. has developed a Dual Porcelain Coating that resists the harshest of salt water environments. Now as an option theyare able to apply the same high tech coating to a 316L stainless steel lined header once thought to be the cracking alloy and render it crack resistant.

NOTE: ALL LIGHTNING HEADERS ARE BUILT TO ORDER IN 4-6 WEEKS

Lightning Big Block Chevy Big Tube Headers 2-1/4" Primaries
Starting From:
$4,699.99

This Part has options, please click the button below to order.

Lightning Big Block Chevy Big Tube Headers 2-1/4" Primaries

310-40 + Option(s)

Big Tube 2-1/4" Big Block Chevy Freshwater Merc Kit 36" Wide - STOCK Measurements

THE ULTIMATE "FRESH WATER" EXHAUST SYSTEM

Finally an affordable alternative to all stainless steel water jacketed headers. For the thousands of pleasure boaters "NOT" affected by the corrosion problems associated with Salt Water there is at last the availability of a true tubular header system for the Fresh Water boater. These headers are designed to be a replacement for Mercury manifolds. However, they terminate approximately 8" aft of stock manifolds and are projected to meet the exhaust tips providing they are in the stock location. Low Port Headers are also available for under the swim step applications. Standard width headers will have about 1/2" clearance between header and tall style Moroso valve cover. Headers come complete with bolts, gaskets, water fittings, pet cocks, etc. (less 4" hose and 4" hose clamps). Factory oil filter requires relocation.

THE LIGHTNING CONSTRUCTION DIFFERENCE IS WHAT COUNTS !
Our Magnum header starts with Mandrel bent 316L stainless steel interior tubes. The exterior tubes are Mandrel bent heavy wall steel tube (.074). The tubes are then mechanically etched by sand blasting and then assembled. Finally,a corrosion resistant silicone ceramic coating is applied to the interior of the header while the exterior receives a powder coat finish.

ALL THIS PLUS THE BEST 2-YEAR WARRANTY IN THE INDUSTRY

Through continuing research Lightning Mfg. has developed a Dual Porcelain Coating that resists corrosive water environments. Now able to apply the same high tech coating to the fresh water series of steel outer lined thus aiding in the prevention cracking and deterioration.

NOTE: LIGHTNING HEADERS HAVE A 4-6 WEEKS BUILD TIME.

55 Results (Viewing 1 - 12 of 55)
Loading...