Need the complete solution? The Exhaust Cut-Out Kit is your answer! Includes Tips, Diverters, Actuator, Hose and Clamps. Standard Kit includes two 8" long sections of 4" exhaust hose and straight cut tips. These kits are designed to be fitted in stock bravo exhaust locations. See this measurement sheet for more info. If you must place tips in a different location more hose and angle bends may be required. Call us if you need any assistance. Angle cut tips and longer hose available by special order.
These diverters will fit Bravo and Alpha applications 1987 and up they will not fit the 8.1 engines, OMC or Volvos.
The Mercury 350 dry joint exhaust will not work with the Hardin diverter. Corsa has a set part number 270-61000 for standard non riser spacers. If there is space, we need to know if it is 3" or 6" and Corsa can build a custom set.
Small Block Chevy '57-'95 Polished Intake Manifold, Idle to 5500 RPM
If you need proven performance, look no further than the Hardin Marine SE Dual Plane series intake manifold, and you can have confidence that you are getting an intake perfect for any 250H/P to 350H/P engine application.
Identifying the function of each push button switch is simple with the interchangeable 3M adhesive backed actuator PU Dome Backlit Labels. These labels are used when using translucent actuator buttons that allows the LEDs in the switch body to pass light through the label. The result is excellent visibility at night. There are over 100 Switch Function Icons to choose from.
Features & Benefits:
Over 100 Interchangeable 3M Adhesive Backed PU Dome Backlit Function Icon Labels to choose from.
Replacement electric motor only. Fits many Livorsi hatch ram, Warner Hatch ram, Hardin Hatch ram and Thomson
Hatch ram models. Mounting Bolt Center to Center is 2"
NOTE: These are NEW "Old Stock" Items and are NON-RETURNABLE. Make sure this will fit your application before purchasing!
Starting From:
$7.99
This Part has options, please click the button below to order.
T-bolt clamps are the very best clamp money can buy. They are virtually impervious to harsh elements and are super-strong. If you want the best, use T-bolt clamps. Available in many sizes from 1" to 6"
100-720-1000, use with 1" hard wall hose
100-720-1060, use with 1-1/4" hard wall hose
100-720-1120, use with 1-1/2" Fuel Fill hose
100-720-2000, use with 2" Fuel Fill hose
100-720-2120, use with 2-1/2" Water or Exhaust hose
100-720-3000, use with 2-7/8" and 3" Exhaust hose
100-720-3120, use with 3-1/2" Exhaust hose
100-720-4000, use with 4" Exhaust hose
100-720-4120, use with 4-1/2" Exhaust hose
100-720-5000, use with 5" Exhaust hose
Starting From:
$399.99
This Part has options, please click the button below to order.
Don't be fooled by the name "AutoMeter" When we talk about "Marine Gauges" no one knows how to build more durable instruments than the guys that build nearly every racing gauge in the market today. The "MARINE DIFFERENCE" comes in the construction of a marine gauge . These gauges feature aluminum or plastic non-corrosive cases (automotive versions are steel). These marine gauges also use non-corrosive mounting hardware with weather resistant sealed lenses. Superior quality internal components and UV fade resistant race pointers insure accurate and rapid gauge response readings. Autometer comes with White Lights with Red and Green removable bulb covers.
Autometer Standard Size Single Inboard Engine Five Gauge Kits are available as shown below in White, Platinum, Chrome, and Carbon Fiber Varieties and include:
3-3/8" 6000 or 8000 or 10000 RPM Tachometer
2-1/16" Voltmeter
2-1/16" Fuel Level
2-1/16" Oil Pressure
2-1/16" Water Temperature
Need help measuring your gauges so you know what to look for when you finally upgrade to a more polished set? Check out this handy tutorial!
Starting From:
$177.99
This Part has options, please click the button below to order.
3-3/8" 0-6000 RPM Tachometer Gauge - White or Black
Very easy to read at high speeds
Handmade, hand calibrated, tested for accuracy and BUILT IN THE USA!!
Bold, Plastic body, clear dials, white back light, and a red competition style needle
Non-corrosive hardware and case
Gasket sealed lens and bezel to prevent fogging
3-3/8" hole size, Outer diameter 3-7/8"
Not Designed to be used with Diesel Engines or Outboard Engines.
Hardin tachometers provide the ultimate in readability and accuracy. These tachometers feature non-corrosive hardware and gasket sealed lens and bezel to prevent fogging Each tachometer is built to withstand the severest of conditions. Each tachometer can be calibrated to work with 4, 6, and 8 cylinder engines. Hardin Marine gauges come with white lights.
Need help measuring your gauges so you know what to look for when you finally upgrade to a more polished set? Check out this handy tutorial!
You can now rent the Berkeley factory tool set to
rebuild your jet drive in your garage. This rental kit will come with the
impeller puller, impeller socket, bowl bearing removal and installation tool,
seal drivers, and a splined shaft socket, to make
quick work of the toughest parts of the rebuild process. You can now rent the
tools used by Berkeley professionals for years at a fraction of the cost.
Rental Cost Breakdown:
$75.00 rental fee
$415.00 deposit required (plus sales tax if located in
California or Florida) (Refunded when returned)
$150.00 late fee after 2 week rental period, not
returnable after 30 days
Rental Terms
Rental period is for 2 weeks from time of delivery,
tools returned late (after 15 days and before 30 days) are subject to a $150.00
late fee and are not returnable after 30 days. When tools are returned within
the allowed time period you will be credited back $275.00 of your $350.00
deposit with the remaining $75.00 going to the rental fee. Any tools not
returned or returned damaged will be deducted from the deposit at the current
retail price.
This billet aluminum stuffer mounts into the bowl directly behind the impeller. By closing up this clearance the hydro flow dynamics of the water exiting the impeller is substantially increased. The result is improved hole shot and acceleration.
Note: This bowl stuffer is for use with a non-shoulder wear ring.
High Speed Saginaw Style Power Steering Pump - 1500 PSI
This all new performance power steering pump is a direct replacement for most GM P-series Saginaw OEM power steering pumps. These pumps produce an increase of pressure thus aiding in low speed steering response.
NOTE: Reservoir is sold separately.
Why is this pump better?
The bearing snout is machined to replace the stock bronze bushing with #203 needle bearing.
The shaft is machined from 4140 tool steel and is heat treated to 75/80 Rockwell. Will not break if you dead head the pump.
The shaft has dual thrust washers to insure control forward and rear movement when under load.
The main boring housing is machined to a larger diameter to clean up wore surface. Larger ring, rotor and vanes are installed.
The main oil passage is enlarge for greater flow
Flow valve bore is machined larger. Unit comes with larger valve and spring.
Our pumps flows 4-3/4 to 5-1/4 GPM. Double the output than a stock Saginaw "P" series pump.