TBS Pulley Spacers are machined from the same high quality billet aluminum as TBS’s signature billet Supercharger cases. Machined to precise specifications, there are a variety of sizes that may be mixed and stacked together to provide the necessary clearances. The spacers have the same 2 inch register and 6 hole universal pattern as The Blower Shop's Blower Pulleys. Extreme care should be taken to install a flat and straight spacer. This will eliminate excessive “Pulley Wobble”.
Patented field reversible handle allows you to select the closed position orientation (clockwise or counterclockwise) that best suits the installation. Handle has square hole to accept standard ratchet, to help reach valves in hard-to-reach locations and ease actuation of difficult to operate valves. 400 WOG rated. Stainless steel handle and hardware. Chrome plated solid brass ball (not a hollow ball). PTFE seats and seals. UL Listed for fuel or water.NOT TO BE USED IN POTABLE WATER SYSTEMS.
Patented field reversible handle allows you to select the closed position orientation (clockwise or counterclockwise) that best suits the installation. Handle has square hole to accept standard ratchet, to help reach valves in hard-to-reach locations and ease actuation of difficult to operate valves. 400 WOG rated. Stainless steel handle and hardware. Chrome plated solid brass ball (not a hollow ball). PTFE seats and seals. UL Listed for fuel or water. 1-1/4" and larger valves include a zerk fitting for easy lubrication or draining.
Standard single strainers. No tie rods or leaks under pressure or vacuum. Quick and easy mounting system allowing removal of strainer without tools. #304 Stainless steel filter basket. O-ring seals at strainer cap and between strainer head and sight glass. See-thru screw-on strainer cap allows easy, no-tools maintenance. Spanner wrench holes in cover allow the use of SW-2531 wrench. Install with pipe or hose. Do not use chemical or abrasive cleaners on sight glass. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Standard single strainers. No tie rods or leaks under pressure or vacuum. Quick and easy mounting system allowing removal of strainer without tools. #304 Stainless steel filter basket. O-ring seals at strainer cap and between strainer head and sight glass. See-thru screw-on strainer cap allows easy, no-tools maintenance. Spanner wrench holes in cover allow the use of SW-2531 wrench. Install with pipe or hose. Do not use chemical or abrasive cleaners on sight glass.NOT TO BE USED IN POTABLE WATER SYSTEMS.
Designed to work with The Blower Shop's Front Discharge Superchargers this billet plate will set your Blower back 2 1/4″. Positioning the bottom outlet closer to the center of the manifold, this change in positioning effects the air/fuel mixture that is pushed through the manifold. Race Application Only.
